journal article·2021-03

High-volume ultrafine fly ash-cement slurry mechanical properties and strength development model establishment

Chao Zhang, Jianxin Fu, Weidong Song, Cuifeng Du, Hantao Fu

Publisher page

Abstract

Abstract This paper, orthogonal experiments were designed to study the changes of water separation rate, concretion rate and uniaxial compressive strength (UCS) without side pressure of ultrafine fly ash (UFA)-cement slurry with high volume. Low field-nuclear magnetic resonance (NMR) was used to characterize the pore structure characteristics. The relationship between UCS without lateral compression and pore characteristics, FA content and water-cement ratio of specimens was studied. The results show that the water-cement ratio has the greatest influence on the water separation rate and the concretion rate of the specimen, and the FA content has the greatest influence on the UCS of the specimen, and the changing trend was polynomial function. With the increase of FA content, the UCS without side compression of specimens decreases, and the elastic modulus decreases, but the ductility deformation is improved. Based on Feret classical equation and maturity formula, a model is proposed to predict the strength of FA-cement, where just three variables (i.e., the FA content, the water-cement ratio and the curing time) can characterize this complex model. The optimal ratio of FA-cement slurry is optimized according to the actual demand of mine. At present, this method has been widely applied in the mine and achieved good results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Rock Mechanics and Modeling · Grouting, Rheology, and Soil Mechanics · Coal Properties and Utilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Roof filling control technology and application to mine roadway damage in small pit goaf10.1016/j.ijmst.2018.10.001 ↗
2. Research on properties evolution of ultrafine fly ash and cement composite10.1016/j.conbuildmat.2020.119935 ↗
3. J.X. Zhang, Q. Zhang, Y.L. Huang, J.W. Liu, N. Zhou, D.F. Zan, Strata movement controlling effect of waste and fly ash backfillings in fully mechanized coal mining with backfilling fact, Mining Science and Technology(China), 21 (2011) 721–726.10.1016/j.mstc.2011.03.003 ↗
4. The effect of mechanically and chemically activated fly ashes on mortar properties10.1016/j.fuel.2006.03.031 ↗
5. A practice of ultra-fine tailings disposal as filling material in a gold mine10.1016/j.jenvman.2017.02.056 ↗
6. M.D. Khan, M.A. Abdy Sayyed, G.S. Yadav, S.H. Varma, The impact of fly ash and structural fiber on the mechanical properties of concrete, Materials Today: Proceedings, doi: 10.1016/j.matpr.2020.08.242.10.1016/j.matpr.2020.08.242 ↗
7. Mechanism study on green high-efficiency hydrothermal activation of fly ash and its application prospect
8. G.B. Ramesh Kumar, V.R. Mohamed Muzammil, Influence of addition of fly ash in concrete using sea water, Mater. Today: Proc. 22 (2020) 926–930.10.1016/j.matpr.2019.11.109 ↗
9. S.T. Liu, Z.Z Li, Y.Y. Li, W.D. Cao, Strength properties of Bayer red mud stabilized by lime-fly ash using orthogonal experiments, Constr. Build. Mater. 166(2018)554-563.10.1016/j.conbuildmat.2018.01.186 ↗
10. Orthogonal experiment and regression analusis on ultra-fine fly ash grouting material for treating coal mine goaf
11. Carbonation performance of concrete with fly ash as fine aggregate after stress damage and high temperature exposure10.1016/j.conbuildmat.2020.118125 ↗
12. Compressive stress-strain relationship for fly ash concrete under thermal steady state10.1016/j.cemconcomp.2019.103371 ↗
13. Thermal stress of high volume fly-ash concrete made with limestone aggregate10.1016/j.conbuildmat.2014.08.028 ↗
14. Development of composite cementitious material and optimization of slurry proportion based on fuzzy comprehensive evaluation
15. J.F. Rivera, N. Cristelo, A.F. Jimenez, R.M. GUTIERREZ, Synthesis of alkaline cements based on fly ash and metallurgic slag: Optimisation of the SiO2/Al2O3 and Na2O/SiO2 molar ratio using the response surface methodology, Constr. Build. Mater., 213(2019)424-433.10.1016/j.conbuildmat.2019.04.097 ↗
