journal article·2016-07

Internal heat liberation and strength development of self-cured geopolymers in ambient curing conditions

Teewara Suwan, Mizi Fan, Nuhu Braimah

Publisher page

Abstract

Abstract Curing geopolymers with a temperature around 40–90 °C can significantly improve the mechanical properties and mechanisms of reaction. There is a challenge to develop GP with its abilities of curing in ambient temperature (22 ± 2 °C) without external source of heat supply for on-site practices. This study is extended from the previous research work on the influence of OPC inclusion and manufacturing process. The main aim is to study and evaluate the effects of additional OPC (GeoPC system) and manufacturing procedures on accumulated-internal heat liberation and strength development of low calcium fly ash-based geopolymer paste. The results showed that the GeoPC compounds and manufacturing procedures were closely related to the curing process, internal heat, microstructure development and hence properties of the end products. Both optimum GeoPC mixtures and new-introduced mixing method (pre dry-mixing) have been generated, providing clear potential and basis of the development of self-cured geopolymers to achieve the mechanical strength and for on-site construction under ambient conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Introduction: sustainable development and concrete technology
2. Polymerization in sodium silicate solutions: a fundamental process in geopolymerization technology10.1007/s10853-009-3497-5 ↗
3. Effect of types of curing on strength of geopolymer concrete
4. Geopolymer concrete: a green concrete
5. Coal fly ash as raw material for the manufacture of geopolymer-based products10.1016/j.wasman.2007.02.001 ↗
6. Alkali-activated binders: a review Part 1. Historical background, terminology, reaction mechanisms and hydration products10.1016/j.conbuildmat.2007.10.015 ↗
7. Glukhovsky · 1967
8. 2011
9. A review: the comparison between alkali-activated slag (Si+Ca) and metakaolin (Si+Al) cements10.1016/j.cemconres.2010.03.020 ↗
10. Influence of curing conditions on properties of high calcium fly ash geopolymer containing Portland cement as additive10.1016/j.matdes.2013.07.018 ↗
11. Opc-fly ash cementitious systems: study of gel binders produced during alkaline hydration10.1007/s10853-006-0585-7 ↗
12. The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation10.1016/j.cemconres.2004.10.042 ↗
13. Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastes10.1016/j.jhazmat.2008.12.121 ↗
14. Structure and mechanical properties of aluminosilicate geopolymer composites with Portland cement and its constituent minerals10.1016/j.cemconres.2009.12.003 ↗
15. Microanalysis of calcium silicate hydrate gel formed within a geopolymeric binder10.1023/A:1025904905176 ↗
16. (Micro)-structural comparison between geopolymers, alkali-activated slag cement and Portland cement10.1016/j.jeurceramsoc.2005.12.021 ↗
17. Effects of NaOH concentrations on physical and electrical properties of high calcium fly ash geopolymer paste10.1016/j.cemconcomp.2013.09.012 ↗
18. Use of OPC to improve setting and early strength properties of low calcium fly ash geopolymer concrete cured at room temperature10.1016/j.cemconcomp.2014.08.008 ↗
19. Alkali-activated binders: a review. Part 2. About materials and binders manufacture10.1016/j.conbuildmat.2007.03.019 ↗
20. Effect of calcium on geopolymerization of aluminosilicate wastes10.1061/(ASCE)MT.1943-5533.0000352 ↗
21. Influence of OPC replacement and manufacturing procedures on the properties of self-cured geopolymer10.1016/j.conbuildmat.2014.09.065 ↗
22. Thermal behaviour of geopolymers prepared using class F fly ash and elevated temperature curing10.1016/j.cemconres.2006.03.022 ↗
23. Geopolymeric materials prepared using Class F fly ash and elevated temperature curing10.1016/j.cemconres.2004.06.031 ↗
24. Ambient and elevated temperature geopolymerization behaviour of Class F fly ash10.1080/0371750X.2014.922428 ↗
25. High-strength geopolymer using fine high-calcium fly ash10.1061/(ASCE)MT.1943-5533.0000161 ↗
26. Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition10.1016/j.conbuildmat.2014.05.080 ↗
27. Compressive strength of geopolymers produced by ordinary Portland cement: application of genetic programming for design10.1016/j.matdes.2012.07.012 ↗
28. Properties of high calcium fly ash geopolymer pastes with Portland cement as an additive10.1007/s12613-013-0715-6 ↗
29. New cements for the 21st century: the pursuit of an alternative to Portland cement10.1016/j.cemconres.2011.03.016 ↗
30. Geopolymer manufacture and applications – main problems when using concrete technology
31. Properties of geopolymer mortar produced from fly ash and rice husk ash: influences of fly ash-rice husk ash ratio and Na2SiO3-NaOH ratio under curing by microwave energy
32. Utilization of cement kiln dust (CKD) to enhance mine tailings-based geopolymer bricks10.1016/j.conbuildmat.2012.11.069 ↗
33. Utilisation of waste material in geopolymeric concrete
34. Influence of NaOH solution on the synthesis of fly ash geopolymer10.1016/j.mineng.2009.03.022 ↗
35. Workability and strength of coarse high calcium fly ash geopolymer10.1016/j.cemconcomp.2006.11.002 ↗
36. Paisitsrisawat · 2009
37. Strength development in clay–fly ash geopolymer10.1016/j.conbuildmat.2012.11.015 ↗
38. Designing precursors for geopolymer cements10.1111/j.1551-2916.2008.02787.x ↗
39. Thermal activation of albite for the synthesis of one-part mix geopolymers10.1111/j.1551-2916.2011.04925.x ↗
40. Processing and characterization of calcined kaolin cement powder10.1016/j.conbuildmat.2011.12.079 ↗
41. BS EN 196-3:2005+A1:2008 · 2008
42. BS EN 196-1:2005 · 2005
43. Bye · 1983
44. Heat of hydration of high reactive pozzolans in blended cements: isothermal conduction calorimetry10.1016/j.tca.2005.05.014 ↗
45. Immobilization of the plating sludge by activation of pulverized fuel ash with sodium silicate solution
46. Characterization of natural pozzolan-based geopolymeric binders10.1016/j.cemconcomp.2014.06.010 ↗
47. NaOH-activated ground fly ash geopolymer cured at ambient temperature10.1016/j.fuel.2011.01.018 ↗
48. Alkali activation of a slag at ambient and elevated temperatures10.1016/j.cemconcomp.2011.08.003 ↗
49. Effect of mechanical activation of fly ash on the properties of geopolymer cured at ambient temperature10.1016/j.jmatprotec.2009.03.016 ↗
50. Effect of calcium silicate sources on geopolymerisation10.1016/j.cemconres.2007.11.001 ↗
51. Microstructure of geopolymer materials based on fly ash
52. Properties of alkali activated aluminosilicate material after thermal load10.1007/s10765-006-0077-7 ↗
53. Fly ash-based geopolymer concrete