journal article·2012-01

Interlayer bond testing using a model material

Christiane Raab, A.O. Abd El Halim, Manfred N. Partl

Publisher page

Abstract

Abstract Bond problems between asphalt layers are attracting more attention due to the continuous refinement of pavement design methodologies. However, research nowadays is mainly focussing on the practical evaluation of specific pavement material types and tack coat materials. In this paper, the influence of aggregate interlock combining different aggregate sizes on the shear strength between two layers is evaluated. Using a model material composed of idealized aggregates represented by steel balls and 10/20 penetration graded bitumen, this study is investigating the question on how the ball size and/or a combination of different ball sizes influence interlayer shear strength and shear stiffness. Shear bond testing was done using the Layer Parallel Shear Test (LPDS) with two different test speeds as well as a Shear Box with varying normal stress.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. Halim Abd El AO, Rickards I, Haas R, Nabi R. Evaluation of design and construction effects on asphalt pavement performance through a portable in-situ shear test device. In: 8th international conference on asphalt pavements, proceedings, vol. 2; 1997.
2. Mohammad L.N., Raqib M.A., Wu Z., Huang B. Measurement of interlayer bond strength through shear tests. In Proc. of the 3rd international conference bituminous mixtures and pavements, Thessaloniki, Greece 2002.
3. Shear fatigue behaviour of tack coats in pavements10.1080/14680629.2006.9690033 ↗
4. Choi Y, Collop A, Airey G, Elliot R. A comparison between interface properties measured using the Leutner test and the torque test. J Assoc Asphalt Paving Technol 74E. ISSN 1553-5576. [CD-ROM]; 2005.
5. Mohammad LN, Bae A, Elseifi M. Effect of Tack coat materials and application rate on the interface shear strength. In: Proceedings of sixth international conference on maintenance and rehabilitation of pavements and technological control Mairepav6, vol II. Torino, Italy; 8–10th July, 2009. p. 636–45.
6. Properties of asphalt concrete layer interfaces10.1061/(ASCE)0899-1561(2006)18:3(467) ↗
7. Advanced testing and characterization of interlayer shear resistance
8. Untersuchungen des Schichtenverbunds beim bituminösen Oberbau [Investigation of the adhesion of bituminous pavements]
9. Partl MN, Raab C. Shear adhesion between top layers of fresh asphalt pavements in Switzerland. In: Proc of the 7th conference on asphalt pavements for Southern Africa (CAPSA’99). Victoria Falls, Zimbabwe; 29 August–2 September, 1999. p. 5.130–7.
10. Raab C, Partl MN. Methoden zur Beurteilung des Schichtenverbunds von Asphaltbelägen [Methods to determine the bond of asphalt pavements]. ASTRA-Project FA 12/94, Report No 442; 1999. 118p.
11. Santagata E, Canestrari F. Laboratory shear testing of tack coat emulsion. In: Proceeding of the 1th world congress on emulsion. Paris; 1993.
12. Raab C, Partl MN, Abd El Halim AO. Effect of gap width on interlayer shear bond results. Int J Pavement Res Technol IJPRT Reference No.: IJPRT-09544(3), vol 3(2); March, 2010.