journal article·2014-03

High and low cycle fatigue performance comparison between micro-alloyed and TMT rebar

Surajit Kumar Paul, Pritam Kumar Rana, Debdulal Das, Sanjay Chandra, Saurabh Kundu

Publisher page

Abstract

Abstract High and low cycle fatigue performance of micro-alloyed and TMT rebars are compared through experimental investigation. Micro-alloyed rebar shows better fatigue performance than TMT rebar. It is experimentally observed in both micro-alloyed and TMT rebars that for high and low cycle fatigue, crack initiates form the transverse rib root and propagate along the same region. From finite element simulation, it is noticed that the stress concentration takes place at the root of the transverse rib and stress triaxiality becomes higher in the same region. At the transverse rib root, tensile strain accumulation is noticed in simulation. The experimental observation is explained with the help of simulation result that fatigue crack initiate and propagate along the transverse rib root.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Thermo-mechanically strengthened 25G2S reinforcing steel of strength class At-IVS
2. Frommann K, Vlad CM. Mechanical and Technological Properties of TEMPRIMAR Weldable High Strength Rebars. In: 27th Mechanical working and steel processing conf. proc., vol. 23. Iron and Steel Society; 1986, p. 901–07.
3. Main trends in development of production and use of steel reinforcing bars
4. Modelling of microstructure and heat transfer during controlled cooling of low carbon wire rod10.2355/isijinternational.44.1217 ↗
5. Investigation of low cycle fatigue behavior of building structural steels under earthquake loading
6. Low-cycle behavior of reinforcing steel10.1061/(ASCE)0899-1561(1994)6:4(453) ↗
7. Tensile and low cycle fatigue behavior of corroded reinforcing steel bars S40010.1016/j.conbuildmat.2005.12.012 ↗
8. Mechanical behavior of corroded reinforcing steel bars S500s tempcore under low cycle fatigue10.1016/j.conbuildmat.2006.07.008 ↗
9. Low cycle and ratchetting fatigue behavior of high UTS/YS ratio reinforcing steel bars10.1007/s11665-013-0470-x ↗
10. Energy – based prediction of low-cycle fatigue life of BS 460B and BS B500B steel bars10.1016/j.matdes.2009.04.003 ↗
11. Low-cycle fatigue life behaviour of BS 460B and BS B500B steel reinforcing bars10.1111/j.1460-2695.2010.01452.x ↗
12. Experimental and constitutive model study of structural steel under cyclic loading10.1016/j.jcsr.2011.02.011 ↗
13. Experimental and modeling study of high-strength structural steel under cyclic loading10.1016/j.engstruct.2011.12.018 ↗
14. Steel Concrete and Composite Bridges, BS 5400. London: British Standards Institution; 1978.
15. Fatigue of steel reinforcement bars in concrete: a review10.1111/j.1460-2695.1979.tb01084.x ↗
16. Use of quality indices in comparison of corroded technical steel bars B500c and S500s on their mechanical performance basis10.1016/j.conbuildmat.2007.10.002 ↗
17. BS 4449: Steels for the reinforcement of the concrete – weldable reinforcing steels – bars, coil and decoiled product specification; 2005.
18. ASTM designation E 606-92. Standard practice for strain-controlled fatigue testing.
19. Apostolopoulos C, Matikas T, Kodjaspirov G, Diamantogiannis G, Apostolopoulos A. The role of MnS inclusion in structural integrity of steel bar under seismic loads. In: Proc of the 10th international conference on advanced metal materials and technologies (AMMT’13). Saint Petersburg, Russia; 25–29 June 2013, p. 495–01.
20. Anatomy of coupled constitutive models for ratcheting simulations10.1016/S0749-6419(99)00059-5 ↗
21. Simulation of cyclic plastic deformation response in SA333 C-Mn steel by a kinematic hardening model10.1016/j.commatsci.2010.02.037 ↗
22. On some modifications of kinematic hardening to improve the description of ratcheting effects10.1016/0749-6419(91)90050-9 ↗
23. On the calibration of the Chaboche hardening model and a modified hardening rule for uniaxial ratcheting prediction10.1016/j.ijsolstr.2009.04.002 ↗
24. Cyclic plastic deformation response at fatigue crack tips10.1016/j.ijpvp.2012.10.007 ↗
25. Stress concentration and fatigue of profiled reinforcing steels10.1016/S0142-1123(98)00051-6 ↗
26. Key issues in cyclic plastic deformation: experimentation10.1016/j.mechmat.2011.07.011 ↗
27. Uniaxial ratcheting and low-cycle fatigue failure behaviors of AZ91D magnesium alloy under cyclic tension deformation10.1016/j.jallcom.2011.03.129 ↗
28. Uniaxial ratcheting and fatigue failure behaviors of hot-rolled AZ31B magnesium alloy under asymmetrical cyclic stress-controlled loadings10.1016/j.msea.2013.03.004 ↗