Laboratory study on the suitability of nano-silica as a modifier for asphalt binders
Source abstract
Abstract
Abstract This paper reports the laboratory investigations carried out to assess the effect of nanosilica (NS) on the physical, morphological and rheological properties of asphalt binder. Two base binders (VG 10 and VG 30) are modified using two dosages of laboratory prepared NS (2% and 4%) by weight of the base asphalt binder. Rheological studies (10–70°C) include high temperature performance grading (PG), frequency sweep, multiple stress creep and recovery (MSCR) and linear amplitude sweep (LAS) tests. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) studies are also done to understand the structural modification process. It is found that NS induces amorphous nature to the base asphalt binder, as observed from XRD. SEM images show inclusions of NS as a layered interlocking network within the base asphalt binder. The true failure temperature, in high temperature PG grading, increased with the increase in percentage of NS. |G*|/sinδ master curve indicates improvement in rutting characteristics with increase in dosage of NS. The extent of improvement is found to be binder dependent. Since the stiffness of the base asphalt binder increases, |G*|·sinδ master curve drawn at 20°C shows loss in fatigue resistance by inclusions of NS. In MSCR test, the rutting resistance of NS modified asphalt binder is found to be higher than the base binder. The addition of 4% NS in VG10 increases the rutting resistance by approximately 6 times, whereas it is approximately 2 times for VG30. In VG10 the stress sensitivity reduces by 48% and 74%, respectively, by addition of 2% and 4% NS. The results from LAS test are not conclusive. Statistical analysis indicates that NS has no significant effect on the fatigue life of base asphalt binders, irrespective of test temperature. In general, it is concluded that NS modification is more beneficial for locations with high pavement temperatures and heavy vehicular loading conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (88)
Show source-provided references
1. M. Ameri, M. Vamegh, H. Rooholamini, F. Haddadi, Investigating Effects of Nano/SBR Polymer on Rutting Performance of Binder and Asphalt Mixture, 2018 (2018).10.1155/2018/5891963 ↗
2. Performance analysis of nano modified bitumen and hot mix asphalt10.1016/j.conbuildmat.2018.04.014 ↗
3. Effects of mixing sequence on mechanical properties of graphene oxide and warm mix additive composite modified asphalt binder10.1016/j.conbuildmat.2019.05.073 ↗
4. Production of modified bitumen from used engine oil, coal tar and waste tyre for construction applications10.1016/j.sajce.2020.05.005 ↗
5. Effect of inappropriate binder grade selection on initiation of asphalt pavement cracking10.3390/su12156099 ↗
6. A study on creep and recovery behavior of asphalt binders10.1016/j.conbuildmat.2015.08.078 ↗
7. Material selections in asphalt pavement for wet-freeze climate zones: A review10.1016/j.conbuildmat.2018.11.276 ↗
8. Physical and rheological properties of modified sulfur asphalt binder10.1016/j.ijprt.2018.07.005 ↗
9. Methodology to characterise non-standard asphalt materials using DMA testing: application to natural asphalt mixtures10.1080/10298436.2014.893328 ↗
10. AASHTO T350, Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR), 2019. https://standards.globalspec.com/std/13399766/T 350.
11. AASHTO-TP 101, Estimating Damage Tolerance of Asphalt Binders using Linear Amplitude Sweep, 2014.
12. Relating asphalt binders response to LAS and LAOS tests at intermediate temperatures10.1007/s11043-020-09462-0 ↗
13. Nonrecoverable behavior of polymer modified and reclaimed asphalt pavement modified binder under different multiple stress creep recovery tests10.1177/0361198118782029 ↗
14. Fatigue performance characterization and prediction of asphalt binders using the linear amplitude sweep based viscoelastic continuum damage approach10.1016/j.ijfatigue.2018.09.028 ↗
15. Polymer modified asphalt binders10.1016/j.conbuildmat.2005.07.007 ↗
16. Mahalakshmi · A Review on Modification of Bitumen for Flexible · 2018 · 6 · 2594
17. Waste Cooking Oil as Bio Asphalt Binder: A Critical Review10.1088/1757-899X/712/1/012040 ↗
18. Bitumen and Bitumen Modification: A Review on Latest Advances10.3390/app9040742 ↗
19. A review of using waste and virgin polymer in pavement10.1016/j.conbuildmat.2012.01.009 ↗
20. Polymer modification of bitumen: Advances and challenges10.1016/j.eurpolymj.2014.02.005 ↗
21. Nanomaterials applied in asphalt modification: A review10.1016/j.jmst.2013.04.008 ↗
22. J. Crucho, L. Picado-Santos, J. Neves, S. Capitão, A Review of Nanomaterials’ Effect on Mechanical Performance and Aging of Asphalt Mixtures, Appl. Sci. MDPI. 18 (2019). https://doi.org/https://doi.org/10.3390/app9183657.10.3390/app9183657 ↗
23. M. Sukhija, N. Saboo, Influence of nanoclay in viscosity graded asphalt binder at different test temperatures, in: Adv. Mater. Pavement Perform. Predict. II, CRC Press, 2020: pp. 101–104. https://doi.org/10.1201/9781003027362-25.10.1201/9781003027362-25 ↗
24. Evaluation of moisture susceptibility of nanoclay-modified asphalt binders through the surface science approach10.1061/(ASCE)MT.1943-5533.0001228 ↗
