journal article·2015-11

Mechanical characterization of autoclaved aerated concrete masonry subjected to in-plane loading: Experimental investigation and FE modeling

Daniele Ferretti, Elena Michelini, Gianpaolo Rosati

Publisher page

Abstract

Abstract This paper aims to provide a mechanical characterization of autoclaved aerated concrete (AAC) masonry with thin bed joints subjected to in-plane loading. To this purpose, a detailed experimental program has been carried out on masonry beams subjected to bending and masonry panels subjected to uniaxial and biaxial loads. The obtained results have highlighted an almost isotropic behavior of the material. The collected data have been applied to calibrate a well-known numerical macro-model available in the technical literature for the analysis of classical masonry structures. The effectiveness of the proposed procedure has been finally verified by simulating the experimental behavior of a full-scale AAC bearing wall, through nonlinear finite element analysis.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Masonry and Concrete Structural Analysis · Building materials and conservation · Polymer composites and self-healing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Structure and properties of aerated concrete: a review10.1016/S0958-9465(00)00016-0 ↗
2. Acoustical properties of aerated autoclaved concrete10.1016/j.apacoust.2005.07.003 ↗
3. 2005
4. F.H. Wittmann (Ed.), Proc. 3rd RILEM Int. Symp. on AAC – Advances in Autoclaved Aerated Concrete, Balkema, Rotterdam, 1992.
5. 1993
6. Extended investigation of mechanical properties of masonry units
7. Fire resistance and performance of alternative concrete wall systems
8. P. Delmotte, P. Rivillon, V. Wesierski, M. Hurez, Study on shear walls realized with autoclaved aerated concrete masonry (in French), Cahier du CSTB n. 3492, Livraison 445, 2003.
9. R.E. Klingner, J.E. Tanner, J.L. Varela, R.E. Barnett, Autoclaved aerated concrete: innovative materials and civil infrastructure, in: Proc. Int. Work on Innovation in Materials and Design of Civil Infrastructure, Cairo, 2005, pp. 1–36.
10. Seismic testing of autoclaved aerated concrete shearwalls: a comprehensive review
11. 1983
12. Experimental and numerical issues in the modelling of the mechanical behavior of masonry
13. Development of diametric testing procedures to provide a measure of strength characteristics of masonry assemblages
14. Behavior of concrete block masonry under axial compression
15. Proposed failure criteria for concrete block masonry under biaxial stresses10.1061/JSDEAG.0005772 ↗
16. W. Samarasinghe, A.W. Hendry, The strength of brickwork under biaxial tension–compression, in: Proc 7th Int. Symp. on Load Bearing Brickwork, London, 1980, pp. 129–140.
17. The biaxial compressive strength of brick masonry
18. The strength of brick masonry under biaxial compression-tension
19. The failure of brick masonry under biaxial stresses
20. Biaxial stress–strain relations for brick masonry10.1061/(ASCE)0733-9445(1985)111:5(1085) ↗
21. G.A. Hegemier, R.O. Nunn, S.K. Arya, Behavior of concrete masonry under biaxial stresses, in: Proc. North Amer Masonry Conf., Univeristy of Colorado, Boulder, 1978, pp. 1.1–1.28.
22. Strength of masonry subjected to in-plane loading: a contribution10.1016/j.ijsolstr.2010.11.019 ↗
23. Failure criteria of unreinforced grouted brick masonry based on a biaxial compression test
24. F. da Porto, In plane cyclic behaviour of thin layer joint masonry (PhD Thesis), University of Trento, Italy, 2005.
25. M. Dhanasekar, F. da Porto, Review of the progress in thin bed technology for masonry construction, in: 11th Canadian Masonry Symposium, Toronto, Ontario, 2009, pp. 1003–1014.
26. Unreinforced solid dense concrete block walls constructed using thin bed technology
27. J.A. Thamboo, M. Dhanasekar, C. Yan, Characterisation of flexural bond strength in thin bed concrete masonry, in: 15th Int. Brick and Block Masonry Conf., Federal University of Sao Carlos and Federal University of Santa Catarina, 2012.
28. A. Vermeltfoort, Shear, bond and 2D compressive properties of thin bed mortar masonry, in: Proc. 13th Int. Brick and Block Masonry Conf., Amsterdam, 2004, pp. 1–10.
29. Technical basis for US design provisions for autoclaved aerated concrete masonry
30. Seismic behavior of autoclaved aerated concrete masonry constructions
31. Seismic performance of autoclaved aerated concrete (AAC) masonry: from experimental testing of the in-plane capacity of walls to building response simulation10.1080/13632461003642413 ↗
32. P.B. Lourenço, Computational strategies for masonry structures (Ph.D. Thesis), TU Delft, The Netherlands, 1996.
33. A plane stress softening plasticity model for orthotropic materials10.1002/(SICI)1097-0207(19971115)40:21<4033::AID-NME248>3.0.CO;2-0 ↗
34. Continuum model for masonry parameter estimation and validation10.1061/(ASCE)0733-9445(1998)124:6(642) ↗
35. Cracking in autoclaved aerated concrete: experimental investigation and XFEM modeling10.1016/j.cemconres.2014.09.005 ↗
36. D. Ferretti, G. Gazzola, I. Iori, E. Michelini, G. Rosati, Calibration of a nonlinear anisotropic mechanical model for AAC masonry (in Italian), in: Proc. 18th C.T.E. Congress, Brescia, 2010, pp. 153–162.
37. Fracture toughness of autoclaved aerated concrete10.1016/0008-8846(84)90055-3 ↗
38. Fracture mechanics parameters of autoclaved aerated concrete10.1016/S0008-8846(99)00059-9 ↗
39. UNI EN 1996-1-1:2006, Eurocode 6, Design of masonry structures – Part 1–1: General rules for reinforced and unreinforced masonry structures.
40. J.E. Tanner, Design provisions for autoclaved aerated concrete (AAC) structural systems, (PhD Thesis), University of Texas, Austin, 2003.
41. P.B. Lourenço, K. Palácio, F. Prieto, Implementation of a constitutive model for masonry shells as a stand-alone subroutine, Report 02-DEC/E-13, Universidade do Minho, Departamento de Engenharia Civil, 2002.
42. ABAQUS 6.12, Online Documentation, Dassault Systémes Simulia Corp.
43. Explicit finite element analysis of lightly reinforced masonry shear walls10.1016/j.compstruc.2007.06.006 ↗
44. L.J. van der Meer, Unbonded post-tensioned shear walls of calcium silicate element masonry (PhD Thesis), Eindhoven University of Technology, 2013, ISBN: 978-90-386-3374-9.