journal article·2021-04

Effects of nano-SiO2 coated multi-walled carbon nanotubes on mechanical properties of cement-based composites

Shaojie Li, Yuling Zhang, Shaosen Lin, Jun Yan, Shiguo Du

Publisher page

Abstract

Abstract Interfacial microstructure and interactions largely affect the mechanical properties of multi-walled carbon nanotubes (MWCNTs) reinforced cement-based composites. To improve the interfacial adhesion of MWCNTs-cement composites, a simple and effective method for preparation of SiO2/MWCNTs nano-composites were put forward using polyvinyl pyrrolidone (PVP) as a surfactant without any oxidation treatment on MWCNTs. The morphology, microstructure and chemical composition of SiO2/MWCNTs nano-composites were characterized by electron microscopy, Fourier transform infrared spectroscopy (FTIR), Raman spectrum, X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). It was found that amorphous nano-SiO2 uniformly and densely grown on the surface of MWCNTs, forming a rougher film. The chemical reactivity of the nano-SiO2 film was detected by immersion tests in Ca(OH)2 solution, where EDS and FTIR analysis confirmed the formation of hydrated calcium silicate gel (C-S-H). The effects of SiO2/MWCNTs on mechanical properties of cement mortars were investigated and compared with that of cement-based composites incorporating pristine MWCNTs. When 0.25 wt% and 0.50 wt% SiO2/MWCNTs were added, the flexural strengths of cement mortars were increased by 11.9% and 25.4%, respectively, which were more significant than the enhancement effects on compressive strengths (8.5% and 19.0%). The fracture surfaces of different samples were observed by SEM, and the Ca(OH)2 content was quantitatively determined by TG analysis, indicating that the chemical reaction of nano-SiO2 film with Ca(OH)2 generated from cement hydration process can effectively increase the C-S-H gel content at the interface between MWCNTs and cement matrix, which is the prime reason for the increase of mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Smart Materials for Construction · Concrete and Cement Materials Research · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Study on dispersion, mechanical and microstructure properties of cement paste incorporating graphene sheets10.1016/j.conbuildmat.2018.12.006 ↗
2. Behavior of multi-walled carbon nanotubes on the porosity and microstructure of cement-based materials10.1016/j.apsusc.2010.09.030 ↗
3. Mechanical properties and microstructure of multi-walled carbon nanotube-reinforced cement paste10.1016/j.conbuildmat.2014.11.049 ↗
4. Modeling the mechanical properties of cementitious materials containing CNTs10.1016/j.cemconcomp.2019.103347 ↗
5. Enhancing fresh properties and strength of concrete with a pre-dispersed carbon nanotube liquid admixture10.1016/j.conbuildmat.2020.118524 ↗
6. The effect of multi-walled carbon nanotubes on the mechanical behavior of basalt fibers metal laminates: an experimental study10.1016/j.ijadhadh.2019.102538 ↗
7. Carbon nanotubes (CNTs) in ultra-high performance concrete (UHPC): Dispersion, mechanical properties, and electromagnetic interference (EMI) shielding effectiveness (SE)10.1016/j.cemconres.2020.106017 ↗
8. Review of nanocarbon-engineered multifunctional cementitious composites10.1016/j.compositesa.2014.12.002 ↗
9. A review on the chemical, mechanical and microstructural characterization of carbon nanotubes-cement based composites10.1016/j.conbuildmat.2017.07.232 ↗
10. Fresh and mechanical properties, and strain sensing of nanomodified cement mortars: the effects of MWCNT aspect ratio, density and functionalization10.1016/j.cemconcomp.2017.05.004 ↗
11. Carbon nanotube (CNT) incorporated cementitious composites for functional construction materials: the state of the art10.1016/j.compstruct.2019.111244 ↗
12. Reinforcing effect of surface-modified multiwalled carbon nanotubes on flexural response of E-glass/epoxy isogrid-stiffened composite panels
13. Cement paste with well-dispersed multi-walled carbon nanotubes: mechanism and performance10.1016/j.conbuildmat.2020.120746 ↗
14. A critical review on research progress of graphene/cement based composites10.1016/j.compositesa.2017.07.019 ↗
15. Highly dispersed carbon nanotube reinforced cement based materials10.1016/j.cemconres.2010.02.015 ↗
16. Durability of multi-walled carbon nanotube reinforced concrete10.1016/j.conbuildmat.2017.12.221 ↗
17. Mechanical behavior and microstructure of cement composites incorporating surface-treated multi-walled carbon nanotubes10.1016/j.carbon.2004.12.017 ↗
18. Pressure-sensitive properties and microstructure of carbon nanotube reinforced cement composites10.1016/j.cemconcomp.2006.12.011 ↗
19. Dispersion and reinforcement efficiency of carbon nanotubes in cementitious composites10.1680/jmacr.17.00562 ↗
