journal article·2016-06

White Ordinary Portland Cement blended with superfine steel dust with high zinc oxide contents

Henry A. Colorado, Edwin Garcia, M.F. Buchely

Publisher page

Abstract

Abstract The addition of steel waste in the form of slags and dust to cement is beneficial to the environment because waste can be immobilized, and thus, decreasing the waters contamination. In this paper, paste and mortar-based Portland cement samples with up to 70.0 wt% of steel dust were investigated. Since it is known that for one ton of Portland cement fabricated 900 kg of CO 2 are emitted to the environment, the addition of steel waste to cement is very beneficial. Moreover, since steel dust reduces the amount of needed cement in concrete, it reduces the final cost of concrete significantly. Additionally, the manufacturing processing was conducted entirely at room temperature; therefore, the negative impact of cement in the environment is reduced. Scanning electron microscopy and X-ray diffraction characterization were conducted in order to investigate the microstructure of the samples. In addition, compression, density, and flow table tests were done over all samples. Thermo-gravimetric tests were performed to analyze the waste thermal stability. The effect of the potential hazardous components of this waste in water was analyzed through leachability tests. For all samples, compressive strength ranged from 73 to 2.5 MPa. The lowest strength value corresponded to 70 wt% of waste. Results show a solution for using this waste as admixture in cements and concrete, and therefore as a method for reducing cement paste in buildings and infrastructure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Policy: sustainable development goals for people and planet10.1038/495305a ↗
2. Study on steel furnace slags with high MgO as additive in Portland cement10.1016/S0008-8846(02)00763-9 ↗
3. Chemical, mineralogical, and morphological properties of steel slag
4. Structural characteristics and hydration kinetics of modified steel slag10.1016/j.cemconres.2010.11.018 ↗
5. Utilization of steel slag for Portland cement clinker production10.1016/j.jhazmat.2007.07.093 ↗
6. Utilization of steel slag as aggregates for stone mastic asphalt (SMA) mixtures10.1016/j.buildenv.2006.06.008 ↗
7. Evaluation of steel slag coarse aggregate in hot mix asphalt concrete10.1016/j.jhazmat.2008.09.105 ↗
8. Phosphate removal from solution using steel slag through magnetic separation10.1016/j.jhazmat.2007.06.103 ↗
9. Phosphorus removal by electric arc furnace steel slag and serpentinite10.1016/j.watres.2006.02.001 ↗
10. Effect of electric arc furnace dust (EAFD) on properties of asphalt cement mixture10.1016/j.resconrec.2012.10.003 ↗
11. SEM analysis on electron arc furnace dust (EAFD) and EAFD-asphalt mixture
12. Use of low CaO unprocessed steel slag in concrete as fine aggregate10.1016/j.conbuildmat.2008.06.003 ↗
13. An overview of utilization of steel slag10.1016/j.proenv.2012.10.108 ↗
14. Effects of BOF steel slag and other cementitious materials on the rheological properties of self-compacting cement pastes10.1016/j.conbuildmat.2012.11.039 ↗
15. The performance of steel-making slag concretes in the hardened state10.1016/j.matdes.2014.04.030 ↗
16. Steel furnace slag aggregate expansion and hardened concrete properties10.1016/j.cemconcomp.2015.04.006 ↗
17. Electric arc furnace slag and its use in hydraulic concrete10.1016/j.conbuildmat.2015.05.003 ↗
18. Use of iron and steel industry by-product (GGBS) in cement paste and mortar10.1016/j.resconrec.2012.09.002 ↗
19. Properties of green concrete containing stainless steel oxidizing slag resource materials10.1016/j.conbuildmat.2013.09.017 ↗
20. The use of steel slag aggregate to enhance the mechanical properties of recycled aggregate concrete and retain the environment10.1016/j.conbuildmat.2013.12.063 ↗
21. Utilization of carbonated and granulated steel slag aggregate in concrete10.1016/j.conbuildmat.2015.03.008 ↗
22. Influence of steel slag on mechanical properties and durability of concrete10.1016/j.conbuildmat.2013.06.044 ↗
23. Properties of concrete manufactured using steel slag10.1016/j.proeng.2014.12.229 ↗
24. Properties and hydration of blended cements with steelmaking slag10.1016/j.cemconres.2007.03.008 ↗
25. K061 · 1983
26. Chemical, physical, structural and morphological characterization of the electric arc furnace dust10.1016/j.jhazmat.2006.01.044 ↗
27. Dust formation in electric arc furnace: birth of the particles10.1016/j.powtec.2005.05.006 ↗
28. ‘Ecological bricks’ made with clays and steel dust pollutants10.1016/S0169-1317(96)00020-8 ↗
29. Preliminary investigation on the pozzolanic activity of superfine steel slag10.1016/j.conbuildmat.2015.02.062 ↗
30. Cementitious properties of super-fine steel slag10.1016/j.powtec.2013.04.016 ↗
31. Environmental impact assessment in Colombia: critical analysis and proposals for improvement10.1016/j.eiar.2009.09.001 ↗
32. High-sodium waste streams stabilized with inorganic acid–base phosphate ceramics fabricated at room temperature10.1016/j.ceramint.2014.03.045 ↗
33. Pultruded glass fiber-and pultruded carbon fiber-reinforced chemically bonded phosphate ceramics
34. Inorganic phosphate cement fabricated with wollastonite, barium titanate, and phosphoric acid10.1016/j.cemconcomp.2015.04.014 ↗
35. Performance of steel slag and steel sludge in concrete10.1016/j.conbuildmat.2015.12.008 ↗
36. ASTM C778-13: Standard specification for standard sand, 2013.
37. ASTM C230/CM230M-14: Standard specification for flow table for use in tests of hydraulic cement, 2014.
38. ASTM C109/C109M-13: Standard test method for compressive strength of hydraulic cement mortars (Using 2-in. or 50-mm Cube Specimens), 2013.
39. Rice · 2012
40. Magnesium ferrite (MgFe2O4) nanostructures fabricated by electrospinning10.1007/s11671-008-9229-y ↗
41. U.S. Environmental Protection Agency (EPA) · 1993
42. Ladle metallurgy stainless steel slag as a raw material in Ordinary Portland Cement production: a possibility for industrial symbiosis10.1016/j.jclepro.2015.06.006 ↗
43. International Stainless Steel Forum, www.worldstainless.org/news/show/440, 2012, (accessed July 2015).
44. U.S. Geology Survey · 2013
45. Comparison of the retarding mechanisms of zinc oxide and sucrose on cement hydration and interactions with supplementary cementitious materials10.1016/j.cemconres.2015.02.023 ↗
46. Hydration study of ordinary Portland cement in the presence of zinc ions10.1590/S1516-14392007000400002 ↗
47. Zinc oxide in Portland cement. Part II: hydration, strength gain and hydrate mineralogy10.1680/adcr.2000.12.4.173 ↗
48. Effect of addition of nano-magnetite on the hydration characteristics of hardened Portland cement and high slag cement pastes10.1007/s10973-012-2663-1 ↗
49. Study of the hydration of Portland cement blended with blast-furnace slag by calorimetry and thermogravimetry10.1007/s10973-010-0841-6 ↗
50. Particle surface engineering effect on the mechanical, optical and photoluminescent properties of ZnO/vinyl-ester resin nanocomposites10.1039/B613286C ↗