journal article·2016-03Open access

Assessment of microstructure, physical and thermal properties of bitumen modified with LDPE/GTR/elastomer ternary blends

Krzysztof Formela, Michał Sulkowski, Mohammad Reza Saeb, Xavier Colom, Józef T. Haponiuk

Abstract

LDPE/GTR/elastomer ternary blends with variable LDPE/GTR ratio and constant elastomer content were prepared via melt-compounding. Obtained LDPE/GTR/elastomer blends were applied as thermoplastic modifiers into bitumen. Microstructure, physical and thermal properties of the modified bitumen were determined. It was observed that chemical composition of LDPE/GTR/elastomer blends has significant influence on their density and rheological behavior, which are also main factors affecting the dispersion of LDPE/GTR/elastomer blends into bitumen matrix and interfacial interactions between used components. Microstructure and thermal behavior of modified bitumen confirmed that physical interactions between bitumen and LDPE/GTR/elastomer blends are limited with increasing content of GTR. This phenomenon is due to mainly cross-linked structure of GTR and its low flowability. The conducted investigations showed that interfacial interactions between of thermoplastic modifier and bitumen, therefore the conventional and thermal properties of modified bitumen can be improved and easily modified by changing composition of LDPE/GTR/elastomer blends
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Selected methods of utilization of used tires10.14314/polimery.2012.656 ↗
2. Improvement of the properties of natural rubber/ground tire rubber composites through biological desulfurization of GTR10.1007/s10965-012-9864-y ↗
3. Curing characteristics, mechanical properties and morphology of butyl rubber filled with ground tire rubber (GTR)10.1007/s13726-013-0214-7 ↗
4. Acoustic and mechanical properties of recycled polyvinyl chloride/ground tyre rubber composites10.1177/0021998313482154 ↗
5. Effect of compounding conditions on static and dynamic mechanical properties of high density polyethylene/ground tire rubber blends10.3139/217.2849 ↗
6. Degradation behavior of maleated polyethylene/ground tire rubber thermoplastic elastomers with and without stabilizers10.1016/j.polymdegradstab.2013.08.017 ↗
7. Thermoplastic elastomers based on high-density polyethylene, ethylene–propylene-diene terpolymer, and ground tire rubber dynamically vulcanized with dicumyl peroxide10.1002/app.39901 ↗
8. Thermogravimetric analysis of composites obtained from polyurethane and rubber waste10.1080/15421406.2012.635907 ↗
9. Non-isothermal curing kinetics of epoxy/mechanochemical devulcanized ground rubber tire (GRT) composites10.1007/s00289-013-0926-z ↗
10. Liquefaction of waste tires by pyrolysis for oil and chemicals–a review10.1016/j.jaap.2013.02.016 ↗
11. Effects of shear stress and subcritical water on devulcanization of styrene–butadiene rubber based ground tire rubber in a twin-screw extruder10.1002/app.39253 ↗
12. Continuous devulcanization of waste tires by using a co-rotating twin screw extruder: effects of screw configuration, temperature profile, and devulcanization agent concentration10.1002/vnl.20322 ↗
13. Improvement of the properties of plasma-modified ground tire rubber-filled cement paste10.1002/app.36907 ↗
14. Investigations on cementitious composites based on rubber particle waste additions10.1590/S1516-14392012005000177 ↗
15. Method for producing rubber powder modified asphalt and product of continuous asphalt modification
16. Crumb rubber in cold recycled bituminous mixes: comparison between traditional crumb rubber and cryogenic crumb rubber10.1016/j.conbuildmat.2014.06.093 ↗
17. Utilization of thermoplastic polymer waste in blends with petroleum bitumen fractions10.14314/polimery.2010.773 ↗
