Waste-Based porous materials as water reservoirs for the internal curing of Concrete. A review
Source abstract
Abstract
This review collates findings from more than 100 scientific publications regarding the performance of several waste-based porous materials (WASPORs) as water reservoirs for the internal curing of concrete. Results obtained by using recycled concrete aggregates, crushed ceramics, coal bottom ash, artificial waste-based aggregates, different powder materials and porous fibres were included. The influence of these WASPORs on the consistence, hydration, setting, microstructure, density, strength, modulus of elasticity, autogenous deformation, drying shrinkage and durability properties of concrete were analysed. General recommendations for suitable characterization of WASPOR and mix design are also given. The differences in water absorption capacity between the different porous materials studied have been used for explaining several of the observed phenomena. A moderate water absorption capacity together with a quick water desorption capacity were found to be among the key factors that define the internal curing efficiency of the proposed WASPORs.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Environmental impacts and decarbonization strategies in the cement and concrete industries10.1038/s43017-020-0093-3 ↗
2. Trends in global CO2 emissions
3. A review on effects of limestone powder on the properties of concrete10.1016/j.conbuildmat.2018.10.119 ↗
4. Combined influence of recycled concrete aggregates and high contents of fly ash on concrete properties10.1016/j.conbuildmat.2017.09.128 ↗
5. A review on fly ash characteristics – Towards promoting high volume utilization in developing sustainable concrete10.1016/j.jclepro.2017.01.114 ↗
6. Reviewing the behaviour of high volume fly ash based self compacting concrete10.1016/j.jobe.2019.100882 ↗
7. Studies on the corrosion resistance of reinforced steel in concrete with ground granulated blast-furnace slag-An overview10.1016/j.jhazmat.2006.07.022 ↗
8. Utilization and efficiency of ground granulated blast furnace slag on concrete properties - A review10.1016/j.conbuildmat.2015.12.153 ↗
9. Silica fume and waste glass in cement concrete production: a review10.1016/j.jobe.2019.100888 ↗
10. AENOR, UNE-EN 197-1: Composition, specifications and conformity criteria for common cements., (2011).
11. Effect of oyster shell substituted for fine aggregate on concrete characteristics: Part I. Fundamental properties10.1016/j.cemconres.2005.03.016 ↗
12. A.P. Adewuyi, T. Adegoke, Exploratory Study of Periwinkle Shells as Coarse Aggregates in Concrete Works, 3 (2008) 1–5.
13. Burnt clay brick aggregate for internal curing of concrete under adverse curing conditions10.1007/s12205-019-0834-3 ↗
14. Shifting sand: why we’re running out of aggregate10.1080/20450249.2019.1656448 ↗
15. Handbook of low carbon concrete
16. Recycled concrete with coarse recycled aggregate. An overview and analysis10.3989/mc.2018.13317 ↗
17. Sustainable use of industrial-waste as partial replacement of fine aggregate for preparation of concrete – A review10.1016/j.ijsbe.2016.04.006 ↗
18. Alternative fine aggregates in production of sustainable concrete- A review10.1016/j.jclepro.2020.122089 ↗
19. Use of granular coal combustion products as aggregates in structural concrete: effects on properties and recommendations regarding mix design10.1016/j.conbuildmat.2020.121690 ↗
20. ASTM, ASTM C1761: Lightweight Aggregate for lnternal Curing of Concrete, (2015). doi:10.1520/C1761.
21. Experimental studies on shrinkage of high-performance concrete10.1016/S0008-8846(98)00068-4 ↗
22. Autogenous deformations of cement pastes: Part II. W/C effects, micro-macro correlations, and threshold values10.1016/j.cemconres.2004.10.020 ↗
23. Autogenous relative humidity change and autogenous shrinkage of high-performance cement pastes10.1016/j.cemconres.2004.06.028 ↗
24. Internal curing of high performance concrete using lightweight and recycled concrete aggregates
25. Optimum proportion of masonry chip aggregate for internally cured concrete10.1007/s40069-017-0196-5 ↗
26. Evaluation of internal curing effects on concrete
27. A review on the use of LWA as an internal curing agent of high performance cement-based materials10.1016/j.conbuildmat.2019.05.126 ↗
28. Effect of internal curing on behavior of high performance concrete: an overview
29. Addition of pre-wetted lightweight aggregate and steel/polypropylene fibers in high-performance concrete to mitigate autogenous shrinkage10.1002/suco.201900280 ↗
30. Comprehensive approach to evaluation of mechanical properties of waste aggregate concrete reinforced by steel fiber10.1002/suco.201800271 ↗
31. High performance of treated and washed MSWI bottom ash granulates as natural aggregate replacement within earth-moist concrete10.1016/j.wasman.2016.01.010 ↗
32. Hardened properties of layered 3D printed concrete with recycled sand10.1016/j.cemconcomp.2020.103724 ↗
33. A novel additive mortar leveraging internal curing for enhancing interlayer bonding of cementitious composite for 3D printing10.1016/j.conbuildmat.2020.118305 ↗
34. Internally cured high performance concrete with magnesium based expansive agent using coal bottom ash particles as water reservoirs10.1016/j.conbuildmat.2020.118977 ↗
35. Mechanical properties and autogenous deformation behavior of early-age concrete containing pre-wetted ceramsite and CaO-based expansive agent10.1016/j.conbuildmat.2020.120992 ↗
36. How do recycled concrete aggregates modify the shrinkage and self-healing properties?10.1016/j.cemconcomp.2017.11.003 ↗
37. Effect of internal activation using porous ceramic aggregate on hardness and pore structure of fly ash cement paste10.4028/www.scientific.net/KEM.711.95 ↗
38. D. Bentz, Capitalizing on self-desiccation for autogenous distribution of chemical admixtures in concrete, Porc. 4th Int. Semin. Self-Desiccation Its Importance Concr. (2005) 189–196. http://ciks.cbt.nist.gov/~garbocz/4th_lund/.
