journal article·2015-12

Effect of curing compounds on the properties and microstructure of cement concretes

Bin Xue, Jianzhong Pei, Yanping Sheng, Rui Li

Publisher page

Abstract

Abstract With the aim of specifying the type of curing compound for water-scarce areas, four types of curing compound (acrylic-based, paraffin-based, silicate-based and composite-based) were chosen to investigate the effect of curing compound on the mechanical property, durability and microstructure of cement concretes. The effect was assessed by measuring compressive and flexural strength, drying shrinkage, impermeability and crack resistance. The results indicated that curing compounds were effective in increasing the compressive, flexural strength and the impermeability of concretes, and decreasing the drying shrinkage and cracks. In general, the composite-based and the acrylic-based curing compound performed better than the paraffin-based and the silicate-based curing compound. At the same time, microstructure test results showed that curing compound promoted the hydration of the cement to form a compact and homogenous microstructure, and AFt crystalline particles were rod-like with a larger size.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Properties and Behavior · Concrete and Cement Materials Research · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. ACI Committee 308, Guide to curing concrete (ACI 308R-01), American Concrete Institute, Farmington Hills, 2001.
2. T.S. Poole, Structures laboratory ERDC. Guide for curing of Portland cement concrete pavements, vol. II. Federal Highway Administration, Report No. FHWA-HRT-05-038, 2006.
3. Effect of environmental conditions on the properties of fresh and hardened concrete10.1016/S0958-9465(01)00007-5 ↗
4. Experimental study of early-age behavior of high performance concrete deck slabs under different curing methods10.1016/j.conbuildmat.2005.04.001 ↗
5. Effect of curing methods on strength and durability of concrete under hot weather conditions
6. New performance-based approach to ensure quality curing during construction10.1061/(ASCE)MT.1943-5533.0000068 ↗
7. Evaluation of pavement curing effectiveness and curing effects on concrete properties10.1061/(ASCE)0899-1561(2006)18:3(377) ↗
8. The durability characteristics of high performance concrete: a review10.1016/S0958-9465(02)00081-1 ↗
9. Effect of curing methods on the properties of plain and blended cement concretes10.1016/j.conbuildmat.2009.08.036 ↗
10. Improvements of curing operations for Portland cement concrete pavement10.1016/j.conbuildmat.2012.04.065 ↗
11. Effect of curing conditions on the service life design of RC structures in the Persian Gulf Region10.1061/(ASCE)0899-1561(2008)20:1(2) ↗
12. Effect of mixture composition and initial curing conditions on scaling resistance of ternary (OPC/FA/SF) concrete10.1061/(ASCE)0899-1561(2008)20:10(668) ↗
13. The effects of various curing materials on the compressive strength characteristic of the concretes produced with multiple chemical admixtures10.1016/j.scient.2011.11.038 ↗
14. Influence of key parameters on drying shrinkage of cementitious materials10.1016/S0008-8846(99)00156-8 ↗
15. Effect of curing on durability
16. The influence of curing conditions on the permeability and durability of concrete. Results from a field exposure test10.1016/0008-8846(93)90019-6 ↗
17. Predicting Ca(OH)2 content and chemical shrinkage of hydrating cement pastes using analytical approach10.1016/j.cemconres.2003.07.006 ↗
18. Research approaches of cement hydration degree and their development
19. Effect of curing conditions on the service life design of RC structures in the Persian Gulf Region
20. The nature of C–S–H in hardened cements10.1016/S0008-8846(99)00168-4 ↗