journal article·2021-12

Development and characterization of lightweight aggregate recycled from construction and demolition waste mixed with other industrial by-products

Hung Phong Nguyen, Anette Mueller, Van Tuan Nguyen, Cong Thang Nguyen

Publisher page

Abstract

Abstract The amount of construction and demolition waste and industrial by-products are increasingly high in Vietnam recently. The recycling of these wastes as new construction materials is an effective solution for sustainable development. This paper presents a method for the recycling of construction and demolition waste and other industrial by-products, such as fly ash and slag in Vietnam to produce lightweight aggregate . Experimental results show that masonry wastes including brick and mortar as well as fly ash are suitable materials for producing lightweight aggregates with a granule density of less than 1000 kg/m3 with the optimum sintering temperatures and the residence time in the range from 1220 °C to 1250 °C and, 6 to 9 min, respectively. These recycled lightweight aggregates can be used as valuable substitutes for natural aggregates to make lightweight concrete for new structures and therefore contribute to the construction industry's sustainability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycled Aggregate Concrete Performance · Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Reducing building waste at construction sites in Hong Kong10.1080/0144619042000202816 ↗
2. National Environmental Report, Waste Management Topic, Vietnam, 2017, p. 45&55.
3. An experimental study of reusing coal ash for base course of road pavement in Viet Nam
4. V.H. Le, V.H. Nguyen, V.L. Vu, Properties of cement and concrete using Portland cement blended and Ground Granulated Blast Furnace Slag as mineral admixture, in: Int. Conf. on Buiding Materials “Science and Technology of Building Materials for Sustainable Development”, 2019, 31 Oct.-2 Nov., Hanoi, Vietnam.
5. A. Müeller, Baustoffrecycling: Entstehung – Aufbereitung – Verwertung, Springer Vieweg, 2018.10.1007/978-3-658-22988-7 ↗
6. Compressive and indirect tensile strengths of cement-treated mix granulates with recycled masonry and concrete aggregates10.1061/(ASCE)MT.1943-5533.0000401 ↗
7. New mixture proportioning method for concrete made with coarse recycled concrete aggregate10.1061/(ASCE)0899-1561(2009)21:10(601) ↗
8. Effect of the particle size range of construction and demolition waste on the fresh and hardened-state properties of fly ash-based geopolymer mortars with total replacement of sand10.1016/j.psep.2019.06.026 ↗
9. Recycling of demolished masonry rubble as coarse aggregate in concrete: review10.1061/(ASCE)0899-1561(2004)16:4(331) ↗
10. Properties and performance of concrete made with recycled low-quality crushed brick10.1061/(ASCE)MT.1943-5533.0000385 ↗
11. Influence of recycled coarse aggregate derived from construction and demolition waste (CDW) on abrasion resistance of pavement concrete10.1016/j.conbuildmat.2017.03.077 ↗
12. Hydraulic and strength characteristics of pervious concrete containing a high volume of construction and demolition waste as aggregates10.1016/j.conbuildmat.2020.119251 ↗
13. Experimental development of low cement content and recycled construction and demolition waste aggregates concrete10.1016/j.conbuildmat.2020.121680 ↗
14. J. Schoon, Portland Clinker from By-Products and Recycled Materials Out of the Building and Construction Sector, University Gent, Gent, Belgium, 2014.
15. S. Lotfi, C2CA Concrete Recycling Process: From Development To Demonstration, TU Delft, 2016.
16. M. Reinhold, A. Müeller, Lightweight aggregate produced from fine fractions of construction and demolition waste, in: The CIB Task Group 39 – Deconstruction Meeting. CIB Publication 272, University of Karlsruhe, Karlsruhe, Germany, 2002.
17. A. Müeller, S. Liebezeit, U. Palzer, Upgrading of mixed masonry construction and demolition waste to bloated lightweight aggregates, in: IV Int. Conf. Progress of Recycling in the Built Environment, RILEM, Portugal, Lisbon, 2018.
18. The manufacture of lightweight aggregates from recycled masonry rubble10.1016/j.conbuildmat.2015.07.027 ↗
19. DIN EN13055, Lightweight Aggregates, Deutsches Institut fur Normung E.V. (DIN), 2016, p. 54.
20. Relation of chemical properties to the bloating of clays10.1111/j.1151-2916.1951.tb11619.x ↗
21. Lightweight aggregates from waste materials: reappraisal of expansion behavior and prediction schemes for bloating10.1016/j.conbuildmat.2016.09.111 ↗
22. Bloating mechanism in lightweight aggregates: effect of processing variables and properties of the vitreous phase10.1016/j.conbuildmat.2020.119980 ↗
23. Specifications for clayey raw materials used to produce expanded lightweight aggregates10.1007/BF02590206 ↗
24. Techno-commercial perspective study for sintered fly ash light-weight aggregates in India10.1016/S0950-0618(98)00022-1 ↗
25. S. Bethanis, C.R. Cheeseman, S.J. Sollars, Properties and microstructure of sintered incinerator bottom ash. Ceram. Int. 28, Ceramics from municipal waste incinerator bottom ash and wasted clay for sensible heat storage at high temperature, 2002 (20) (2002) 881–886.10.1016/S0272-8842(02)00068-8 ↗
26. Thermal conductivity of lightweight aggregate based on coalfly ash10.1007/s10973-012-2339-x ↗
27. Characteristics of lightweight aggregates from primary and recycled raw materials10.1016/j.conbuildmat.2007.06.009 ↗
28. Manufacturing processes of artificial lightweight aggregates from fly ash10.1016/0262-5075(86)90040-0 ↗
29. Manufacturing of sintered lightweight aggregate using high-carbon fly ash and its effect on the mechanical properties and microstructure of concrete10.1016/j.jclepro.2015.07.001 ↗
30. Coal fly ash in Vietnam and its application as a lightweight material
31. V.H. Le, V.H. Nguyen, V.L. Vu, Properties of cement and concrete using Portland cement blended and ground granulated blast furnace slag as mineral admixture, in: Int. Conf. on Buiding Materials “Science and Technology of Building Materials for Sustainable Development”. 31 Oct.-2 Nov., Hanoi, Vietnam, 2019.
32. Webb · 2001
33. DIN EN1097-6, Tests for Mechanical and Physical Properties of Aggregates – Part 6: Determination of Particle Density and Water Absorption, Deutsches Institut fur Normung E.V. (DIN), p. 51.
34. Rüssemeyer, Auswahl und Aufbereitung von Rohmaterialherstelllung für die Blähtonherstellung, Aufbereitungs-Technik. 4(1969) 198–201.