16. Effect of filling interval time on long-term mechanical strength of layered cemented tailing backfill10.1155/2016/9507852 ↗
17. Influence of structural factors on uniaxial compressive strength of cemented tailings backfill10.1016/j.conbuildmat.2018.04.126 ↗
18. Experiment on the mechanism of consolidation backfill body of extra-fine grain unclassified tailing and cementitious materials
19. Elastoplastic constitutive model experiment of full tailings-cemented filling body
20. Neural network and particle swarm optimization for predicting the unconfined compressive strength of cemented paste backfill10.1016/j.conbuildmat.2017.11.006 ↗
21. Y.L. Tan, Q.H. Gu, J.G. Ning, X.S. Liu, Z.C. Jia, D.M. Huang, Uniaxial Compression Behavior of Cement Mortar and Its Damage-Constitutive Model Based on Energy Theory, Materials. 12 (8) (2019) 1309.10.3390/ma12081309 ↗
22. Analysis of hydration and strength optimization of cement-fly ash-limestone ternary blended concrete10.1016/j.conbuildmat.2018.01.058 ↗
23. Early activation effect and mechanism of high-volume fly ash
24. Macroscopic performance and microcosmic working mechanism of ecological pure fly-ash cement
25. Early age strength increase of fly ash blended cement by a ternary hardening accelerating admixture10.1016/j.cemconres.2015.11.004 ↗
26. Early age shrinkage and heat of hydration of cement-fly ash-slag ternary blends10.1016/j.conbuildmat.2017.07.138 ↗
27. Effect of calcium silicate hydrate-polycarboxylate ether(C-S-H-PCE) nanocomposite as accelerating admixture on early strength enhancement of slag and calcined blended cements10.1016/j.cemconres.2019.01.007 ↗
28. T.S. Gowda, R.V. Ranganath, Utilization of coal fly ash and ultra fine additives in producing HPC: Influence on early strength, flexural parameters and microstructure, Materials Today: Proceedings, doi: 10.1016/j.matpr.2020.03.188.10.1016/j.matpr.2020.03.188 ↗
29. X.F. Luan, Z.H. Pan, D.D Wang, Study on the chemical activation of fly ash in fly ash blended portland cement system, Bull. Chin. Ceramic Soc. (China), 2010, 29(04):757-761+783.
30. Y.L. Zhao, J.P. Qiu, Z.Y. M.A, Z.B. Guo, H. Liu, Effect of superfine blast furnace slags on the binary cement containing high-volume fly ash, Powder Technol., 375(2020)539-548.10.1016/j.powtec.2020.07.094 ↗
31. Compressive strength and drying shrinkage of fly ash-bottom ash-silica fume multi-blended cement mortars10.1016/j.matdes.2011.11.043 ↗
32. Effect of sea water and MgSO4 solution on the mechanical properties and durability of self-compacting mortars with fly ash/silica fume10.1016/j.conbuildmat.2017.04.108 ↗
33. Research on the composite properties of ultrafine fly-ash high-strength concrete
34. Xie · 2006
35. Micro-mechanisms of dredged sludge solidified with reactive MgO-fly ash
36. M.H. Li, Z.Q. Yang, Y.T. Wang, Q. Gao, Experiment study of compressive strength and mechanical property of filling body for fly ash composite cementitious materials, J. China Univ. Mining Technol., 2015, 44(4):650-655+695.
37. P. Lutz, R. Jenisch, H, Klopefer, Lehrbuch der bauphysik, Teubner Stuttgart, 1985.
38. L. Liu, Z.Y. Fang, C.C. Qi, B. Z, L.J. Guo, K. Song, Experimental investigation on the relationship between pore characteristics and unconfined compressive strength cemented paste backfill, Constr. Build. Mater., 179(2018)254-264.10.1016/j.conbuildmat.2018.05.224 ↗
39. Petrophysical characterization of coals bu low-field nuclear magnetic resonance (NMR)10.1016/j.fuel.2009.11.005 ↗
40. Petrophysics and fluid properties characterizations of coalbed methane reservoir by using NMR relaxation time analysis
41. Advanced characterization of pores and fractures in coals by nuclear magnetic and X-ray computed tomography10.1007/s11430-010-0057-4 ↗
42. SP-24, Explanatory handbook on Indian standard code of practice for plain and reinforced concrete, New Delhi, India, 1983.
43. ACI Committee 209, Prediction of creep and shrinkage and temperature effects in concrete structures, American Concrete Institute, Farmington Hills, MI, 1990.
44. De Larrard · 1999
45. R.C. Tank, Carino, Rate constant functions for strength development of concrete, ACI Mater. J., 1991, 88(1):74-83.10.14359/2403 ↗
46. Creep model of fly ash concrete with time and load dependant mechanical properties