journal article·2021-07Open access

Microstructural investigation of slag-blended UHPC: The effects of slag content and chemical/thermal activation

Omar M. Abdulkareem, Amor Ben Fraj, Marwen Bouasker, Lahcen Khouchaf, Abdelhafid Khelidj

Abstract

Abstract This paper focuses on the microstructural investigation of ultra-high performance concrete (UHPC) mixtures featuring various replacement levels for blast furnace slag (BFS), in the aim of becoming more environmentally-friendly. Three levels of slag are applied (namely 30%, 50% and 80%) per unit volume of cement. The microstructural characteristics examined included X-ray diffraction (XRD) analysis, transmission electron microscopy (TEM), and mercury intrusion porosimetry (MIP). These characteristics are assessed along with the mechanical strengths at 3 and 90 days. Similarly, the effects of chemical and thermal activation methods on incorporating BFS into UHPC mixtures at high volumes were studied from a microstructural point of view, and a comparison is drawn between the non-activated and activated mixtures. The results of this investigation show that the beneficial physical impact of slag replacement lies at the 30% level, due to its filler property in stimulating hydration to quickly generate portlandite. For this reason, the portlandite and C-S-H peaks are quite similar to those in the reference mixture (i.e. 0% BFS) at 3 and 90 days, as demonstrated in the XRD analysis. Moreover, the pore size distribution could be refined, the microstructure densified (as indicated on the TEM images), and compressive strengths at both ages improved. In contrast, for slag replacement levels of 50% and 80%, the portlandite and C-S-H peaks are significantly lowered, as observed in the XRD analysis, thus causing a magnification of the capillary pores and a drop in compressive strength at 3 and 90 days. Chemical activation through a potassium hydroxide, with a dosage of 10.17 kg/m3, at the 80% BFS replacement level is able to accelerate hydration and portlandite consumption, as exhibited in the XRD analysis through the absence of portlandite peaks and limited quantities of C-S-H at 3 and 90 days. However, this step results in smaller pores and a higher compressive strength. As for the thermal activation, the portlandite in the blended mixtures with 50% and 80% BFS replacement decreases in quantity, as confirmed by XRD analysis, and the reaction is perfectly activated by means of the solubility acceleration of the alkalis; consequently, the pore structure is compacted, as revealed on the TEM image and the compressive strength rises considerably.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Nuclear materials and radiation effects

