Closed form constitutive relationship for concrete filled FRP tubes under compression
Source abstract
Abstract
Abstract Fiber-reinforced polymer (FRP) tubes filled with concrete are very effective structural elements when loaded under axial stress. The exterior jacket of FRP, in fact, confines the inner concrete and significantly enhances both its resistance and stiffness. On the other hand FRP protects the inner core from temperature and humidity effects, and may also be used both as formwork and as reinforcement. Nonetheless, stability problems arise when FRP tubes are used as slender structural elements. Although the physical behavior of a straight structural element is simple, state-of-the-art models on one side do not deal explicitly with instability effects, on the other do not offer closed form solutions for the longitudinal constitutive relationship. Both aspects are solved and validated in this work. First a closed form constitutive relationship for concrete filled FRP tubes is developed. Departing from this solution, the critical load is computed in closed form. Secondly, the constitutive models for squat and slender tubes are validated against experimental results and compared with other state-of-the-art models. Design charts for FRP tubes under compression including buckling are obtained as a function of the most important variables and used to verify example elements. The proposed model shows a good capability of describing the behavior of FRP-concrete tubes, while being simple to use, expressed in a closed form and hence computationally fast.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Stress–strain curves of concrete confined by spiral reinforcement
2. Amer A, Arockiasamy M, Shahawy M. Ultimate strength of eccentrically loaded concrete columns reinforced with CFRP bars. In: Proceedings of the Conference on Advanced Composite in Bridges and Structures, Montreal, Canada, 1996. p. 209–16.
3. Daniali S, Paramanantham NS. Concrete columns reinforced with fiber reinforced plastic re-bars. In: Proceedings of the Third Material Engineering Conference, Infrastructure: new materials and methods of repair, ASCE, 1994. p. 567–75.
4. Engesser F. “Über statisch unbestimmte Träger bei beliebigen Formänderungs Gesetze und über den Satz von der Kleinsten Ergänzungsarbeit,” Zeitschrift des Architekten und Ingenieur-Vereins zu Hanover, vol. 35, 1889. pp. 733–44.
5. Confinement model for axially loaded concrete confined by circular fiber-reinforced polymer tubes
6. FRP-encased concrete as a structural material10.1680/macr.1982.34.121.191 ↗
7. Triaxial behavior of concrete
8. Hollaway · 2001
9. Kawaguchi N. Ultimate strength and deformation characteristics of concrete members reinforced with AFRP rods under combined axial tension or compression and bending. SP-138, ACI, 1993. p. 267–683.
10. Kawashima K, Hosotani M, Hoshikuma J. A model confinement effect for concrete cylinders confined by carbon fiber sheets. In: NCEER-INCEDE Workshop on Earthquake Engineering Frontiers in Transportation Facilities, NCEER, State University of New York, Buffalo, NY, 1997.
11. Knowles RB, Park R. Strength of concrete filled steel tubular columns. Journal of the Structural Division, Proceedings of the American Society of Civil Engineers, ST12, 1969. p. 2565–87.10.1061/JSDEAG.0002425 ↗
12. Kobayashi K, Fujisaki T. Compressive behavior of FRP reinforcement in non-prestressed concrete members. In: Proceedings of the Second International RILEM Symposium, Ghent, Belgium, 1995. p. 267–74.
13. Strength models for fiber-reinforced plastic-confined concrete10.1061/(ASCE)0733-9445(2002)128:5(612) ↗
14. Theoretical stress–strain model for confined concrete10.1061/(ASCE)0733-9445(1988)114:8(1804) ↗
15. Mastrapa JC. Effect of construction bond on confinement with fiber composites, MS thesis, University of Central Florida, Orlando, Fla., 1997.
16. Matthews · 1996
17. Mirmiran A. Hybrid fiber reinforced polymer (FRP)-concrete column. Final Report, Contract No. BA-519, Florida Dept. of Transportation, Tallahassee, University of Central Florida, Florida, 1999.
18. Microstructural aspects of the mechanical response of plain concrete
19. Park · 1975
20. Picher F. Confinement de cylinders en béton par des composites carbone-époxy unidirectionnels. MS thesis, University of Sherbrooke, Sherbrooke, Canada, 1995 (in French).
21. Picher F, Rochette P, Labossiere P. Confinement of concrete cylinders with CFRP. In: Saadatmanesh H, Ehsani, MR, editors. Proceedings of the First International Conference on Composites in Infrastructure, University of Arizona, Tucson, Ariz., 1996. pp. 829–41.
22. Model of concrete confined by fiber composite10.1061/(ASCE)0733-9445(1998)124:9(1025) ↗
23. Structural behaviour of short steel-concrete composite spun tubular columns10.1680/macr.2000.52.6.411 ↗
24. FRP-confined concrete model10.1061/(ASCE)1090-0268(1999)3:3(143) ↗
25. Teng · 2002