Towards the assessment of the shear behaviour of masonry in on-site conditions: A study on dry and salt/water conditioned brick masonry triplets
Source abstract
Abstract
Abstract In this paper an experimental study conducted on fired-clay brick masonry triplets built with cement- and hydraulic lime-based mortars and subjected to artificial weathering cycles is presented. A cycle is constituted by (1) a wetting phase by capillary rise of either a saline solution or deionized water and (2) a drying phase in oven. The aim of the accelerate weathering cycles is to simulate on-site conditions of masonry structures subjected to rising damp and salts attack due to daily and seasonal microclimatic changes. For comparison purposes, triplets subjected to drying cycles only were also considered. At the end of the weathering process, the triplets were shear tested in order to quantitative assess the separate and combined effect of water and salts within the pores on the mechanical behaviour. Shear parameters were interpreted on the basis of the microstructural characteristics of the constituent materials. Particular attention was given to the pore size distribution, salt amount, and distribution within the specimens after the conditioning procedure, finding significant correlations. Results show that the triplets shear behaviour is influenced by the damp/salts presence to a different extent depending on the materials involved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Building materials and conservation · Masonry and Concrete Structural Analysis · Hygrothermal properties of building materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Repair systems for the restoration of ancient buildings – dampness rise problem10.1515/rbm-2007-6129 ↗
2. An experimental fixture for continuous monitoring of electrical effects in moist masonry walls10.1016/j.conbuildmat.2010.11.047 ↗
3. The effect of moisture on significant mechanical characteristics of masonry
4. Rising moisture, salts and electrokinetic effects in ancient masonries: from laboratory testing to on-site monitoring10.1016/j.culher.2013.03.003 ↗
5. The effects of pre and post construction moisture condition on the in-plane and out-of-plane strengths of brick walls10.1617/s11527-010-9648-y ↗
6. The effects of humidity and other environmental parameters on the shear strength of brick walls: evaluation of field test data10.1617/s11527-011-9809-7 ↗
7. Masonry elements with damp-proof course membrane: assessment of shear strength parameters10.1016/j.conbuildmat.2012.04.033 ↗
8. An operative protocol for reliable measurements of moisture in porous materials of ancient buildings10.1016/j.buildenv.2005.05.023 ↗
9. Rising damp removal from historical masonries: a still open challenge10.1016/j.conbuildmat.2013.12.054 ↗
10. Salts in the deterioration of porous materials: an overview10.1179/019713600806113176 ↗
11. The role of sea salts in the occurrence of different damage mechanisms and decay patterns on brick masonry10.1016/j.conbuildmat.2003.08.017 ↗
12. Treatment of rising damp and salt decay: the historic masonry buildings of Adelaide, South Australia10.1617/s11527-008-9427-1 ↗
13. Advances in understanding damage by salt crystallization10.1021/ar9002224 ↗
14. NaCl crystallization in restoration plasters10.1016/j.conbuildmat.2008.09.010 ↗
15. Crystallization of sodium sulfate phases in porous materials: the phase diagram Na2SO4–H2O and the generation of stress10.1016/j.gca.2008.05.053 ↗
16. Durability of masonry systems: a laboratory study10.1016/j.conbuildmat.2005.07.008 ↗
17. Influence of microstructure on the resistance to salt crystallisation damage in brick10.1617/s11527-005-9037-0 ↗
18. Spontaneous electrical effects in masonry affected by capillary water rise: the role of salts10.1016/j.conbuildmat.2012.04.098 ↗
19. Experimental evidence of crystallization pressure inside porous media10.1103/PhysRevLett.94.075503 ↗
20. A coupled multiphase model for hygrothermal analysis of masonry structures and prediction of stress induced by salt crystallization10.1016/j.conbuildmat.2012.12.045 ↗
21. Mathematical simulation of structural damage in historical buildings
22. Crystallization in pores10.1016/S0008-8846(99)00002-2 ↗
23. Stress from crystallization of salt10.1016/j.cemconres.2003.12.034 ↗
24. Crystallization damage by sodium sulfate10.1016/S1296-2074(03)00022-0 ↗
25. Salt weathering: influence of evaporation rate, supersaturation and crystallization pattern10.1002/(SICI)1096-9837(199903)24:3<191::AID-ESP942>3.0.CO;2-G ↗
26. Damage in porous media due to salt crystallization10.1103/PhysRevE.81.066110 ↗
27. Damage development to treated brick masonry in a long-term salt crystallisation test10.1016/j.conbuildmat.2004.02.006 ↗
28. Microscopy applied to the diagnosis of the deterioration of brick masonry10.1016/j.conbuildmat.2004.02.002 ↗
29. Performance of limestone cement mortars in a high sulfates environment10.1016/j.conbuildmat.2008.05.001 ↗
30. How does sodium sulfate crystallize? Implications for the decay and testing of building materials10.1016/S0008-8846(00)00381-1 ↗
31. Castellazzi G, Gentilini C, Nobile L. Seismic vulnerability assessment of a historical church: limit analysis and nonlinear finite element analysis. Adv Civ Eng 2013, art. no. 517454.10.1155/2013/517454 ↗
32. Determination of shear strength of historic masonries by moderately destructive testing of masonry cores10.1016/j.conbuildmat.2013.12.039 ↗
33. Effect of salt crystallisation on the shear behaviour of masonry walls: an experimental study10.1016/j.conbuildmat.2012.07.086 ↗
34. Irreversible dilation of NaCl contaminated lime–cement mortar due to crystallization cycles10.1016/j.cemconres.2005.10.008 ↗
35. Effect of mixed in crystallization inhibitor on resistance of lime–cement mortar against NaCl crystallization10.1016/j.conbuildmat.2010.06.010 ↗
36. Development of a new accelerated salt crystallization test
37. EN 1052-3. Methods of test for masonry. Part 3: Determination of initial shear strength; 2007.
38. Shear strength of brick masonry walls assembled with different types of mortar10.1016/j.conbuildmat.2012.11.107 ↗
39. Hypothesis for shear failure in masonry joints
40. The failure of brick triplet test specimens
41. Experimental characterization of stone masonry in shear and compression10.1016/j.conbuildmat.2009.06.045 ↗
42. Shear behaviour of historic masonry made of clay bricks10.2174/1874836801105010089 ↗
43. EN 772-1. Methods of test for masonry units. Part 1: Determination of compressive strength; 2011.
44. EN 14580. Natural stone test methods. Determination of static elastic modulus; 2005.
45. EN 196-1. Methods of testing cement – Part 1: Determination of strength; 2005.
46. Influence of the nature of interfaces on the capillary transport in layered materials10.1016/j.conbuildmat.2011.03.063 ↗
47. Role of pore size distribution in salt uptake, damage, and predicting salt susceptibility of eight types of Japanese building stones10.1016/j.enggeo.2009.05.007 ↗
48. Amoroso · 1983
49. The effects of wetting and drying, and marine salt crystallization on calcarenite rocks used as building material in historic monuments10.1144/GSL.SP.2007.271.01.18 ↗
50. Experimental and mathematical modeling for fracture of rock joint with regular asperities10.1016/S0013-7944(02)00072-3 ↗
51. Effect of asperity damage on shear behavior of single fracture10.1016/S0013-7944(02)00073-5 ↗