Superpave evaluation of higher RAP contents using WMA technologies
Source abstract
Abstract
Abstract In this study, the objective was to conduct an investigation of Superpave mix design characteristics of WMA technologies in terms of various high percentages of reclaimed asphalt pavements (RAPs). One PG 58-28 binder, two PG 64-22 binders, and two RAP sources were selected from South Carolina. In addition, three mix technologies (e.g. hot mix asphalt (HMA), foaming technology, and Evotherm additive) were employed to produce the mixtures. Meanwhile, four RAP contents of 20%, 30%, 40%, and 50% (by weight of total mixture) were utilized to blend with virgin materials. 36 Superpave mix designs were conducted to explore the volumetric characteristics of various mixtures. In this study, the results indicated that, all mixtures have an optimum asphalt content (OAC) less than 5.0%, and most of these values are close to a minimum OAC value of 4.5% set by South Carolina Department of Transportation (SCDOT). No noticeable increases at the mixing and compaction temperatures for these mixtures containing a higher percentage of RAP (i.e., over 40%) were found in this study. In addition, the voids in mineral aggregate (VMA), voids filled with asphalt (VFA), dust/asphalt ratios, and moisture susceptibility meet the requirements of SCDOT’s specifications. Therefore, these specific mix designs could be used as the guidelines for developing a set of specifications for a higher percentage of RAP in terms of warm mix asphalt technology.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Evaluation of potential processes for use in warm mix asphalt
2. Hurley · 2006
3. Mallick · 2007
4. Laboratory investigation of moisture damage in warm-mix asphalt containing moist aggregate10.3141/2126-14 ↗
5. Influence of anti-stripping additive on moisture susceptibility of warm mix asphalt mixture10.1061/(ASCE)MT.1943-5533.0000111 ↗
6. Improved resistance of long term aged warm mix asphalt to moisture damage containing moist aggregates10.1061/(ASCE)MT.1943-5533.0000567 ↗
7. Wielinski · 2009
8. Investigation of Foamed Asphalt (Warm Mix Asphalt) with High Reclaimed Asphalt Pavement (RAP) Content for Sustainment and Rehabilitation of Asphalt Pavement
9. Field and Laboratory Investigation of Foamed Asphalt (Warm-Mix Asphalt) with High Recycled Asphalt Pavement Content for Sustainment and Rehabilitation of Asphalt Pavement
10. Evaluation of warm-mix asphalt produced with the double barrel green process10.3141/2126-03 ↗
11. Effect of compaction temperature on rutting and moisture resistances of foamed warm mix asphalt mixtures10.1061/(ASCE)MT.1943-5533.0000664 ↗
12. National Cooperative Highway Research Program (NCHRP) · 2001
13. Federal Highway Administration (FHWA) · 1997
14. Mechanical property characterization of warm-mix asphalt prepared with chemical additives10.1061/(ASCE)MT.1943-5533.0000810 ↗
15. Mallick · 2008
16. Laboratory investigation of mixing hot-mix asphalt with reclaimed asphalt pavement10.1177/0361198105192900105 ↗
17. Laboratory performance evaluation of warm-mix asphalt containing high percentages of reclaimed asphalt pavement10.3141/2294-11 ↗