Thermal characteristics of high-strength polymer–cement composites with lightweight aggregates and polypropylene fiber
Source abstract
Abstract
Abstract Recently, research has been conducted using fibers to reduce the explosive spalling of concrete. Assessments of the volume fraction of polypropylene fiber in high-strength and lightweight concrete has shown that an optimum volume fraction of fiber reduces explosive spalling by discharging pore pressure and heat stress inside the concrete through the dissolution of fibers during exposure to high temperatures. In this study, we manufactured a high-strength polymer–cement mortar that can be used in repairs of many concrete structures by selecting three kinds of lightweight aggregate that have excellent heat interception performance, combined with varying volume fractions of polypropylene fiber to reduce explosive spalling. We analyzed the thermal characteristics and physical and mechanical properties of the mortar at high temperature. The analysis of test results for compressive strength, flexural strength, thermal conductivity, and thermogravimetric showed that a mixture of expanded perlite with high thermal stability and 0.2% polypropylene fiber showed the best physical, mechanical, and thermal characteristics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fire effects on concrete materials · Innovative concrete reinforcement materials · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. High-temperature behavior of HPC with polypropylene fiber from spalling to microstructure10.1016/S0008-8846(01)00596-8 ↗
2. Residual strength of hybrid-fiber-reinforced high-strength concrete after exposure to high temperatures10.1016/j.cemconres.2003.11.010 ↗
3. High strength polymer-modified repair cementitious composite for fire protection
4. Schmeider U. Properties of material at high temperatures-concrete. 2nd RILEM Report, Gesamthochule Kassel, Germany; 1986.
5. Limits of spalling of fire-exposed concrete10.1016/S0379-7112(02)00051-6 ↗
6. Optimization of the type and amount of polypropylene fibres for preventing the spalling of lightweight concrete subjected to hydrocarbon fire10.1016/S0958-9465(03)00091-X ↗
7. Fiber–cement extrudates with pearlite subject to high temperatures10.1061/(ASCE)0899-1561(2004)16:3(221) ↗
8. Manufacture of high heat conductivity resistant clay bricks containing pearlite10.1016/j.buildenv.2006.10.016 ↗
9. Felicetti R, Gambarova PG, Corsi F, Giannuzzi G. Residual mechanical properties of high-strength concrete subjected to high-temperature cycles. In: 4th international symposium on utilization of high-strength/high-performance concrete, France; 1996. p. 579–88.
10. Tatnall PC. Shorcrete in fires: effect of fibers on explosive spalling. Magazine of shorcrete; 2009 [Fall: 10–12].
11. Explosive spalling and residual mechanical properties of fiber-toughened high-performance concrete subjected to high temperatures
12. Hammer TA. High-strength concrete phase 3, spalling reduction through material design SP6 fire resistance. Report 6.2, SINTEF Structures and Concrete; 1995.
13. Nishida A, Yamazaki H, Inoue U, Schneidr U. Study on the properties of high strength concrete with short polypropylene fibers for spalling resistance. In: Proceedings of the symposium on concrete under severe environment, vol. 2; 1995. p. 1141–50.
14. Hj NP. Hazards in tunnels structural integrity. In: Safe & tunnels, 1st international symposium, Prague; 2004. p. 61–72.
15. Spalling and pore pressure in HPC at high temperatures10.1016/S0008-8846(00)00384-7 ↗
16. Aldea CM, Franssen JM, Dotreppe JC. Fire test on normal and high-strength reinforced concrete columns. In: Proceedings of the international workshop on fire performance of high-strength concrete, NIST Special Publication 919; 1997. p. 109–24.
17. Coating protection of loaded RC columns to resist elevated temperature10.1016/j.firesaf.2008.06.010 ↗