The influence of bagasse fibre and fly ash on the long-term properties of green cementitious composites
Source abstract
Abstract
Abstract Both the long-term physical and mechanical properties of new green cementitious composites reinforced with bagasse fibre and steel fibre with ultra high volume of fly ash are investigated in this paper. Newly cast specimens were cured in the lab for the first 28 days, then these specimens were moved outside to be cured in weather conditions for up to 10 months. The physical properties (including bulk density, apparent porosity and water absorption), mechanical properties (such as compressive strength, Young’s modulus and modulus of rupture) are investigated experimentally at the age of 28 days, 3 months, 6 months and 10 months. SEM tests are also conducted to study the microstructure of the new composites. Through comparison with the mechanical behaviour of the composites at the age of 28 days, the long-term effect on the physical and mechanical properties of the composites are discussed, and the impact of fly ash content and bagasse fibre content on the composites under the weathering conditions are also analysed. The experimental results show that the compressive strength, Young’s modulus, modulus of rupture and tensile strength of the composites decrease with the reduction of the content of fly ash and bagasse fibre, but bending toughness of the material increases with fly ash content and peaks as fly ash to cement ratio achieves 2.0. The mechanical properties of the new composites are found to be comparable to those of conventional concrete and they are very promising green and sustainable construction and building materials for the next generation infrastructures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Bagasse-Reinforced Cement Composites10.1016/0958-9465(95)00008-Z ↗
2. Air-cured Abaca reinforced cement composites10.1016/0262-5075(87)90021-2 ↗
3. Mechanical behavior of cement-based materials reinforced with sisal fibers10.1007/s10853-006-0218-1 ↗
4. Cellulose modified fibres in cement based composites10.1016/j.compositesa.2009.09.016 ↗
5. Performance and durability of cement based composites reinforced with refined sisal pulp10.1080/10426910601062065 ↗
6. Recent development in chemical modification and characterization of natural fibre-reinforced composites10.1002/pc.20461 ↗
7. Effect of fiber surface treatment on the fiber-matrix bond strength of natural fiber reinforced composites10.1016/S1359-8368(98)00054-7 ↗
8. Statistical evaluation of long-term durability characteristics of cellulose fiber-reinforced cement composites
9. Development of vegetable fibre-mortaar composites of improved durability10.1016/S0958-9465(02)00018-5 ↗
10. H.E. Gram, “Durability of Natural Fibers in Concrete”. Swedish cement and concrete research institute, 1983.
11. Effect of calcium rich and alkaline solutions on the chemical behaviour of hemp fibres10.1007/s10853-007-1903-4 ↗
12. Improving degradation resistance of sisal fiber in concrete through fibre surface treatment10.1016/j.apsusc.2013.11.024 ↗
13. J. Gassan, A.K. Bledzki, “Correlation between structure and properties of cellulose-based fibers and their effects on composite properties”, Fifth International Conference on Woodfiber-Plastic Composites, pp. 147–152, 1999.
14. Physical and mechanical properties of durable sisal fiber–cement composites10.1016/j.conbuildmat.2009.10.030 ↗
15. Sisal pulp reinforced cement mortar10.1016/0958-9465(92)90035-T ↗
16. Eucalyptus pulp fibres as alternative reinforcement to engineered cement-based composites10.1016/j.indcrop.2009.10.009 ↗
17. Chemically and thermally treated vegetable fibers for reinforcement of cement-based composites10.1080/10426910601063386 ↗
18. Treatment of non-wood plant fibres used as reinforcement in composites materials10.1590/S1516-14392013005000084 ↗
19. Savastano · 2001
20. Potential of alternative fibre cements as building materials for developing areas10.1016/S0958-9465(02)00071-9 ↗
21. Fracture and fatigue of natural fiber-reinforced cementitious composites10.1016/j.cemconcomp.2009.02.006 ↗
22. Special issue on inorganic-bonded fiber composites10.1016/j.conbuildmat.2009.08.035 ↗
23. The hornification of vegetable fibres to improve the durability of cement mortar composites10.1016/j.cemconcomp.2011.03.003 ↗
24. Modification of cellulose fibres with organosilanes: under what condition does coupling occur?10.1016/j.jcis.2003.09.044 ↗
25. Modification of cellulose fibers with functionalized silanes: effect of fiber treatment on the mechanical performance of cellulose–thermoset composites10.1002/app.22133 ↗
26. Weathering of vegetable fibre-clinker free cement composites10.1007/BF02482092 ↗
27. Development on vegetable fibre-cement based materials in Sao Paulo, Brazil: an overview10.1016/j.cemconcomp.2004.09.004 ↗
28. Use of high volumes of fly ash to improve ECC mechanical properties and material greenness
29. P.K. Mehta, High-performance, high-volume fly ash concrete for sustainable development, in International Workshop on Sustainable Development and Concrete Technology, University of California, Berkeley, USA, 2004.
30. Sugar cane bagasse fibre reinforced cement composites. Part1. Influence of the botanical components of bagasse on the setting of bagasse/cement composite10.1016/S0958-9465(02)00003-3 ↗
31. Silane treatment of bagasse fiber for reinforcement of cementitious composites10.1016/j.compositesa.2008.05.013 ↗
32. Mechanical behaviours of green hybrid fibre-reinforced cementitious composites10.1016/j.conbuildmat.2015.07.143 ↗
33. Tensile strain hardening behaviour of hybrid steel-polyethylene fibre reinforced cementitious composites10.1016/j.conbuildmat.2008.01.009 ↗
34. ASTM C 948–81, “Standard test method for dry and wet bulk density, water absorption, and apparent porosity of thin section of glass-fiber reinforced concrete”, 2009.
35. ASTM C39, “Standard test method for compressive strength of cylindrical concrete specimens”, Annual Book of ASTM Standards, vol. 4, no. 2, pp. 19, 1988.
36. ASTM C78, “Test method for flexural strength of concrete using simple beam with third-point loading”, Annual Book of ASTM Standards, vol. 4, no. 2, pp. 31, 1988.
37. Hybrid reinforcement of sisal and polypropylene fibers in cement-based composites10.1061/(ASCE)MT.1943-5533.0000152 ↗
38. Performance characteristics of high-volume class F fly ash concrete10.1016/j.cemconres.2003.09.002 ↗