20. Effect of carbon fibers grafted with carbon nanotubes on mechanical properties of cement-based composites10.1016/j.conbuildmat.2018.06.049 ↗
21. Mechanism of cement paste reinforced by graphene oxide/carbon nanotubes composites with enhanced mechanical properties10.1039/C5RA18602A ↗
22. On the mechanical and shrinkage behavior of cement mortars reinforced with carbon nanotubes10.1016/j.conbuildmat.2018.02.146 ↗
23. Grafting SiO2 nanoparticles on polyvinyl alcohol fibers to enhance the interfacial bonding strength with cement10.1016/j.compositesb.2019.01.034 ↗
24. Effect of nano-CaCO3 and nano-SiO2 on improving the properties of carbon fibre-reinforced concrete and their pore-structure models10.1016/j.conbuildmat.2020.118297 ↗
25. Improving the interfacial strength of silicone resin composites by chemically grafting silica nanoparticles on carbon fiber10.1016/j.compscitech.2017.10.020 ↗
26. Role of nano-SiO2 in improving the microstructure and impermeability of concrete with different aggregate gradations10.1016/j.conbuildmat.2018.08.148 ↗
27. Reactive powder concrete reinforced with nano SiO2-coated TiO210.1016/j.conbuildmat.2017.05.065 ↗
28. Effect of diameter of multi-walled carbon nanotubes on mechanical properties and microstructure of the cement-based materials10.1016/j.conbuildmat.2020.120452 ↗
29. J. Qin, J. Qu, Y. Li, B. Wang, Z. Sun, H. Zhang, W. Zhang, Mechanical properties of highly dispersed carbon nanotubes reinforced cement-based materials, in: IOP Conf. Ser. Mater. Sci. Eng., 2019: p. 022025.10.1088/1757-899X/569/2/022025 ↗
30. Improved interfacial strength of SiO2 coated carbon fiber in cement matrix10.1016/j.cemconcomp.2018.04.007 ↗
31. Efficient surface modification of carbon nanotubes for fabricating high performance CNT based hybrid nanostructures10.1016/j.carbon.2016.10.027 ↗
32. Characterizing carbon nanotube samples with resonance Raman scattering10.1088/1367-2630/5/1/139 ↗
33. Effect of additions of multiwall carbon nanotubes (MWCNT, MWCNT-COOH and MWCNT-Thiazol) in mechanical compression properties of a cement-based material10.1016/j.mtla.2020.100739 ↗
34. SiOx surface stoichiometry by XPS: a comparison of various methods10.1002/sia.740220122 ↗
35. Kurdowski · 2014
36. FTIR study of the effect of temperature and nanosilica on the nano structure of C-S-H gel formed by hydrating tricalcium silicate10.1016/j.conbuildmat.2013.10.056 ↗
37. Properties of cement-based composites using nanoparticles: a comprehensive review10.1016/j.conbuildmat.2018.09.062 ↗
38. Aspect ratio effect of multi-walled carbon nanotubes and carbon fibers on high-performance cement mortar matrices10.1007/s41062-020-00290-2 ↗
39. Hybrid graphene oxide/carbon nanotubes reinforced cement paste: An investigation on hybrid ratio10.1016/j.conbuildmat.2020.119815 ↗
40. Dynamic mechanical properties of cementitious composites with carbon nanotubes
41. Multi-walled carbon nanotubes with different features reinforced cement pastes: a compressive and systematic approach using principal component analysis
42. Fire resistance and mechanical properties of carbon nanotubes - Clay bricks wastes (Homra) composites cement10.1016/j.conbuildmat.2015.08.074 ↗
43. Fracture toughness enhancement of cement paste with multi-walled carbon nanotubes10.1016/j.conbuildmat.2014.07.077 ↗
44. The application of thermal analysis, XRD and SEM to study the hydration behavior of tricalcium silicate in the presence of a polycarboxylate superplasticizer10.1016/j.tca.2015.05.020 ↗
45. Effect of polysaccharides on the hydration of cement paste at early ages10.1016/j.cemconres.2004.04.001 ↗
46. Mechanical properties and reinforcing mechanisms of cementitious composites with different types of multiwalled carbon nanotubes10.1016/j.compositesa.2017.10.001 ↗
47. Properties improvement of multiwall carbon nanotubes-reinforced cement-based composites10.1177/0021998319896835 ↗
48. Investigating the effect of carbon nanotube on early age hydration of cementitious composites with isothermal calorimetry and Fourier transform infrared spectroscopy10.1016/j.cemconcomp.2020.103513 ↗
49. Mechanical behavior and toughening mechanism of polycarboxylate superplasticizer modified graphene oxide reinforced cement composites10.1016/j.compositesb.2017.01.056 ↗
50. Mechanical properties, radiation mitigation and fire resistance of OPC-recycled glass powder composites containing nanoparticles10.1016/j.conbuildmat.2020.118703 ↗
51. Ceramic waste as an efficient material for enhancing the fire resistance and mechanical properties of hardened Portland cement pastes10.1016/j.conbuildmat.2017.08.040 ↗
52. Properties of cementitious materials in presence of nano carbon10.1016/j.matpr.2020.04.572 ↗
53. Aggregation size effect of graphene oxide on its reinforcing efficiency to cement-based materials10.1016/j.cemconcomp.2019.04.005 ↗