journal article·2007-03

The effect of thiosemicarbazide on corrosion resistance of steel reinforcement in concrete

A. Ali Gürten, Kadriye Kayakırılmaz, Mehmet Erbil

Publisher page

Abstract

Abstract This study describes a laboratory investigation of the influence of thiosemicarbazide (TSC) on the corrosion of reinforcing steel and the compressive strength of concrete. The effect of TSC on the corrosion resistance of steel reinforced concrete was evaluated by carrying out electrochemical tests in NaCl and NaCl + TSC solutions for 60 days. Polarisation resistance (Rp) values of TSC added reinforced concrete were much higher than those without TSC. Similarly, AC impedance spectra revealed that the resistance of TSC mixed electrodes were also quite higher than those without. The compressive strength of concrete specimens containing TSC was measured and an increase of 20–25% was observed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Synthetic concrete pore solution chemistry and rebar corrosion rate in the presence of chlorides10.1016/0008-8846(90)90097-H ↗
2. Rapid estimation of chloride diffusion coefficient in concrete10.1680/macr.1990.42.152.177 ↗
3. Using polymers to minimize corrosion of steel in concrete10.1016/S0958-9465(01)00032-4 ↗
4. In situ monitoring of the efficiency of the cathodic protection of reinforced concrete by electrochemical impedance spectroscopy10.1016/0013-4686(95)00475-0 ↗
5. Corrosion of reinforcing steel in concrete immersed in chloride solution and the effects of detergent additions on diffusion and concrete porosity
6. The application of electrochemical impedance spectroscopy to determine the long-term effectiveness of corrosion inhibitors for steel in concrete10.1016/S0958-9465(01)00062-2 ↗
7. Effect of inhibitors and admixted chloride on electrochemical corrosion behaviour of mild steel reinforcement in concrete10.5006/1.3315997 ↗
8. Effectiveness of corrosion inhibitors in contaminated concrete10.1016/S0958-9465(02)00084-7 ↗
9. Effect of admixtures in concrete on the corrosion resistance of steel reinforced in concrete10.1016/S0010-938X(99)00134-1 ↗
10. A study of corrosion inhibitors for concrete application10.1016/S0008-8846(00)00221-0 ↗
11. Thiosemicarbazide, phenyl isothiocyanate and their condensation product as corrosion inhibitors of copper in aqueous chloride solutions10.1016/S0254-0584(02)00513-8 ↗
12. Chemistry of corrosion inhibitors10.1016/S0958-9465(03)00037-4 ↗
13. The corrosion inhibition character of thiosemicarbazide and its derivatives for C-steel in hydrochloric acid solution10.1016/S0254-0584(00)00496-X ↗
14. Effects of urea on durability of reinforced concrete10.1680/macr.1993.45.164.179 ↗
15. Long-term effect of sulfate ions and associated cation type on chloride-induced reinforcement corrosion in Portland cement concretes10.1016/S0958-9465(01)00023-3 ↗
16. Effect of rebar cleanliness and repair materials on reinforcement corrosion and flexural strength of repaired concrete beams10.1016/S0958-9465(01)00034-8 ↗
17. Influence of mineral admixtures on the some properties and corrosion of steel embedded in sodium sulfate solution of concrete10.1016/S0167-577X(03)00039-9 ↗
18. Corrosion inhibition of reinforcing steel by using acrylic latex10.1016/S0008-8846(98)00048-9 ↗
19. Corrosion behaviour of rebars in fly ash mortar exposed to carbon dioxide and chlorides10.1016/S0958-9465(01)00025-7 ↗
20. A migrating corrosion inhibitor evaluated in concrete containing various contents of admixed chlorides10.1016/S0008-8846(01)00669-X ↗
21. Corrosion measurements of steel reinforcement in concrete exposed to a tropical marine atmosphere10.1016/S0008-8846(01)00713-X ↗
22. Synergistic effect of corrosion inhibitor and inorganic coating on reinforcement corrosion10.1108/00035590110384092 ↗
23. Corrosion of reinforcements in artificial seawater and concentrated sulphate solution10.1016/0008-8846(90)90077-B ↗
24. Corrosion of reinforcing steel evaluated by means of concrete resistivity measurements10.1016/S0010-938X(01)00033-6 ↗
25. ASTM C876-91, Standard test method for half-cell potentials of uncoated reinforcing steel in concrete, vol. 4.02. Annual Book of ASTM Standards, Philadelphia, USA, 1991.
26. Effect of steel manufacturing process and atmospheric corrosion on the corrosion resistance of steel bars in concrete10.1016/S0958-9465(01)00035-X ↗
27. Correlation between corrosion potential and polarization resistance of rebar in concrete10.1016/0167-577X(96)00099-7 ↗
28. Electrochemical evaluation of the performance of corrosion-inhibiting systems in concrete bridges10.1016/S0958-9465(03)00041-6 ↗
29. Tüken T, Yazıcı B, Erbil M. An investigation on natural occurring corrosion inhibitors. In: Proceeding of the ninth European symposium on corrosion inhibitors (9 SEIC), vol. 11. 2000. p. 115–26.
30. Corrosion rate measurement by alternating current (AC) impedance method
31. The effect of relative humidity on the atmospheric corrosion of defective organic coatings materials: an EIS study with a new approach10.1016/S0010-938X(99)00126-2 ↗
32. Effect of polyvinylpyrrolidone on the corrosion resistance steel10.1016/j.cemconcomp.2005.03.002 ↗