Microstructure modification of cement mortars: Effect on capillarity and frost-resistance
Source abstract
Abstract
Abstract The paper presents results of tests on capillarity, frost-resistance and micro-structural parameters of four cement mortars. Basic cement mortar, which was the reference recipe I, was modified “option by option”, becoming gradually recipes II, III and IV. In recipe II, a superplasticizer was used, causing a noticeable reduction of the w / c ratio. In recipe III, silica fume was applied. Whereas recipe IV contained an air-entraining agent. Firstly, an experiment on capillary rise in the tested mortars was carried out. The tests for all mortars I, II, III and IV lasted two months and the resulting data on capillary rise were used to determine sorption coefficients. Frost-resistance of each mortar was evaluated on the basis of their mechanical strength after 80 cycles of freezing-thawing of four sample series type I, II, III and IV. Structural parameters were measured using the Mercury Intrusion Porosimetry (MIP). According to the porosimetry test results, it was concluded that application of the selected admixtures and additives distinctly influences pore structures of the mortars. The capillarity experiment indicated that modifications made to the internal structure of the mortars resulted in a different course of the water uptake process. Application of a superplasticizer, silica fume and an air-entraining agent in tested mortars led to decrease of the water sorption coefficient characterizing the rate of capillary suction in the first few hours of contact between water and the material. Another effect of the use of air-entraining agent was revealed in a subsequent phase of the experiment in a significant water absorption. The freeze–thaw test showed that all the undertaken material modifications resulted in an absolute frost-resistance of the mortars II, III, IV after an established number of freeze–thaw cycles, whereas in the reference mortar I more than 60% decrease of compressive strength was noted.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Building materials and conservation · Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Assessment of the durability of concrete from its permeation properties: a review10.1016/S0950-0618(00)00058-1 ↗
2. Microstructure and durability of mortars modified with medium active blast furnace slag10.1016/j.conbuildmat.2010.06.077 ↗
3. Relationship between liquid sorptivity and capillarity in concrete10.1016/S0008-8846(03)00070-X ↗
4. Capillary suction model for characterizing salt scaling resistance of concrete containing GGFS10.1016/j.cemconcomp.2009.01.004 ↗
5. Mesoscale modeling of water penetration into concrete by capillary absorption10.1016/j.oceaneng.2010.12.019 ↗
6. Hohmann · 2004
7. PN-EN ISO 9346:2009 Hygrothermal performance of buildings materials – Physical quantities for mass transfer – Vocabulary.
8. Garbalińska H. Isothermal coefficients of moisture transport for porous building materials. Scientific Works of Szczecin University of Technology, Bulletin No. 571, Szczecin 2002 (in Polish).
9. Neutron radiography studies of water migration in construction porous materials10.1109/TNS.2005.843642 ↗
10. Neutron radiography study of water absorption in porous building materials: anomalous diffusion analysis10.1088/0022-3727/37/16/013 ↗
11. High-speed radiography for monitoring the water absorption by capillarity in porous materials10.1016/j.nimb.2007.10.030 ↗
12. Testing durability of concrete with neutron radiography10.1016/j.nima.2005.01.104 ↗
13. Capillary absorption in concrete and Lucas–Washburn equation10.1016/j.cemconcomp.2009.10.005 ↗
14. Dynamic neutron radiography observations of water migration in porous media10.1016/j.nima.2005.01.105 ↗
15. A simple gravimetric method for determining the moisture diffusivity of building materials10.1016/S0950-0618(02)00033-8 ↗
16. Influence of elevated temperature on selected properties of high performance concrete modified with the addition of polypropylene fibres
17. Automatische Messung des Wasseraufnahmekoeffizienten und des kapillaren Wassergehaltes von porösen Baustoffen10.1002/bapi.200590108 ↗
18. A water sorptivity test for mortar and concrete10.1007/BF02481540 ↗
19. Feuchtediffusionskoeffizienten von Zementmörteln mit verschiedenen Wasserzementwerten
20. Study on coefficients of capillary flow by means of Wet-Cup method and Inverse-Wet-Cup method
21. Kapillarer Wassertransport in Zementmörtel. Experimentelle Bestimmung der Koeffizienten des kapillaren Saugens10.1002/bapi.200200410 ↗
22. The effects of thermal load and frost cycles on the water transport in two high-performance concretes10.1016/S0008-8846(01)00556-7 ↗
23. Capillary transport in mortars and concrete10.1016/S0008-8846(97)00052-5 ↗
24. The effects of air entrainment and pozzolans on frost resistance of 50–60 MPa grade concrete10.1016/j.conbuildmat.2006.02.002 ↗
25. Durability of masonry systems: a laboratory study10.1016/j.conbuildmat.2005.07.008 ↗
26. Freeze–thaw resistance of blended cements containing calcined paper sludge10.1016/j.conbuildmat.2009.02.034 ↗
27. Examining the frost resistance of high perfomance concrete10.1016/j.conbuildmat.2008.04.006 ↗
28. Effect of supplementary cementitious materials on compressive strength and durability of short-term cured concrete10.1016/j.cemconres.2003.08.017 ↗
29. The effect of silica fume and high-volume class C fly ash on mechanical properties, chloride penetration and freeze–thaw resistance of self-compacting concrete10.1016/j.conbuildmat.2007.01.002 ↗
30. Effect of pozzolans on the performance of fiber-reinforced mortars10.1016/j.cemconcomp.2004.09.010 ↗
31. Combined effect of mineral admixtures and curing conditions on the sorptivity coefficient of concrete10.1016/S0008-8846(03)00112-1 ↗
32. Durability performance of concrete containing condensed silica fume10.1016/S0008-8846(99)00064-2 ↗
33. Durability of mortars modified with metakaolin10.1016/S0008-8846(03)00090-5 ↗
34. PN-EN ISO 15148 Hygrothermal performance of building materials and products – Determination of water absorption coefficient by partial immersion.
35. PN-EN 1015–18 Methods of test for mortar for masonry – Determination of water absorption coefficient due to capillary action of hardened mortar.
36. Prüfkörperabdichtung und der Wasserabsorptionskoeffizient von mit Polypropylenfasern modifizierten Zementmörteln10.1002/bapi.200710056 ↗
37. Wygocka A. Capillarity of cement mortars modified with polypropylene fibers. PhD thesis. Szczecin, West Pomranian University of Technology; 2010 (in Polish).
38. PN-88/B-06250 Regular concrete. (Polish standard).
39. PN-EN 12390–3:2009 Testing hardened concrete – Part 3: Compressive strength of test specimens.