Assessment of the digestion time of asphalt rubber binder based on microscopy analysis
Source abstract
Abstract
Abstract One of the most promising techniques for increasing the performance of pavement rehabilitation is the use of asphalt rubber mixtures, which utilize crumb rubber from used tires for modifying the asphalt to produce asphalt rubber binder. Crumb rubber can be produced by two different types of grinding, ambient and cryogenic. The asphalt rubber binder used in asphalt rubber mixtures can be obtained through two different processes, terminal blending (produced at a refinery) and continuous blending (produced in a plant). Because the performance of the asphalt rubber binder depends on the elastomeric properties of the crumb rubber, the manufacturing process, especially the digestion time, influences these properties. The digestion time is responsible for the interaction between the crumb rubber and the straight asphalt, which is characterized by the amount of elastomeric properties transferred to the straight asphalt. This paper presents an assessment of the digestion time using conventional performance-related tests and scanning electron microscopy analyses, which examined the surface of asphalt rubber binder. In this study, two straight asphalts with different penetrations and two crumb rubbers, an ambient crumb rubber and a cryogenic crumb rubber, were considered. The asphalt rubber binders studied in this work were produced using different contents of crumb rubber and different digestion times. The objective of this work is to contribute to the assessment of the digestion time of asphalt rubber binder based on microscopy analysis. This paper concluded that scanning electron microscopy is an important tool for defining the digestion time of asphalt rubber binder.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Epps JA, Galloway BM. First asphalt-rubber user-producer. Workshop Proceedings Summary, USA; 1980.
2. Epps JA. Uses of recycled rubber tyres in highways. NCHRP Synthesis of Highway Practice n°.198. Transportation Research Board, Washington, DC, USA; 1994.
3. Carlson DJ. Asphalt rubber sets the bar for modified binders. Rubber Pavements Association News. vol. 7, n° 1 summer, Tempe, Arizona; 2003.
4. Caltrans. Feasibility of recycling rubber modified paving materials. Caltrans, State of California Department of Transportation, Sacramento, California; 2005.
5. ADOT. ADOT construction manual. Arizona Department of Transportation, Intermodal Transportation Division, Arizona; 2005.
6. Austroads Pavement Research Group. The use of recycled crumb rubber. APRG technical note 10, Australia; 1999.
7. Caltrans. Asphalt rubber usage guide. State of California Department of Transportation. Materials and testing services, office of flexible pavement materials. Sacramento, California, USA; 2003.
8. Caltrans. Use of scrap tire rubber state of the technology and best practices. State of California Department of transportation materials engineering and testing services office of flexible pavement materials. Sacramento, Califórnia, USA; 2005.
9. CWC. Best practices in scrap tires & rubber recycling: ambient versus cryogenic grinding. Clean Washington Center, Seattle; 1998.
10. Neto SA, Farias MM, Pais JC, Pereira PAA. Influence of crumb rubber and digestion time on the asphalt rubber binders. Road Mater Pave Des. vol. 7, n° 2; 2006.10.1080/14680629.2006.9690030 ↗
11. Anderson J, Pampulim V, Saim R, Sousa JB. Asphalt rubber laboratory properties related to type and process technology of crumb rubber. In: Asphalt Rubber 2000 – Proceedings, Portugal; 2000.
12. Fontes · 2006
13. Fontes · 2006
14. Gallego · 2000
15. Visser AT, Verhaeghe B. Bitumen rubber: Lessons learned in South Africa. In: Asphalt rubber 2000 – proceedings, Portugal; 2000, p. 33–52.
16. Analysis of digestion time and the crumb rubber percentage in dry-process crumb rubber modified hot bituminous mixes10.1016/j.conbuildmat.2010.11.029 ↗
17. The mechanical performance of dry-process crumb rubber modified hot bituminous mixes: the influence of digestion time and crumb rubber percentage10.1016/j.conbuildmat.2011.06.046 ↗
18. Shatnawi S, Holleran G. Asphalt rubber maintenance treatments in California. Pavement maintenance specialists, Valley Slurry Seal Co., Sacramento; 2000.
19. Van Kirk J, Holleran G. Reduced thickness asphalt rubber concrete leads to cost effective pavement rehabilitation. In: 1st international conference world of pavements, Sydney; 2000.
20. Effect of crumb rubber characteristics on crumb rubber modified (CRM) binder viscosity10.1016/j.conbuildmat.2007.12.007 ↗
21. Interaction effects of crumb rubber modified asphalt binders10.1016/j.conbuildmat.2009.10.024 ↗
22. The influence of crumb rubber modifier (CRM) microstructures on the high temperature properties of CRM binders
23. Microstructure and performance of crumb rubber modified asphalt10.1016/j.conbuildmat.2009.06.038 ↗
24. Optimizing the improvements obtained by the digestion of comminuted scrap rubber in paving asphalts
25. Oliver · 2000
26. Neto SA, Farias MM, Pais JC, Pereira AA. Optimization of asphalt rubber hot mixes based on performance laboratory tests. In: Third international symposium on maintenance and rehabilitation of pavements and technological control, Guimaraes, Portugal; 2003.
27. Takallou HB, Takalou MB. Effects of mixing time and temperature on the visco-elastic properties of asphalt rubber binder. In: Asphalt rubber 2003 – proceedings, Brazil; 2003. p. 589–602.
28. The effect of crumb rubber modifier (CRM) on the performance properties of rubberized binders in HMA pavements10.1016/j.conbuildmat.2007.04.010 ↗
29. Gopal VT, Sebally P, Epps J. Effect of crumb rubber particle size and content on the low temperature rheological properties of binders. In: 81th annual meeting of the transportation research board, Washington, DC, USA; 2002.
30. Influences of crumb rubber size and type on reclaimed asphalt pavement (RAP) mixtures10.1016/j.conbuildmat.2008.05.002 ↗
31. Influence of surface area and size of crumb rubber on high temperature properties of crumb rubber modified binders10.1016/j.conbuildmat.2007.12.005 ↗
32. Influences of crumb rubber size and type on reclaimed asphalt pavement (RAP) mixtures10.1016/j.conbuildmat.2008.05.002 ↗
33. Neto · 2009
34. Using two-way ANOVA and hypothesis test in evaluating crumb rubber modification (CRM) agitation effects on rheological properties of bitumen10.1016/j.conbuildmat.2010.11.028 ↗
35. Sebaaly PE, Gopal V, Ardila-Coulson M. Impact of crumb rubber and sand on rheological properties of binders. In: Asphalt rubber 2000 – proceedings, Portugal; 2000. p. 371–82.
36. Kaloush K, Witczak MW, Way G. Performance evaluation of Arizona asphalt rubber mixtures using advanced dynamic material characterization tests. College of Engineering and Applied Sciences. Department of civil and environmental engineering, Arizona State University, USA; 2002.
37. The effect of crumb rubber modifier (CRM) on the performance properties of rubberized binders in HMA pavements10.1016/j.conbuildmat.2007.04.010 ↗
38. Mohammad LN, Huang B, Roberts F, Rasoulian M. Accelerated loading performance and laboratory characterization of crumb rubber asphalt pavements. In: Asphalt rubber 2000 – proceedings, Portugal; 2000. p. 189–220.
39. Huang P, Yan J. Research on the properties and technology of crumb rubber asphalt mixture. In: Asphalt rubber 2000 – proceedings, Portugal; 2000. p. 331–40.