Behaviour of FRP-to-concrete interfaces between two adjacent cracks: A numerical investigation on the effect of bondline damage
Source abstract
Abstract
Abstract The bond behaviour between FRP and concrete has been commonly studied using simple pull-off tests on bonded joints where an FRP plate bonded to a concrete prism is pulled at one end to induce debonding failure. Knowledge gained from such studies has been directly employed in predicting debonding failure in FRP-plated concrete beams induced by major flexural cracks, but significant differences exist between the two scenarios. The chief difference lies in the interaction between adjacent flexural cracks in a flexural member which is absent in a joint pull-off test. This interaction may be approximated using an FRP-to-concrete bonded joint where the FRP plate is pulled at both ends. This paper presents a numerical study into this bonded joint problem, with the main objective being to clarify the effect of bondline damage during slip reversals on the ultimate load. The study shows that such damage has a significant effect on the predicted bond behaviour and ultimate load when the ratio between the end loads is larger than 0.7, particularly when the bond length is reasonably large. An important implication of the present study is that in the modelling (e.g. finite element modelling) of debonding behaviour of FRP-plated RC beams where multiple cracks exist, the FRP-to-concrete interface should be represented using a bond-slip model with appropriate consideration of the damaged behaviour during slip reversals in order to achieve accurate predictions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Bank · 2006
2. Hollaway · 2008
3. Oehlers · 2004
4. Teng · 2002
5. Role of bond in RC beams strengthened with steel and FRP plates10.1061/(ASCE)0733-9445(2001)127:12(1445) ↗
6. Progress on understanding debonding problems in reinforced concrete and steel members strengthened using FRP composites10.1016/S0950-0618(03)00094-1 ↗
7. Intermediate crack debonding in FRP-strengthened RC beams: FE analysis and strength model10.1061/(ASCE)1090-0268(2007)11:2(161) ↗
8. Modeling of IC debonding of FRP-strengthened concrete flexural members10.1061/(ASCE)1090-0268(2008)12:2(168) ↗
9. Mechanics of debonding in FRP-plated RC beams10.1680/stbu.2009.162.5.335 ↗
10. Anchorage strength models for FRP and steel plates bonded to concrete10.1061/(ASCE)0733-9445(2001)127:7(784) ↗
11. Experimental study on FRP-to-concrete bonded joints10.1016/j.compositesb.2004.06.001 ↗
12. Bond-slip models for FRP sheets/plates bonded to concrete10.1016/j.engstruct.2005.01.014 ↗
13. Intermediate crack-induced debonding in RC beams and slabs10.1016/S0950-0618(03)00043-6 ↗
14. FRP-to-concrete interfaces between two adjacent cracks: theoretical model for debonding failure10.1016/j.ijsolstr.2005.07.023 ↗
15. Debonding failure along a softening FRP-to-concrete interface between two adjacent cracks in concrete members10.1016/j.engstruct.2006.04.017 ↗
16. Study on behavior in tension of reinforced concrete members strengthened by carbon fiber sheet10.1061/(ASCE)1090-0268(2002)6:3(168) ↗
17. Sato Y, Ueda T, Shoji K. Tension stiffening effect of reinforced concrete member strengthened by carbon fiber sheet. In: Bond in concrete – from research to standards – Proceedings Budapest University of Technology and Economics, Budapest, Hungary; 2002. p. 606–13.
18. Uniaxial tension behavior of reinforced concrete members strengthened with carbon fiber sheets10.1061/(ASCE)CC.1943-5614.0000175 ↗
19. Meso-scale finite element model for FRP sheets/plates bonded to concrete10.1016/j.engstruct.2004.11.015 ↗
20. Feenstra PH. Computational aspects of biaxial stress in plain and reinforced concrete: PhD thesis, Delft University of Technology; 1993.
21. Rots JG. Computational modeling of concrete fracture: PhD thesis, Delft University of Technology; 1988.
22. Crack models for concrete: discrete or smeared? fixed, multi-directional or rotating?
23. Bazant · 1998
24. Hordijk DA. Local approach to fatigue of concrete: PhD thesis, Delft University of Technology; 1991.
25. A fracture energy based constitutive model for the analysis of reinforced concrete structures under cyclic loading10.1016/j.cma.2008.06.017 ↗
26. Experimental investigation of bonded fiber reinforced polymer-concrete joints under cyclic loading10.1061/(ASCE)1090-0268(2003)7:2(127) ↗
27. Fatigue of CFRPs externally bonded to concrete10.1617/14041 ↗
28. Fatigue behavior of externally strengthened concrete beams with fiber-reinforced polymers: state of the art10.1061/(ASCE)1090-0268(2008)12:3(246) ↗
29. Bond stress–slip relationship between FRP sheet and concrete under cyclic load10.1061/(ASCE)1090-0268(2007)11:4(419) ↗
30. Chen JF, Tao Y. Finite element modelling of FRP-to-concrete bond behaviour using concrete damage plasticity theory combined with a plastic degradation model. In: The 5th international conference on FRP composites in Civil Engineering (CICE 2010), Beijing, China; 2010. p. 45–50.10.1007/978-3-642-17487-2_7 ↗
31. Chen GM, Chen JF, Teng JG. On the finite element modelling of RC beams shearstrengthened with FRP. Constr Build Mater, inpress. doi:10.1016/j.conbuildmat.2010.11.101.10.1016/j.conbuildmat.2010.11.101 ↗
32. Finite element modeling of intermediate crack debonding in FRP-plated beams10.1061/(ASCE)CC.1943-5614.0000157 ↗
33. FE investigation of material and preload parameters on FRP strengthening performance of RC beams, I: model development10.1177/0731684407083954 ↗
34. Diagonal macro-crack induced debonding mechanisms in FRP rehabilitated concrete10.1016/j.compositesb.2006.03.001 ↗
35. Numerical analysis of debonding mechanisms in FRP-strengthened RC beams10.1111/j.1467-8667.2005.00402.x ↗
36. ABAQUS. ABAQUS 6.5 User’s Manual. ABAQUS, Inc., Providence, RI; 2004.
37. Camanho PP, Davila CG. Mixed-mode decohesion finite elements for the simulation of delamination in composite materials. NASA/TM-2002-211737; 2002.10.2514/6.2001-1486 ↗
38. Full-range behavior of FRP-to-concrete bonded joints10.1016/j.engstruct.2003.11.006 ↗