39. Enhancing mechanical and durability properties of recycled aggregate concrete10.1016/j.conbuildmat.2017.09.137 ↗
40. Assessing benefits of pre-soaked recycled concrete aggregate on variably cured concrete10.1016/j.conbuildmat.2017.02.140 ↗
41. Recycling of rubble from building demolition for low-shrinkage concretes10.1016/j.wasman.2009.11.026 ↗
42. Influence of initial saturation degree of recycled aggregates on fresh cement paste characteristics: consequences on recycled concrete properties10.1080/19648189.2016.1245630 ↗
43. Effects of internal curing on the strength, drying shrinkage and freeze-thaw resistance of concrete containing recycled concrete aggregates10.1016/j.conbuildmat.2015.05.045 ↗
44. Assessment of the freeze-thaw resistance of concrete incorporating carbonated coarse recycled concrete aggregates10.2109/jcersj2.17111 ↗
45. B.R. Henkensiefken, J. Castro, H. Kim, D. Bentz, J. Weiss, Internal curing improves concrete performance throughout its life, (2009).
46. Internal curing of recycled aggregates concrete10.1016/j.jclepro.2020.122911 ↗
47. Durable high early strength concrete via internal curing approach using saturated lightweight and recycled concrete aggregates10.1177/0361198120920882 ↗
48. Influence of recycled coarse aggregates characteristics on mechanical properties of structural concrete10.1080/19648189.2016.1246694 ↗
49. Bond behavior of recycled concrete: analysis and prediction of bond stress-slip curve10.1061/(ASCE)MT.1943-5533.0002000 ↗
50. Time-dependent behaviour of structural concrete made with recycled coarse aggregates. Creep and shrinkage10.1016/j.conbuildmat.2016.06.050 ↗
51. Workability and mechanical properties of mortar containing recycled sand from aerated concrete blocks and sintered clay bricks10.1016/j.resconrec.2020.104728 ↗
52. Properties and internal curing of concrete containing recycled autoclaved aerated lightweight concrete as aggregate10.1155/2017/2394641 ↗
53. Effects of porous shale waste brick lightweight aggregate on mechanical properties and autogenous deformation of early-age concrete
54. S. Seiki, T. Nukushina, S. Meddah, R. Sato, Effectiveness of porous ceramic waste as an internal curing material for fly ash concrete, (2010).
55. T. Phuong Bui, Y. Muragishi, Yusuke, Ogawa, K. Kawai, R. Sato, Effects of Porous Ceramic Waste Aggregate as an Internal Curing Agent on Steam-Cured High Strength Fly Ash Concrete, in: Conf. Sustain. Struct. Concr., La Plata, 2015: pp. 66–76. doi:10.1017/CBO9781107415324.004.
56. Internal curing of Class-F fly-ash concrete using high-volume roof-tile waste aggregate10.1617/s11527-017-1073-z ↗
57. Effect of curing methods on autogenous shrinkage and self-induced stress of high-performance concrete
58. Use of porous ceramic waste aggregates for internal curing of high-performance concrete10.1016/j.cemconres.2009.01.007 ↗
59. Effect of Internal Curing on Behavior of High Performance Concrete, University of Technology
60. Y. Ogawa, P.T. Bui, K. Kawai, R. Sato, Effects of porous ceramic roof tile waste aggregate on strength development and carbonation resistance of steam-cured fly ash concrete, Constr. Build. Mater. 236 (2020). doi:10.1016/j.conbuildmat.2019.117462.10.1016/j.conbuildmat.2019.117462 ↗
61. Microscopic investigation on concrete cured internally by using porous ceramic roof-tile waste aggregate10.1051/matecconf/201819501004 ↗
62. Effects of pore structure and water absorption on internal curing efficiency of porous aggregates10.1016/j.conbuildmat.2017.12.170 ↗
63. E.S. Aldana Barcinilla, N. Torres Castellanos, Uso de material cerámico como material para curado interno en mezclas de concreto, 2014.