25. An overview of the use of nanoclay modified bitumen in asphalt mixtures for enhanced flexible pavement performances10.1080/14680629.2017.1408482 ↗
26. Nanoclay-modified asphalt materials: Preparation and characterization10.1016/j.conbuildmat.2010.06.070 ↗
27. Nanotechnology and its impact on construction: Bridging the gap between researchers and industry professionals10.1061/(ASCE)CO.1943-7862.0000467 ↗
28. P.K. Ashish, D. Singh, S. Bohm, Investigation on influence of nanoclay addition on rheological performance of asphalt binder, 0629 (2017). https://doi.org/10.1080/14680629.2016.1201522.10.1080/14680629.2016.1201522 ↗
29. Effects of nanoclay and nanocomposites on bitumen rheological properties10.1016/j.conbuildmat.2016.08.127 ↗
30. Characterization of the rate of change of rheological properties of nano-modified asphalt10.1016/j.conbuildmat.2015.08.069 ↗
31. Effect of montmorillonite nanoclay and sulphur-modified blends on the properties of bituminous mixes10.1007/s41062-021-00484-2 ↗
32. Review on nanomaterials: Synthesis and applications10.1016/j.matpr.2019.07.371 ↗
33. A review of advances of nanotechnology in asphalt mixtures10.1016/j.sbspro.2013.08.144 ↗
34. Effect of nanoclay on physical and rheological properties of waste cooking oil-modified asphalt binder10.1061/(ASCE)MT.1943-5533.0003598 ↗
35. The addition effects of macro and nano clay on the performance of asphalt binder10.1016/j.ejpe.2012.11.008 ↗
36. Evaluation of nano-titanium dioxide additive on asphalt binder aging properties10.3141/2207-02 ↗
37. Rheological evaluation of asphalt binder modified with nanoparticles of titanium dioxide10.1007/s40999-020-00525-4 ↗
38. Dispersions of nanosilica in biocompatible copolymers10.1016/j.polymdegradstab.2009.12.007 ↗
39. Performance evaluation of nanosilica-modified asphalt binder10.1007/s41062-019-0249-5 ↗
40. Polymer nanocomposites for structural applications: Recent trends and new perspectives10.1080/15376494.2015.1068406 ↗
41. Development of empirical model for predicting G∗/Sinδ and viscosity value for nanoclay and Carbon Nano Tube modified asphalt binder10.1016/j.conbuildmat.2018.01.021 ↗
42. A. Diab, Z. You, Moisture susceptibility of Nano-sized Hydrated Lime-modified foamed Warm Mix Asphalt mixes, Asph. Pavements – Proc. Int. Conf. Asph. Pavements, ISAP 2014. 2 (2014) 1735–1745. https://doi.org/10.1201/b17219-210.10.1201/b17219-210 ↗
43. Laboratory evaluation of the composition of nano-clay, nano-lime and SBS modifiers on rutting resistance of asphalt binder10.1016/j.conbuildmat.2019.117592 ↗
44. The effect of different nanomaterials on the long-term aging properties of bitumen10.1080/10916466.2014.986279 ↗
45. Research on the Properties of Low Temperature and Anti-UV of Asphalt with Nano-ZnO/Nano-TiO2/Copolymer SBS Composite Modified in High-Altitude Areas10.1155/2020/9078731 ↗
46. Influence of surface modification on physical and ultraviolet aging resistance of bitumen containing inorganic nanoparticles10.1016/j.conbuildmat.2015.08.138 ↗
47. Evaluation of rutting, fatigue and moisture damage performance of nanoclay modified asphalt binder10.1016/j.conbuildmat.2016.03.057 ↗
48. Evaluating the Suitability of Nanoclay-Modified Asphalt Binders from 10°C to 70°C10.1061/(ASCE)MT.1943-5533.0003386 ↗
49. Improving aging resistance and fatigue performance of asphalt binders using inorganic nanoparticles10.1016/j.conbuildmat.2018.03.107 ↗
50. Physiochemical, rheological, and oxidative aging characteristics of asphalt binder in the presence of mesoporous silica nanoparticles10.1061/(ASCE)MT.1943-5533.0001423 ↗
51. Experimental investigation of the effect of asphalt binder modified with nanosilica on the rutting, fatigue and performance grade10.1080/10916466.2018.1476534 ↗
52. Rheological properties and chemical bonding of asphalt modified with nanosilica10.1061/(ASCE)MT.1943-5533.0000690 ↗
53. Rheological investigation of asphalt binder modified with nanosilica10.1007/s42947-020-0327-2 ↗
54. Laboratory evaluation of nano-silica modification on rutting resistance of asphalt Binder10.1016/j.conbuildmat.2019.07.295 ↗
55. Effect of nanosilica morphology on modification of asphalt binder10.1080/14680629.2019.1602072 ↗
56. Effect of short-term aging on creep and recovery response of asphalt binders10.1061/JPEODX.0000018 ↗
57. Use of the multiple stress creep recovery (MSCR) test to characterize the rutting potential of asphalt binders: A literature review10.1016/j.conbuildmat.2020.121320 ↗
58. Multiple stress creep and recovery of nanosilica modified asphalt binder10.1051/matecconf/201710309005 ↗
59. Examination of hot mix asphalt and binder performance modified with nano silica10.1016/j.conbuildmat.2017.09.069 ↗
60. Effect of nanosilica particles on polypropylene polymer modified asphalt mixture performance
61. Optimum content of nano-silica to ensure proper performance of an asphalt binder10.1080/14680629.2017.1385510 ↗
62. Predicted performance of hot mix asphalt modified with nano-montmorillonite and nano-silicon dioxide based on Egyptian conditions10.1080/10298436.2018.1502437 ↗
63. Evaluating fatigue-damage of asphalt binder and mastic modified with nano-silica and synthesized polyurethane using VECD method10.1061/(ASCE)MT.1943-5533.0003280 ↗
