Microstructure and durability of fly ash cement grouts for micropiles
Source abstract
Abstract
This paper presents a study on the possibility of using fly ash cement as grouts for micropiles. This type of special geotechnical work is commonly used for many applications. Generally, micropiles grouts are prepared using Portland cement, although the standards do not restrict the cement type to use, as long as they achieve a strength requirement. In this research, fly ash cement grouts made with w:c ratios 0.40, 0.45, 0.50 and 0.55 were studied from 2 up to 90 days of age. Their microstructure was characterized using the non-destructive impedance spectroscopy technique, electrical resistivity, and mercury intrusion porosimetry. Their durability properties have been studied by determining the water penetration under pressure, and the chloride diffusion coefficient. The compressive strength was also measured and determined, and a maximum water:cement ratio, different for each cement type was obtained. All the results were compared to those obtained for Portland cement grouts. The results obtained confirm that the performance of micropiles made using fly ash cement grouts is adequate, and as it is well know the cements with mineral admixtures provide environmental benefits, so the use of cement including fly ash will contribute to the sustainability, with similar properties to those given by OPC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Grouting, Rheology, and Soil Mechanics · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Impedance spectroscopy study of hardened Portland cement paste10.1016/S0008-8846(02)00720-2 ↗
2. Microstructural modifications in Portland cement concrete due to forced ionic migration tests. Study by impedance spectroscopy10.1016/j.cemconres.2008.03.012 ↗
3. Armour · 2000
4. AENOR · 2006
5. Instrucciones de Construcción
6. Benefits of slag and fly ash10.1016/0950-0618(95)00014-3 ↗
7. Thermal conductivity and compressive strength of concrete incorporation with mineral admixtures10.1016/j.buildenv.2006.06.010 ↗
8. The effect of Persian Gulf tidal zone exposure on durability of mixes containing silica fume and blast furnace slag10.1016/j.conbuildmat.2008.02.009 ↗
9. Influencia de diferentes condiciones de curado en la estructura porosa y en las propiedades a edades tempranas de morteros que contienen ceniza volante y escoria de alto horno10.3989/mc.2012.06111 ↗
10. The effect of high-calcium fly ash on selected properties of self-compacting concrete10.1016/j.acme.2013.10.014 ↗
11. Effect of fly ash on Portland cement systems10.1016/S0008-8846(99)00153-2 ↗
12. Fly ash effects10.1016/j.cemconres.2003.03.001 ↗
13. Influence of fly ash fineness on strength, drying shrinkage and sulfate resistance of blended cement mortar10.1016/j.cemconres.2003.11.021 ↗
14. Utilization of fly ash with silica fume and properties of Portland cement–fly ash–silica fume concrete10.1016/j.fuel.2009.10.003 ↗
15. Performance of pfa concrete in a marine environment––10-year results10.1016/S0958-9465(02)00117-8 ↗
16. Predicting the chloride penetration of fly ash concrete in seawater10.1016/j.marstruc.2008.12.001 ↗
17. Utilization of fly ash concrete in marine environment for long term design life analysis10.1016/j.matdes.2009.09.024 ↗
18. Optimization of cement grouts containing silica fume and viscosity modifying admixture10.1061/(ASCE)MT.1943-5533.0000026 ↗
19. Fly ash utilization in grouting applications
20. Material properties of high volume fly ash cement paste structural fill10.1061/(ASCE)0899-1561(2005)17:6(686) ↗
21. Properties of self-compacting concrete containing class F fly ash10.1016/j.matdes.2010.08.043 ↗
22. Valorization of co-combustion fly ash in concrete production10.1016/j.matdes.2015.07.079 ↗
23. Water vapour sorption experiments on hardened cementitious materials10.1016/j.cemconres.2006.11.019 ↗
24. Effect of fly ash on chloride transport through concrete: study by impedance spectroscopy
25. The A.C. response of hardened cement paste10.1016/0008-8846(90)90051-X ↗
26. Impedance spectroscopy to characterize the pore structure during the hardening process of Portland cement paste10.1016/j.electacta.2005.02.125 ↗
27. Impedance spectroscopy: an efficient tool to determine the non-steady-state chloride diffusion coefficient in building materials10.1002/maco.201005775 ↗
28. On applicability of wenner method for resistivity measurements of concrete
29. Establishment of the durability indices for cement-based composite containing supplementary cementitious materials10.1016/j.matdes.2011.12.030 ↗
30. AENOR · 2000
31. AENOR · 2009
32. Aspects of concrete porosity revisited10.1016/S0008-8846(99)00122-2 ↗
33. Mercury porosimetry10.1016/S0008-8846(00)00370-7 ↗
34. Impedance measurements on cement paste10.1016/S0008-8846(97)00117-8 ↗
35. Moisture distribution in partially saturated concrete studied by impedance spectroscopy10.1007/s10921-013-0190-z ↗
36. Barsoukov · 2005
37. Selectivity study of the differential impedance analysis-comparison with the complex non-linear least-squares method
38. AENOR · 2014
39. Test methods for on site measurement of resistivity of concrete10.1007/BF02480599 ↗
40. Compressive strength and electrical properties of concrete with white Portland cement and blast-furnace slag10.1016/j.cemconcomp.2011.11.017 ↗
41. AENOR · 2009
42. Comisión permanente del · 2008
43. AENOR · 2009
44. Measurement of the steady and non-steady-state chloride diffusion coefficients in a migration test by means of monitoring the conductivity in the anolyte chamber. Comparison with natural diffusion tests10.1016/S0008-8846(01)00562-2 ↗
45. ASTM · 2012
46. AENOR · 2009
47. Impedance spectroscopy to characterise microsctructural changes in liquid and solid phases of mortars exposed to high temperature
48. Impedance spectroscopy study of the effect of environmental conditions in the microstructure development of OPC and slag cement mortars10.1016/j.acme.2014.06.002 ↗
49. Effect of fly ash fineness on compressive strength and pore size of blended cement paste10.1016/j.cemconcomp.2004.07.003 ↗
50. Influence of pozzolanic, slag, and chemical admixtures on pore size distribution and permeability of hardened cement pastes10.1520/CCA10203J ↗
51. Ortega · 2011
52. An experimental study on the properties of resistance to diffusion of chloride ions of fly ash and blast furnace slag concrete10.1016/S0008-8846(00)00250-7 ↗
53. Beneficial effect of fly ash on chloride diffusivity of hardened cement paste10.1016/S0008-8846(99)00047-2 ↗
54. Effect of environmental temperature and fly ash addition in hydraulic lime grout behaviour10.1016/j.conbuildmat.2010.02.001 ↗
55. Viscosity and hardened properties of self-compacting mortars with binary and ternary cementitious blends of fly ash and silica fume10.1016/j.conbuildmat.2012.07.081 ↗
56. Effect of sand, fly ash, and coarse aggregate gradation on preplaced aggregate concrete studied through factorial design10.1016/j.conbuildmat.2015.05.086 ↗
57. The impact of using fly ash, silica fume and calcium carbonate on the workability and compressive strength of mortar10.1016/j.proeng.2015.11.132 ↗
58. A study on the evaluation of field application of high-fluidity concrete containing high volume fly ash