journal article·2015-03Open access

Experimental study on the properties of corroded steel fibres

Gang Chen, Muhammad N.S. Hadi, Danying Gao, Liangping Zhao

Abstract

Abstract In this study, low carbon steel fibres were corroded to various corrosion degrees by cycling in 3.5% NaCl solution and 60 °C oven, and by applying a designed current density of 20 mA/cm 2 . Then the corrosion characters and corrosion degree on tensile strength of the two types of corroded steel fibres were investigated. It was found that the cycles induce pitting and the current induces relatively uniform corrosion. The results of tensile test show that the actual tensile strength of steel fibres was reduced in the case of pitting, while it was marginally affected by uniform corrosion. As the corrosion degree increased, both of the nominal tensile strength and elongation of the two types of corroded steel fibres decreased. In addition to weight loss, local section loss at the pits is the main reason for further degradation of the mechanical properties of steel fibres and gives a brittle failure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Smart Materials for Construction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Some practical applications of steel fibre reinforced concrete
2. Reinforcement corrosion-induced cover cracking and its time prediction for reinforced concrete structures10.1016/j.corsci.2010.12.026 ↗
3. Mechanical properties of corrosion-damaged reinforcement
4. Mechanical response of corroded steel reinforcement of abandoned concrete bridge
5. Load carrying capacity of concrete structures with corroded reinforcement10.1016/S0950-0618(97)00043-3 ↗
6. Bond behavior of corroded reinforcement bars
7. Corrosion of steel fiber reinforced concrete
8. The mechanism of corroded expansion force of reinforced concrete members
9. Effect of degree of corrosion on the properties of reinforcing steel bars10.1016/S0950-0618(01)00009-5 ↗
10. Pourbaix · 1966
11. Applications of electrochemistry in corrosion science and in practice10.1016/S0010-938X(74)80006-5 ↗
12. Surface corrosion of steel fibre reinforced concrete10.1016/j.cemconres.2009.10.001 ↗
13. Durability of fiber reinforced concrete in a severe marine environment
14. Corrosion of steel fibre reinforced concrete from the cracks10.1016/j.cemconres.2004.06.032 ↗
15. Waweru · 2011
16. Water Sydney · 2013
17. Corrosive effects of chlorides on metals
18. A comparative study on structural behavior of deteriorated reinforced concrete beam under two different environments
19. ASTM A820/A820 M · 2011
20. Nordström · 2000
21. Effect of aggressive environment on steel fibre reinforced concrete
22. Durability of steel fibre concrete