Experimental and numerical analysis of a halved and tabled traditional timber scarf joint
Source abstract
Abstract
Abstract Traditionally constructed heavy timber trusses, found in timber framed buildings and bridges, employ various traditional joints, among them the lower chord scarf joint. This paper examines the behavior of a halved and tabled scarf joint, which was studied as an isolated structural component using experimental tests and finite element analyses. Experimental tests identified two different limit states for these particular scarf joints: shear failure parallel to grain and tension failure perpendicular to grain. The possibility of failure due to tension perpendicular to grain results from variations in grain angle and means that the limit state of shear failure parallel to grain, typically assumed in analysis and design, is unconservative. For the purposes of design and rehabilitation, the authors propose that the scarf joint be treated as a member subject to combined bending and axial tension forces. The results of the finite element analysis, performed using solid continuum elements in ABAQUS, are in good agreement with the experimental test results. In addition to finite element models, the authors use analytical spring models to demonstrate that when developing a two-dimensional model of a truss with lower chord scarf joints, serviceability limit states be checked with a model that reduces the lower chord section properties in the vicinity of the scarf joints.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Wood Treatment and Properties · Civil and Structural Engineering Research · Structural Analysis of Composite Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. American Forest and Paper Association (AF&PA). Standard for load and resistance factor design for engineered wood construction. AF&PA/ASCE 16–95, Washington, DC; 1996.
2. American Forest and Paper Association (AF&PA). National design specification (NDS) for wood construction, Washington, DC; 2005.
3. American Society of Testing and Materials (ASTM). Standard test methods for small clear specimens of timber. ASTM D143-94, West Conshohocken, PA; 1994.
4. American Society of Testing and Materials (ASTM). Standard methods for establishing clear wood strength values. ASTM D2555-98, West Conshohocken, PA; 1998.
5. American Society of Testing and Materials (ASTM). Standard practice for establishing structural grades and related allowable properties for visually graded lumber. ASTM D245-00, West Conshohocken, PA; 2000.
6. Bodig · 1993
7. Brungraber RL. Traditional timber joinery: a modern analysis. PhD thesis, Department of Civil Engineering, Stanford University, Palo Alto, CA, 1985.
8. Brungraber RL, Morse-Fortier L, Wooden Peg Tests. Vermont Department of Transportation, contract TH 9290; 1995.
9. Hibbit, Karlsson, Sorenson ABAQUS/CAE Version 6.4-2, Pawtucket, RI; 2003.
10. Kharouf N. Post-elastic behavior of bolted connections in wood. PhD thesis, Department of Civil Engineering and Applied Mechanics, McGill University, Montreal, Canada, 2001.
11. Patton-Mallory M. The three-dimensional mechanics and failure of single bolt wood connections. PhD thesis, Department of Civil Engineering, Colorado State University, Fort Collins, CO; 1996.
12. Strength and stiffness of oak pegs in traditional timber-frame joints10.1061/(ASCE)0733-9445(2000)126:6(717) ↗
13. Sandberg LB, Bulleit WM, O’Bryant TL, Postlewaite JJ, Schaffer JJ. Experimental evaluation of traditional timber connections. In: Proceedings of the international wood engineering conference, New Orleans, La. p. 225–31.
14. Sangree RH. Covered wooden bridges: an experimental and numerical investigation of system and component behavior. PhD thesis, Department of Civil Engineering, Johns Hopkins University, Baltimore, MD; 2006.
15. Sangree RH, Schafer BW. Field experiments and numerical models for the global condition assessment of historic timber bridges. J Bridge Eng, ASCE Manuscript Number BE/2006/023281, in press.
16. Sobon JA. Historic American timber joinery. Timber Framers Guild, Becket, MA; 2002.
17. US Department of Agriculture (USDA), Forest Service. Wood handbook: wood as an engineering material, General technical report FPL-GTR-113, Forest Products Laboratory, Madison, WI; 1999.
18. Failure theories for Douglas-Fir in tension10.1061/(ASCE)0733-9445(1988)114:12(2808) ↗