Moisture induced length changes of tile adhesive mortars and their impact on adhesion strength
Source abstract
Abstract
Abstract The durability of tilings is affected by the size and type of ceramic tiles. We therefore performed a study on adhesion and shrinkage mechanisms of large-sized fully vitrified tiles (30 cm × 30 cm), which were applied on a concrete substrate using two different polymer-modified tile adhesive mortars (floor and wall application). The spatial distributions of adhesion strength and mortar hydration degree, as well as the length changes of the composite specimen were determined under various curing conditions. The deformations caused by wetting and drying events are restrained by the stiff tile. Thus, stresses result especially at the edges of the tile, which may cause micro-cracking at the interface of tile and mortar resulting in a reduction of adhesion strength.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Zurbriggen R, Pass K, Waser H, Wetzel A, Herwegh M, Harzer S, et al. Failure mechanisms of outdoor applied large sized fully-vitrified tiles. MEDMA Conference. Dubai, UAE 2008. p. 36–42.
2. Felixberger JK. Spannungen im Verbundsystem: Fliese – Verlegemörtel – Untergrund. In: Verein Deutscher Ingenieure VDI (editor), Jahrbuch 2005 Bautechnik. Düsseldorf (Germany): VDI – Verlag GmbH 2005. p. 359–90.
3. The study of adhesion failure of wall tiles10.1016/0360-1323(92)90047-S ↗
4. Factors affecting ceramic tile adhesion for external cladding10.1016/S0950-0618(99)00023-9 ↗
5. Ceramic tiling inspection system10.1016/j.conbuildmat.2008.02.007 ↗
6. Influence of workmanship on the bonding strength of tiles to external walls10.1016/S0143-7496(96)00019-X ↗
7. Kleine Teilchen mit großer Wirkung
8. Modelling of effects of shrinkage on the performance of adhesives
9. Changes in microstructures and physical properties of polymer-modified mortars during wet storage10.1016/j.cemconres.2005.06.001 ↗
10. X-ray absorption studies of drying of cementitious tile adhesive mortars10.1016/j.cemconcomp.2007.10.007 ↗
11. Wetzel A. Mechanisms of shrinkage and adhesion failure of tile adhesive mortar. PhD thesis, University of Berne (Switzerland); 2010.
12. Spatially resolved evolution of adhesion properties of large porcelain tiles10.1016/j.cemconcomp.2010.02.002 ↗
13. Carrà S, Collina A. Analysis of tile-adhesive-substrate system subject to shrinkage: The use of a predictive model to calculate the stress in different adhesives. In: Leopolder F, editor. Second American Drymix Mortar Conference admmc two. Chicago, IL, USA: drymix.info, Munich, Germany; 2010. p. 8–12.
14. The effect of chemical and mineralogical composition of aggregates on tensile adhesion strength of tiles10.1016/j.conbuildmat.2004.07.016 ↗
15. Weathering effects on external wall tiling systems10.1016/j.conbuildmat.2005.11.002 ↗
16. Experimental investigation of adhesion failure of the interface between concrete and polymer-cement mortar in an external wall tile structure under a thermal load10.1016/j.conbuildmat.2007.07.002 ↗
17. Influence of shrinkage and water transport mechanisms on microstructure and crack formation of tile adhesive mortars10.1016/j.cemconres.2011.07.007 ↗
18. Influence of water–cement ratio and cement content on the properties of polymer-modified mortars10.1016/S0008-8846(99)00060-5 ↗
19. Long-term performance of redispersible powders in mortars10.1016/S0008-8846(00)00498-1 ↗
20. Experimental study on polymer-modified mortars with silica fume applied to fix porcelain tile10.1016/j.buildenv.2006.07.002 ↗
21. Ohama · 1995
22. Development of polymer films by the coalescence of polymer particles in powdered and aqueous polymer-modified mortars10.1016/S0008-8846(02)01094-3 ↗
23. Quantitative microstructure analysis of polymer-modified mortars10.1046/j.1365-2818.2003.01230.x ↗
24. Influence of polymers on microstructure and adhesive strength of cementitious tile adhesive mortars10.1016/j.cemconres.2004.06.039 ↗
25. Polymer additives and their influence on the cement microstructure in the early stages of hardening
26. Effect of styrene-butadiene rubber latex on the chloride permeability and microstructure of Portland cement mortar10.1016/j.conbuildmat.2008.11.011 ↗
27. Scharlemann S, Baumann R, Pinnow M, Ganster J. Effect of performance additives on the microstructure of cement mortars. In: Leopolder F, editor. Second American Drymix Mortar Conference admmc two. Chicago, IL, USA: drymix.info, Munich, Germany; 2010. p. 54–61.
