journal article·2014-11

Asphalt modification using acid treated waste oil fly ash

M. Anwar Parvez, Hamad I. Al-Abdul Wahhab, Reyad A. Shawabkeh, Ibnelwaleed A. Hussein

Publisher page

Abstract

Abstract Oil fly ash (OFA) is generated in large quantities from power generation plants through combustion of fuel oil. Waste OFA contains more than 80% carbon and can be used to improve asphalt performance. H2SO4 and HNO3 acids were used to functionalize OFA with carboxylic group ( COOH) to improve its dispersion and chemical bonding with asphalt. Thermo gravimetric analysis (TGA), FTIR and combined SEM/EDS techniques were used to characterize as-received and treated OFA. Asphalt modification with treated OFA showed better results than that of untreated OFA. The treated OFA were blended with base asphalt and tested for rheological properties of pure and modified asphalt binders. OFA were used at 2–8% by weight of asphalt binder. Melt state rheology was investigated in ARES rheometer using temperature sweep, dynamic shear and steady shear rheological measurements. Incorporation of OFA COOH in the modified asphalt binders showed improvement in binder properties as investigated through steady and dynamic shear rheology. OFA COOH modification reduced temperature susceptibility of modified asphalt binder and increased the upper grading (performance) temperature. The rutting parameter G*/sin δ increased linearly with OFA COOH content of asphalt binder. Activation energy was found to decrease with OFA COOH content which indicated better resistance to low temperature cracking of the modified binder. Asphalt modification with treated OFA proved that acid treatment of OFA has enhanced the properties of asphalt mixes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Petroleum Processing and Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. American Coal Ash Association. Coal Combustion Product (CCP) Production & Use Survey Report; 2011.
2. Sinha A, Singh M, Singh S. Study of use of beneficiated pulverized coal fly-ash as filler and rice straw fibers in manufacturing of paper. In: Conference and Trade Show; 2010.
3. H2S removal from sour liquefied petroleum gas using Jordanian oil shale ash10.3176/oil.2007.2.02 ↗
4. Copper and zinc sorption by treated oil shale ash10.1016/j.seppur.2004.03.006 ↗
5. Graphitization of unburned carbon from oil-fired fly ash applied for anode materials of high power lithium ion batteries10.1016/j.matchemphys.2011.06.045 ↗
6. Effects of baghouse fines and mineral fillers on properties of asphalt mixes
7. Effect of Jordanian oil shale fly ash on asphalt mixes10.1061/(ASCE)0899-1561(2005)17:5(553) ↗
8. Kandhal · 1998
9. Evaluation of marble waste dust in the mixture of asphaltic concrete10.1016/j.conbuildmat.2005.12.001 ↗
10. Investigation of microstructures and ultraviolet aging properties of organo-montmorillonite/SBS modified bitumen10.1016/j.matchemphys.2011.04.078 ↗
11. Al-Methel M, Al-Abdul Wahhab HI, Hussein IA. Utilization of heavy oil fly ash to improve asphalt binder and asphalt concrete performance. Patent US 8062413 B1; 2011.
12. Rheological investigation of the influence of acrylate polymers on the modification of asphalt10.1002/app.24408 ↗
13. Influence of Mw of LDPE and vinyl acetate content of EVA on the rheology of polymer modified asphalt10.1007/s00397-005-0455-2 ↗
14. Rheology, mechanical and thermal properties of (C18-CNT/LDPE) nanocomposites10.3139/217.2587 ↗
15. Enhancement of surface properties of oil fly ash by chemical treatment10.1016/j.apsusc.2011.07.136 ↗
16. Coates · 2000
17. Effect of acid treatment multi-walled carbon nanotubes on the mechanical, permeability, thermal properties and thermo-oxidative stability of isotactic polypropylene10.1016/j.polymdegradstab.2008.01.033 ↗
18. Modification and functionalization of multiwalled carbon nanotube (MWCNT) via Fischer esterification
19. The Asphalt Institute · 2003
20. Development of performance-based bitumen specifications for the Gulf countries10.1016/S0950-0618(97)00002-0 ↗
21. Airy G. Factors affecting the rheology of polymer modified bitumen, polymer modified bitumen-properties and characterization. In: McNally T, editor. Woodhead Publishing in Materials; 2011.10.1533/9780857093721.2.238 ↗
22. Viscous properties and microstructure of recycled EVA modified bitumen10.1016/S0016-2361(03)00217-5 ↗
23. Dynamic mechanical characterization of asphalt concrete mixes with modified asphalt binders10.1016/j.msea.2011.05.008 ↗
24. Reactive hot melt polyurethane adhesives modified by acrylic copolymer nanocomposites10.1007/BF03218630 ↗
25. Rheological properties of styrene butadiene styrene polymer modified road bitumens10.1016/S0016-2361(03)00146-7 ↗
26. Enhancing the viscoelastic properties of bituminous binders via thiourea-modification10.1016/j.fuel.2012.03.012 ↗
27. Relation between polymer architecture and nonlinear viscoelastic behavior of modified asphalts10.1016/j.cocis.2006.09.001 ↗
28. Model-fitting the master curves of the dynamic shear rheometer data to extract a rut-controlling term for asphalt pavements10.1520/JTE12294J ↗
29. Bahia H, Zeng M, Zhai H, Khatr. Superpave protocols for modified asphalt binders. In: 15th Quarterly progress report for NCHRP project 9–10, National Cooperative Highway Research Program, Washington: DC; 1999.
30. Binard C, Anderson D, Lapalu L, Planche J. Zero shear viscosity of modified and unmodified binders. In: Proceedings of the 3rd Eurasphalt & Eurobitume Congress, Vienna; 2004.
31. Phillips · 1996