Bond behavior between BFRP bar and basalt fiber reinforced seawater sea-sand recycled aggregate concrete
Source abstract
Abstract
Abstract In order to meet the demand of construction waste treatment and using local materials, the use of recycled coarse aggregate (RCA), sea-sand and seawater is of great significance to coastal areas and sea-related engineering construction. Basalt fiber (BF) reinforced seawater sea-sand recycled aggregate concrete (BFSSRAC) with good workability was prepared in this paper. The mechanical properties of BFSSRAC and bond behavior between BFRP bar and BFSSRAC were investigated considering the effects of BF content and concrete strength through a series of tests and microstructure analysis. The results showed that the combination use of BF, seawater, sea-sand and RCA could reduce the adverse effects of RCA on the mechanical property of concrete. SEM analysis showed that the addition of BF could effectively improve the pore structure of concrete matrix, especially the interfacial transition zone (ITZ). The usage of RCA reduced the bond strength between BFRP bar and RAC, while the usage of seawater and sea-sand had little effect on the bond-slip constitutive relation. After adding BF, the ultimate bond strength and maximum slip of BFSSRAC were larger than those of concrete without fibers and increased with the increasing BF content. Based on the experimentally obtained τ-s curves, the bond-slip constitutive relation model between BFRP bar and BFSSRAC was proposed, and the model was verified by deviation analysis between calculated and measured values. The findings of this study can provide new and meaningful reference for the application of BFSSRAC structures reinforced with BFRP bars.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Use of sea-sand and seawater in concrete construction: Current status and future opportunities10.1016/j.conbuildmat.2017.08.130 ↗
2. Mechanical and durability properties of concrete made with dredged marine sand
3. Effect of partial replacement of sand with dry oyster shell on the long-term performance of concrete10.1016/j.conbuildmat.2009.10.032 ↗
4. Secondary aggregates and seawater employment for sustainable concrete dyke blocks production: Case study10.1016/j.conbuildmat.2016.03.097 ↗
5. Suitability of sea water for mixing structural concrete exposed to a marine environment10.1016/0958-9465(95)00015-5 ↗
6. Performance of seawater-mixed concrete in the tidal environment10.1016/j.cemconres.2003.09.020 ↗
7. Some considerations for applicability of seawater as mixing water in concrete10.1061/(ASCE)MT.1943-5533.0001006 ↗
8. Experimental evaluation of buildings damaged in recent earthquakes in Turkey10.1016/j.engfailanal.2004.02.007 ↗
9. Dredged marine sand as construction material10.1080/19648189.2012.676376 ↗
10. Durability of sea-sand containing concrete: Effects of chloride ion penetration10.1016/j.mstc.2010.07.003 ↗
11. Freezing and thawing resistance of concrete containing chloride
12. Changes in the phase assemblage of concrete exposed to sea water10.1016/j.cemconcomp.2013.09.015 ↗
13. Mechanical properties of concrete produced with recycled coarse aggregates – Influence of the use of superplasticizers10.1016/j.conbuildmat.2013.03.011 ↗
14. Properties of concrete prepared with low-grade recycled aggregates10.1016/j.wasman.2009.02.018 ↗
15. Properties of concrete made with recycled aggregate from partially hydrated old concrete10.1016/S0008-8846(02)01033-5 ↗
16. Behaviour of recycled aggregate concrete under drop weight impact load10.1016/j.conbuildmat.2010.06.055 ↗
17. Influence of the amount of recycled coarse aggregate in concrete design and durability properties10.1016/j.conbuildmat.2011.06.059 ↗
18. Effects of internal curing on the strength, drying shrinkage and freeze–thaw resistance of concrete containing recycled concrete aggregates10.1016/j.conbuildmat.2015.05.045 ↗
19. Influence of recycled concrete aggregates on strength properties of concrete10.1016/j.conbuildmat.2008.06.007 ↗