28. A process model for latex film formation: limiting regimes for individual driving forces10.1021/la9903090 ↗
29. Film formation and redispersion of waterborne latex coatings10.1006/jcis.1999.6645 ↗
30. SBR latex modified mortar rheology and mechanical behaviour10.1016/j.cemconres.2003.09.006 ↗
31. Function of styrene-acrylic ester copolymer latex in cement mortar10.1617/s11527-009-9501-3 ↗
32. Properties of latex blends and its modified cement mortars10.1016/S0008-8846(02)00813-X ↗
33. Mechanical behaviour of polymer modified mortars10.1016/j.msea.2004.03.049 ↗
34. The hydration of Portland and aluminous cements with added polymer dispersions10.1007/BF01130184 ↗
35. The influence of polymers on the hydration of portland cement phases analyzed by soft X-ray transmission microscopy10.1016/j.cemconres.2006.05.010 ↗
36. Study of polymer-cement composite containing Portland cement and aqueous poly (methyl methacrylate) latex polymer by Fourier-Transform Infrared (FT-IR) spectroscopy10.1080/10601320903004616 ↗
37. Influence of polymer on cement hydration in SBR-modified cement pastes10.1016/j.cemconres.2006.05.020 ↗
38. Solid state NMR and LVSEM studies on the hardening of latex modified tile mortar systems10.1016/j.cemconres.2004.10.003 ↗
39. Physico-chemical characterization of EVA-modified mortar and porcelain tiles interfaces10.1016/j.cemconres.2009.07.020 ↗
40. Bond strength and transversal deformation aging on cement-polymer adhesive mortar10.1016/j.conbuildmat.2008.05.019 ↗
41. Influence of low fractions of styrene/butyl acrylate polymer latexes on some properties of ordinary Portland cement mortars10.1002/mame.200600316 ↗
42. Chemical interaction between EVA and Portland cement hydration at early-age10.1016/j.conbuildmat.2009.06.033 ↗
43. Modification of cement mortars by polymer latex10.1002/(SICI)1097-4628(19970307)63:10<1251::AID-APP2>3.0.CO;2-J ↗
44. The influence of moisture on the deformability of cement-polymer adhesive mortar10.1016/j.conbuildmat.2010.12.004 ↗
45. Effects of a water-retaining agent on the rheological behaviour of a single-coat render mortar10.1016/j.cemconres.2006.02.018 ↗
46. Rheology and hardened properties of single-coat render mortars with different types of water retaining agents10.1016/j.conbuildmat.2008.06.001 ↗
47. Effect of HMEC on the consolidation of cement pastes: Isothermal calorimetry versus oscillatory rheometry10.1016/j.cemconres.2009.02.002 ↗
48. Controlling the application performance of cement renders with cellulose ethers
49. A pulsed field gradient and NMR imaging investigations of the water retention mechanism by cellulose ethers in mortars10.1016/j.cemconres.2010.04.001 ↗
50. Time-resolved monitoring of cement hydration: Influence of cellulose ethers on hydration kinetics10.1016/j.nimb.2005.06.026 ↗
51. Harzer S. Hydratations- und Feuchtegradienten von Klebemörteln. Diploma Thesis, Technische Universität Bergakademie Freiberg; 2008.
52. Adhesion between tile adhesive and modified rear sides of porcelain tiles
53. Österreichischer Fliesenverband (editor). Großformatige keramische Belagselemente sowie Belagselemente mit rektifizierten Kanten. Technische Merkblätter, Merkblatt 7. St. Pölten: Österreichischer Fliesenverband, p. 15–7.
54. Das Resonanzverfahren zur Messung mechanischer Schwingungen und Materialeigenschaften
55. Neuentwickeltes mechanisch-induziertes Setzdehnungsmessgerät an der EMPA Dübendorf
56. Knöfel · 1993
57. Kille · 2007
58. Moisture map by IR thermography10.1080/09500341003731597 ↗
59. Infrared thermography for moisture detection: A laboratory study and in-situ test
60. Review of NDT methods in the assessment of concrete and masonry structures10.1016/S0963-8695(00)00032-3 ↗
61. Knöfel D, Zurbriggen R, Stephan D. Influence of redispersible powders on shrinkage, hydration behaviour and microstructure of tile adhesives. Internal report. Elotex AG; 1998. 7 p.
62. Evaluation of calcium formate and sodium formate as accelerating admixtures for Portland-cement concrete
63. Quantitative distribution patterns of additives in self-leveling flooring compounds (underlayments) as function of application, formulation and climatic conditions10.1016/j.cemconres.2008.12.009 ↗
64. The ternary system Portland cement-calcium sulphoaluminate clinker-anhydrite: hydration mechanism and mortar properties10.1016/j.cemconcomp.2010.03.010 ↗
65. Influence of the calcium sulphate source on the hydration mechanism of Portland cement – calcium sulphoaluminate clinker – calcium sulphate binders10.1016/j.cemconcomp.2011.03.005 ↗
66. Overview and future trends of shrinkage research10.1617/s11527-006-9114-z ↗