64. Improvement of properties of portland blast furnace cement type B concrete by internal curing using ceramic roof material waste10.1061/(ASCE)MT.1943-5533.0000232 ↗
65. The assessment of ceramic and mixed recycled aggregates for high strength and low shrinkage concretes10.1617/s11527-018-1244-6 ↗
66. Engineering properties of cement mortar with pond ash in South Korea as construction materials: From waste to concrete
67. Flow, water absorption, and mechanical characteristics of normal- and high-strength mortar incorporating fine bottom ash aggregates10.1016/j.conbuildmat.2011.06.019 ↗
68. Autogenous shrinkage reduction with untreated coal bottom ash for high-strength concrete
69. Internal-curing efficiency of cold-bonded coal bottom ash aggregate for high-strength mortar10.1016/j.conbuildmat.2016.08.125 ↗
70. Resistance of coal bottom ash mortar against the coupled deterioration of carbonation and chloride penetration10.1016/j.matdes.2015.12.074 ↗
71. Effect of cement types, mineral admixtures, and bottom ash on the curing sensitivity of concrete10.1007/s12613-013-0699-2 ↗
72. Internal curing of high performance mortars with bottom ash10.1016/j.cemconcomp.2016.04.009 ↗
73. Internal curing with lightweight aggregate produced from biomass-derived waste10.1016/j.cemconres.2014.01.025 ↗
74. Internal curing of high-strength concretes using artificial aggregates as water reservoirs
75. Integrated shrinkage, relative humidity, strength development, and cracking potential of internally cured concrete exposed to different drying conditions10.1080/07373937.2015.1072549 ↗
76. Internal curing of mortar with low water to cementitious materials ratio using a normal weight porous aggregate10.1016/j.conbuildmat.2015.08.025 ↗
77. The effect of expansive agent and cooling rate in the performance of expanded glass lightweight aggregate as an internal curing agent10.1016/j.conbuildmat.2020.121505 ↗
78. Waste Valorisation using biochar for cement replacement and internal curing in ultra-high performance concrete10.1016/j.jclepro.2019.117876 ↗
79. Internal curing of high performance concrete using cenospheres10.1016/j.cemconres.2017.02.023 ↗
80. Using drinking water treatment waste as low-cost internal curing agent for concrete
81. Effects of red mud on properties of self-compacting mortar10.1016/j.jclepro.2016.07.052 ↗
82. Lechugilla natural fiber as internal curing agent in self compacting concrete (SCC): Mechanical properties, shrinkage and durability10.1016/j.cemconcomp.2020.103686 ↗
83. Self-shrinkage behaviors of waste paper fiber reinforced cement paste considering its self-curing effect at early-ages10.1155/2016/8690967 ↗
84. Effect of recycled coarse aggregate on damage of recycled concrete10.1617/s11527-011-9736-7 ↗
85. A.P. Vieira, R.D. Toledo Filho, L.M. Tavares, G.C. Cordeiro, Effect of particle size, porous structure and content of rice husk ash on the hydration process and compressive strength evolution of concrete, Constr. Build. Mater. 236 (2020) 1–9. doi:10.1016/j.conbuildmat.2019.117553.10.1016/j.conbuildmat.2019.117553 ↗
86. 1097–6 Ensayos para determinar las propiedades mecánicas y físicas de los áridos
87. N.Y.S.D. of T.M. Bureau, NY 703-19 E Moisture content of lightweight fine aggregate, (2008) 1–4.
88. Modeling of autogenous volume deformation process of RCC mixed with MgO based on concrete expansion experiment10.1016/j.conbuildmat.2019.03.226 ↗
89. A method to determine water retainability of porous fine aggregate for design and quality control of fresh concrete10.1016/j.conbuildmat.2006.01.009 ↗
90. Internal curing: a 2010 state of the art review
91. ASTM, ASTM C1498 - Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials, (2016) 4.
92. Internal curing with crushed returned concrete aggregates
93. Effect of water entrainment by pre-soaked biochar particles on strength and permeability of cement mortar10.1016/j.conbuildmat.2017.10.095 ↗
94. Ultra-high strength concrete made with recycled aggregate from sanitary ceramic wastes – The method of production and the interfacial transition zone10.1016/j.conbuildmat.2016.06.112 ↗
95. Influence of ceramic waste as fine aggregate in concrete: Pozzolanic, XRD, FT-IR, and NMR investigations10.1061/(ASCE)MT.1943-5533.0002438 ↗
96. Effects of recycled concrete aggregates on the compressive and shear strength of high-strength self-consolidating concrete10.1061/(ASCE)MT.1943-5533.0000397 ↗
97. Protected paste volume in concrete: extension to internal curing using saturated lightweight fine aggregate10.1016/S0008-8846(99)00178-7 ↗
98. Mixture proportioning for internal curing
99. Influence of lightweight aggregate on the microstructure and durability of mortar10.1016/j.cemconres.2004.07.011 ↗
100. Influence of superabsorbent polymers on hydration of cement pastes with low water-to-binder ratio: a calorimetry study10.1007/s10973-013-3359-x ↗