Characteristics of boroaluminosilicate geopolymers
Source abstract
Abstract
In this work, a new method for incorporating fly ash in constructional technology was developed by production of boroaluminosilicate geopolymers. These new class of geopolymers were appropriately synthesized from mixtures of fly ash and anhydrous borax and compressive strengths as high as 64 MPa are achievable by using suitable amount of borax. Different types of microstructures were observed by changing mixture proportion of the specimens. All of specimens revealed a brittle fracture with no crack branching in the mixture. Additionally, less unreacted fly ash particle was observed in the considered pastes indicating a totally different fracture mechanism in boroaluminosilicate geopolymers with respect to aluminosilicate ones. FT-IR analyses of the mixtures revealed an additional B-O bond with respect to aluminosilicate geopolymers. It was shown that this bond is a key factor to determine compressive strength and specimens with no B-O bond have the lowest strength.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Correlating mechanical and thermal properties of sodium silicate-fly ash geopolymers10.1016/j.colsurfa.2008.11.019 ↗
2. Chemical and freeze-thaw resistance of fly ash-based inorganic mortars10.1016/j.fuel.2013.04.070 ↗
3. A comprehensive overview about the influence of different admixtures and additives on the properties of alkali-activated fly ash10.1016/j.matdes.2013.07.074 ↗
4. Effect of curing temperature on the development of hard structure of metakaolin-based geopolymer10.1016/j.conbuildmat.2009.12.023 ↗
5. Strength and microstructure of alkali-activated binary blended binder containing palm oil fuel ash and ground blast-furnace slag10.1016/j.conbuildmat.2013.11.012 ↗
6. Use of glass waste as an activator in the preparation of alkali-activated slag. Mechanical strength and paste characterisation10.1016/j.cemconres.2013.12.005 ↗
7. Kinetics of geopolymerization: role of Al2O3 and SiO210.1016/j.cemconres.2007.01.003 ↗
8. Synthesis of sodium and potassium aluminogermanate inorganic polymers10.1016/j.matlet.2011.04.008 ↗
9. The phase evolution of phosphoric acid-based geopolymers at elevated temperatures10.1016/j.matlet.2011.08.043 ↗
10. Development of alkali activated borosilicate inorganic polymers (AABSIP)10.1016/j.jeurceramsoc.2011.02.021 ↗
11. Effect of different superplasticizers and activator combinations on workability and strength of fly ash based geopolymer10.1016/j.matdes.2014.01.064 ↗
12. Synthesis of geopolymer composites from blends of CFBC fly and bottom ashes10.1016/j.fuel.2012.02.059 ↗
13. Influence of curing conditions on properties of high calcium fly ash geopolymer containing Portland cement as additive10.1016/j.matdes.2013.07.018 ↗
14. Influence of iron making slags on strength and microstructure of fly ash geopolymer10.1016/j.conbuildmat.2012.09.070 ↗
15. Strength development in clay–fly ash geopolymer10.1016/j.conbuildmat.2012.11.015 ↗
16. The effect of adding nano-SiO2 and nano-Al2O3 on properties of high calcium fly ash geopolymer cured at ambient temperature10.1016/j.matdes.2013.09.049 ↗
17. Synthesis and characterization of geopolymer from Bayer red mud with thermal pretreatment10.1111/jace.12840 ↗
18. Formation of ceramics from metakaolin-based geopolymers: Part I—Cs-based geopolymer10.1111/j.1551-2916.2008.02790.x ↗
19. Formation of ceramics from metakaolin-based geopolymers. Part II: K-based geopolymer10.1111/j.1551-2916.2008.02922.x ↗
20. Effects of NaOH concentrations on physical and electrical properties of high calcium fly ash geopolymer paste10.1016/j.cemconcomp.2013.09.012 ↗
21. XPS and FT-IR investigation of silicate polymers10.1007/s10853-009-3270-9 ↗
22. Monomeric and dimeric structures analysis and spectroscopic characterization of 3, 5-difluorophenylboronic acid with experimental (FT-IR, FT-Raman, 1H and 13C NMR, UV) techniques and quantum chemical calculations10.1016/j.molstruc.2013.10.064 ↗