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Composition of reactive powder concretes10.1016/0008-8846(95)00144-2 ↗
2. Fehling · 2014
3. Effect of polycarboxylate and crushed quartz in UHPC: microstructural investigation10.1016/j.conbuildmat.2013.03.077 ↗
4. A review on ultra high performance concrete: Part II. Hydration, microstructure and properties10.1016/j.conbuildmat.2015.08.095 ↗
5. Microstructural investigations of ultra-high performance concrete obtained by pressure application within the first 24 hours of hardening
6. Optimal conditions for producing reactive powder concrete10.1680/macr.2010.62.10.701 ↗
7. Microstructural analysis of RPC (Reactive Powder Concrete)10.1016/0008-8846(95)00143-Z ↗
8. Preparation of ultra-high performance concrete with common technology and materials10.1016/j.cemconcomp.2011.11.005 ↗
9. A review on ultra high performance concrete: part I. raw materials and mixture design10.1016/j.conbuildmat.2015.10.088 ↗
10. A qualitative study of reactive powder concrete using X-ray diffraction technique10.9790/3021-02911216 ↗
11. Influence of amorphous silica on the hydration in ultra-high performance concrete10.1016/j.cemconres.2014.01.006 ↗
12. Reactive powder based concretes: mechanical properties, durability and hybrid use with OPC10.1016/j.cemconres.2008.03.013 ↗
13. P. Hájek, C. Fiala, Environmentally optimized floor slabs using UHPC-contribution to sustainable construction. Proceedings of the 2nd International Symposium on Ultra High Performance Concrete, Kassel, Germany, 2008, pp. 879–886.
14. Enhancing flowability and sustainability of ultra high performance concrete incorporating high replacement levels of industrial slags10.1016/j.conbuildmat.2016.06.134 ↗
15. Early-age hydration and mechanical properties of high volume slag and fly ash concrete at different curing temperatures10.1016/j.conbuildmat.2017.05.080 ↗
16. Effect of content and fineness of slag as high volume cement replacement on strength and durability of ultra-high performance mortar10.34118/jbms.v3i2.23 ↗
17. J.F. Lamond, J.H. Pielert, Significance of tests and properties of concrete and concrete-making materials, ASTM International, West Conshohocken, PA, ASTM Stock No.: STP169D, 2006.10.1520/STP169D-EB ↗
18. The effect of w/b and temperature on the hydration and strength of blastfurnace slag cements10.1016/j.conbuildmat.2015.11.001 ↗
19. An investigation on very high volume slag pastes subjected to elevated temperatures10.1016/j.conbuildmat.2014.10.019 ↗
20. Activation of blast furnace slag by a new method10.1016/j.cemconres.2009.05.012 ↗
21. Hydration process and pore structure of portland cement paste blended with blast furnace slag
22. Composition and microstructure of 20-year-old ordinary Portland cement–ground granulated blast-furnace slag blends containing 0 to 100% slag10.1016/j.cemconres.2010.02.012 ↗
23. Microstructure and durability of mortars modified with medium active blast furnace slag10.1016/j.conbuildmat.2010.06.077 ↗
24. M. Bertin, O.O. Metalssi, V.B. Bouny, M. Saillio, Changes in microstructure and pore structure of low-clinker cementitious materials during early stages of carbonation. Proceedings of the 2nd International Conference in Concrete Sustainability (ICCS 16), Madrid, Spain, 2016, pp. 1–12.
25. The properties of slag cement and its influence on the structure of the hardened cement paste10.1016/j.proeng.2016.07.202 ↗
26. Activation of Algerian slag in mortars10.1016/j.conbuildmat.2007.10.012 ↗
27. Influence of silica fume on properties of fresh and hardened ultra-high performance concrete based on alkali-activated slag10.1016/j.cemconcomp.2019.03.023 ↗
28. W. Chen, Hydration of slag cement: Theory, modeling, and application, University of Twente, The Netherlands, Doctoral Thesis, 2007.
29. Effect of activator type and content on properties of alkali-activated slag mortars10.1016/j.compositesb.2013.10.001 ↗
30. Shi · 2006
31. Alkali-activated slag cement concrete: a closer look at a sustainable alternative to portland cement
32. Physico-chemical and mechanical characteristics of pozzolanic cement pastes and mortars hydrated at different curing temperatures10.1016/j.conbuildmat.2011.06.026 ↗
33. Effects of curing conditions on properties of concrete using slag replacement10.1016/S0008-8846(00)00200-3 ↗
34. Mixture design and early age investigations of more sustainable UHPC10.1016/j.conbuildmat.2017.12.107 ↗
35. Improvement of the early-age reactivity of fly ash and blast furnace slag cementitious systems using limestone filler10.1617/s11527-010-9637-1 ↗
36. Effect of chemical and thermal activation on the microstructural and mechanical performance of more sustainable UHPC10.1016/j.conbuildmat.2018.02.214 ↗
37. En · 2016
38. Early age and mechanical properties of environmentally friendly ultra high performance concrete
39. Physico-chemical, morphological and thermal analysis for the combined pozzolanic activities of minerals additives10.1016/j.conbuildmat.2008.12.008 ↗
40. V. Kocaba, Development and evaluation of methods to follow microstructural development of cementitious systems including slags, École Polytechnique Fédérale of Lausanne, Switzerland, Doctoral Thesis, 2009.
41. Influence of activator type on hydration kinetics, hydrate assemblage and microstructural development of alkali activated blast-furnace slags10.1016/j.cemconres.2010.11.016 ↗
42. A transmission electron microscopy study of interfaces and matrix homogeneity in ultra-high-performance cement-based materials10.1023/A:1017938725748 ↗
43. Effect of particle-size distribution and specific surface area of different binder systems on packing density and flow characteristics of cement paste10.1016/j.cemconcomp.2017.01.005 ↗
44. The hydration and microstructure of ultra high-strength concrete with cement-silica fume-slag binder10.1016/j.cemconcomp.2015.04.013 ↗
45. Evolution of pore structure in blended systems10.1016/j.cemconres.2015.02.025 ↗
46. Microstructure of hardened complex binder pastes blended with slag
47. Ramezannianpour · 2014
48. Hydration kinetics, change of relative humidity, and autogenous shrinkage of ultra-high-strength concrete10.1016/S0008-8846(99)00022-8 ↗
49. Effect of pore size distribution on drying shrinkage of alkali-activated slag concrete10.1016/S0008-8846(00)00327-6 ↗
50. Water, environmental, and nano-structural network in a reactive powder concrete10.1016/0958-9465(95)00036-4 ↗
51. V. Matte, Durability of ultra high performance concrete: Role of cementitious matrix, ENS Cachan University of Sherbrooke, Canada, Doctoral Thesis, 1999.
52. Mechanical properties of reactive powder concrete containing mineral admixtures under different curing regimes10.1016/j.conbuildmat.2008.08.003 ↗
53. Siddique · 2008
54. Effects of thermal and mechanical activation methods on compressive strength of ordinary Portland cement–slag mortar10.1016/j.matdes.2010.08.038 ↗
55. O. Kayali, J.M. Khatib, M.S. Ahmed, The role of industrial by-products in creating sustainable concrete. International Seminar: Innovation & valorization in civil engineering & construction materials, No. 1O-304, Morocco, 2011.
56. Physico-chemical, mechanical, microstructure and durability characteristics of alkali activated Egyptian slag10.1016/j.conbuildmat.2014.07.026 ↗
57. Mechanical properties of reactive powder concrete containing high volumes of ground granulated blast furnace slag10.1016/j.cemconcomp.2010.07.005 ↗