20. Failure mechanism of recycled aggregate concrete10.1016/j.conbuildmat.2007.03.032 ↗
21. Experimental study on the failure mechanism of recycled concrete10.1016/j.cemconres.2011.06.007 ↗
22. Properties of glass concrete reinforced with short basalt fibre10.1016/j.matdes.2012.05.062 ↗
23. Glass–basalt/epoxy hybrid composites for marine applications10.1016/j.matdes.2010.11.043 ↗
24. Characteristics of basalt fiber as a strengthening material for concrete structures10.1016/j.compositesb.2005.02.002 ↗
25. Environmental resistance and mechanical performance of basalt and glass fibers10.1016/j.msea.2010.04.021 ↗
26. Mechanical characterisation of basalt fibre reinforced plastic10.1016/j.compositesb.2011.01.030 ↗
27. Tensile behavior contrast of basalt and glass fibers after chemical treatment10.1016/j.matdes.2010.04.009 ↗
28. Improving the mechanical properties of recycled concrete aggregate using chopped basalt fibers and acid treatment10.1016/j.conbuildmat.2017.02.128 ↗
29. Material properties of basalt fiber reinforced concrete made with recycled earthquake waste10.1016/j.conbuildmat.2016.08.118 ↗
30. Axial compressive behavior of polyethylene terephthalate/carbon FRP- confined seawater sea-sand concrete in circular columns10.1016/j.conbuildmat.2019.117383 ↗
31. Crack development and calculation method for the flexural cracks in BFRP reinforced seawater sea-sand concrete (SWSSC) beams10.1016/j.conbuildmat.2020.119328 ↗
32. Bond behaviour between recycled aggregate concrete and glass fibre reinforced polymer bars10.1016/j.conbuildmat.2015.12.145 ↗
33. Study on bond performance between FRP bars and seawater coral aggregate concrete10.1016/j.conbuildmat.2018.04.015 ↗
34. Bond of FRP reinforcement in concrete - A challenge10.1023/A:1025642411103 ↗
35. Bond behavior of fiber reinforced polymer bars under direct pullout conditions10.1061/(ASCE)1090-0268(2004)8:2(173) ↗
36. Use of sand coating to improve bonding between GFRP bars and concrete10.1177/0021998311431994 ↗
37. Experimental study of bond behaviour between concrete and FRP bars using a pull-out test10.1016/j.compositesb.2009.07.003 ↗
38. Bond performance between fibre-reinforced polymer bars and concrete under pull-out tests10.1016/j.conbuildmat.2019.116803 ↗
39. Effects of structural fibers on bonding mechanism changes in interface between GFRP bar and concrete10.1016/j.compositesb.2012.09.039 ↗
40. Effect of fibers on the bonds between FRP reinforcing bars and high-strength concrete10.1016/j.compositesb.2007.11.005 ↗
41. Fibres for enhancing of the bond capacity between GFRP rebar and concrete10.1016/j.conbuildmat.2013.10.089 ↗
42. Bond durability of FRP bars embedded in fiber-reinforced concrete10.1061/(ASCE)CC.1943-5614.0000270 ↗
43. Experimental study on bond performance of GFRP bars in self-compacting steel fiber reinforced concrete10.1016/j.compstruct.2012.07.009 ↗
44. Bond strength and bond stress-slip analysis of FRP bar to concrete incorporating environmental durability10.1016/j.conbuildmat.2020.119860 ↗
45. Investigation of bond in concrete member with fibre reinforced polymer (FRP) bars10.1016/S0950-0618(98)00027-0 ↗
46. Bond behavior between BFRP bar and recycled aggregate concrete reinforced with basalt fiber10.1016/j.conbuildmat.2016.12.161 ↗
47. Bond-slip constitutive relation between BFRP bar and basalt fiber recycled-aggregate concrete10.1007/s12205-015-0350-z ↗
48. Bond durability of basalt fiber-reinforced polymer bars embedded in concrete under direct pullout conditions10.1061/(ASCE)CC.1943-5614.0000544 ↗
49. Bond durability of basalt-fiber-reinforced-polymer (BFRP) bars embedded in concrete in aggressive environments10.1016/j.compositesb.2016.09.039 ↗
50. Bond behavior between BFRP rebar and seawater sea sand concrete10.1155/2020/8850809 ↗
51. Basic mechanical properties of seawater sea-sand recycled concrete
52. Bond between FRP composites and concrete: Assessment of design procedures and analytical models10.1016/j.compositesb.2013.12.075 ↗