64. IS: 73, Paving bitumen – specification. New Delhi, India, Bur. Indian Stand. (2013) 1–4.
65. B. of I. Standards, IS 1203: 1978: Methods for Testing Tar and Bituminous Materials, Penetration test, New Delhi, 1978.
66. B. of I. Standards, IS 1205: 1978: Methods for Testing Tar and Bituminous Materials, Softening Point Test, New Delhi, 1978.
67. B. of I. Standards, IS 1206: 1978: Methods for Testing Tar and Bituminous Materials, Viscosity Test, New Delhi, 1978.
68. Influence of the sol-gel acidic synthesis conditions on the porous texture and acidity of SiO2-Al2O3 catalysts with a low Al proportion10.1021/la990839w ↗
69. Hydrothermal synthesis of CeO 2 nanocrystals: Ostwald ripening or oriented attachment?10.1021/cg300421x ↗
70. Redox reaction induced Ostwald ripening for size- and shape-focusing of palladium nanocrystals10.1039/C5SC01787D ↗
71. P. Kriz, D. Grant, N. Boussad, D. Gausson, F. Cointe, C. Toulemonde, R. Shirts, Assessment of performance specification tests for rheologically simple bitumens, (2017). https://doi.org/10.14311/ee.2016.269.10.14311/EE.2016.269 ↗
72. Identifying fatigue failure in asphalt binder time sweep tests10.1016/j.conbuildmat.2016.06.020 ↗
73. M.J. Farrar, R.W. Grimes, C. Sui, J.P. Planche, T.F.-H. Turner, Thin film oxidative aging and low temperature performance grading using small plate dynamic shear rheometry: an alternative to standard RTFO, PAV, and BBR., (2012).
74. Asphalt Binders Characterization and Modeling X-Ray Diffraction, ME Thesis
75. Analysis of Different Test Methods for Quantifying Rutting Susceptibility of Asphalt Binders10.1061/(ASCE)MT.1943-5533.0001553 ↗
76. The relationship of the mscr test to rutting10.1080/14680629.2009.9690236 ↗
77. Use of the MSCR test to characterize the asphalt binder properties relative to HMA rutting performance – A laboratory study10.1016/j.conbuildmat.2015.06.044 ↗
78. Effect of warm mix additives on creep and recovery response of conventional and polymer modified asphalt binders10.1016/j.conbuildmat.2017.02.019 ↗
79. Development of High-Temperature Ranking Parameter for Asphalt Binders Using Arrhenius Model10.1061/(ASCE)MT.1943-5533.0002965 ↗
80. Effectiveness of Linear Amplitude Sweep (LAS) asphalt binder test in predicting asphalt mixtures fatigue performance10.1016/j.conbuildmat.2018.03.146 ↗
81. Fatigue resistance of asphalt binders and the correlation with asphalt mixture behaviour10.1080/14680629.2019.1633741 ↗
82. Asphalt Binder Linear Amplitude Sweep Test: Contribution Related to the α-Value Estimation10.1061/(ASCE)MT.1943-5533.0003569 ↗
83. Unified failure criterion for asphalt binder under cyclic fatigue loading10.1080/14680629.2015.1077010 ↗
84. C.M. Johnson Estimating Asphalt Binder Fatigue Resistance Using an Accelerated Test Method- PhD Thesis 2010 Univ WISCONSIN – MADISON.
85. New Damage Parameter for Fatigue Analysis of Asphalt Binders in Linear Amplitude Sweep Test10.1061/(ASCE)MT.1943-5533.0003225 ↗
86. Effect of Analysis Procedures in Linear Amplitude Sweep Test on the Fatigue Resistance of Nanoclay Modified Asphalt Binders10.1061/(ASCE)MT.1943-5533.0003507 ↗
87. Ranking the rheological response of SBS- and EVA-modified bitumen using MSCR and LAS tests10.1061/(ASCE)MT.1943-5533.0002367 ↗
88. AASHTO M320, AASHTO M 320 : Standard Specification for Performance-Graded Asphalt Binder, (2017).