18. Novel recycled polyethylene/ground tire rubber/bitumen blends for use in roofing applications: thermo-mechanical properties10.1016/j.polymertesting.2010.03.010 ↗
19. Pavement properties of asphalt modified with packaging-waste polyethylene10.1002/vnl.21328 ↗
20. Recycled tyre rubber modified bitumens for road asphalt mixtures: a literature review10.1016/j.conbuildmat.2013.09.007 ↗
21. Recycling of waste tire rubber in asphalt and portland cement concrete: an overview10.1016/j.conbuildmat.2013.11.027 ↗
22. Effect of activated crumb rubber on the properties of crumb rubber-modified bitumen10.1002/app.38991 ↗
23. Crumb rubber-modified asphalt: microwave treatment effects10.1080/10916460903394102 ↗
24. Improving the rheological properties of crumb rubber modified binder using hydrogen peroxide10.1080/14680629.2013.812535 ↗
25. Thermomechanical properties of bitumen modified with crumb tire rubber and polymeric additives10.1016/j.fuproc.2010.03.009 ↗
26. Investigation of the rheological modification mechanism of warm-mix additives on crumb-rubber-modified asphalt10.1061/(ASCE)MT.1943-5533.0000808 ↗
27. Crumb tire rubber and polyethylene mutually stabilized in asphalt by screw extrusion10.1002/app.41189 ↗
28. Asphalt modified by thermoplastic elastomer based on recycled rubber10.1016/j.conbuildmat.2015.06.047 ↗
29. Rheological properties of asphalts modified by waste tire rubber and reclaimed low density polyethylene10.1016/j.conbuildmat.2015.02.092 ↗
30. Effects of high shear stress on the devulcanization of ground tire rubber in a twin-screw extruder10.1002/app.38170 ↗
31. Thermomechanical reclaiming of ground tire rubber via extrusion at low temperature: efficiency and limits
32. The use of waxes and wetting additives to improve compatibility between HDPE and ground tyre rubber10.1177/0021998309351602 ↗
33. Extrusion and testing the changes of recyclat PE-LD properties
34. Interfacially modified LDPE/GTR composites with non-polar elastomers: from microstructure to macro-behavior10.1016/j.polymertesting.2015.01.003 ↗
35. Rheological studies of highly-filled polyolefin composites taking into consideration p-V-T characteristics10.14314/polimery.2010.379 ↗
36. Read · 2003
37. Rheological properties of ground rubber tire filled isotactic polypropylenes of different molecular weight characteristics10.1177/0731684412449700 ↗
38. Rheological properties of ground tyre rubber based thermoplastic elastomeric blends10.1016/j.polymertesting.2015.05.006 ↗
39. Evaluation of the improved properties of SBR/weathered coal modified bitumen containing carbon black10.1016/j.conbuildmat.2008.12.020 ↗
40. Visakh · 2013
41. Characterization and properties of LDPE/(ground tire rubber)/crosslinked butyl rubber blends10.1002/vnl.21363 ↗
42. Thermoplastic elastomers based on high-density polyethylene and waste ground rubber tire composites compatibilized by styrene–butadiene block copolymer10.1177/0892705712473628 ↗
43. Rheological aspects of the rejuvenation of aged bitumen10.1007/s00397-005-0078-7 ↗
44. Dynamic viscoelastic characterization of bitumen/polymer roofing membranes10.1002/mame.200700022 ↗
45. Rheology of asphalt and styrene–butadiene blends10.1007/s10853-010-4230-0 ↗
46. Blends of bitumen with polyethylenes10.1016/S0032-3861(98)00779-4 ↗
47. Polyethylene dispersions in bitumen: the effects of the polymer structural parameters10.1002/app.12942 ↗
48. Characterization of the properties of thermoplastic elastomers containing waste rubber tire powder10.1016/j.wasman.2008.10.004 ↗
49. Investigation of volatile low molecular weight compounds formed during continuous reclaiming of ground tire rubber10.1016/j.polymdegradstab.2015.05.007 ↗
50. Molecular interactions between rubber and asphalt10.1021/ie050905r ↗
51. Composition analysis of crumb rubber during interaction with asphalt and effect on properties of binder10.1080/10298436.2012.721548 ↗