journal article·2016-08

Numerical optimization of an impressed current cathodic protection system for reinforced concrete structures

Guofu Qiao, Bingbing Guo, Jinping Ou, Feng Xu, Zuohua Li

Publisher page

Abstract

Abstract Impressed current cathodic protection (ICCP) has been verified to be an effective method to control the corrosion of reinforced concrete (RC) structures, and the use of numerical simulation methods has become a powerful technique to investigate ICCP systems. This paper presents a numerical optimization method to design an economical and effective ICCP system for RC structures. First, the numerical model of the ICCP electrical field is built. The potential of the reinforcing steel and service life of the ICCP system are constrained by the protection potential in BS 12696:2012 and the life expectancy of the RC structure to be protected, and the accurate design parameters of the ICCP system, for example, the location and area of the anode overlay and the amplitude of the output voltage, are obtained by minimizing the total cost of the ICCP system. Finally, a small-scale RC T-shaped beam is adopted as an example to illustrate the numerical optimization method, and corresponding prototypes are developed to verify the corrosion control effect of the numerically optimized ICCP system.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Smart Materials for Construction · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Remote corrosion monitoring of the RC structures using the electrochemical wireless energy-harvesting sensors and networks10.1016/j.ndteint.2011.06.007 ↗
2. Optimization design of a corrosion monitoring sensor by FEM for RC structures10.1109/JSEN.2011.2112644 ↗
3. Early stage beneficial effects of cathodic protection in concrete structures10.1002/maco.201005803 ↗
4. Corrosion inhibitor systems for remedial treatment of reinforced concrete. Part 2: sodium monofluorophosphate10.1016/S0010-938X(02)00248-2 ↗
5. Corrosion inhibitor systems for remedial treatment of reinforced concrete. Part 1: calcium nitrite10.1016/S0010-938X(02)00012-4 ↗
6. Cathodic protection of new and old reinforced concrete structures10.1016/0010-938X(93)90393-U ↗
7. Ionic transport in cementitious materials under an externally applied electric field: Finite element modeling
8. Cathodic protection and cathodic prevention10.1016/0950-0618(95)00017-8 ↗
9. Passive corrosion control and active corrosion prevention of the reinforced concrete structures by electrochemical chloride removal and inhibitors10.1108/ACMM-03-2012-1156 ↗
10. Current distribution in reinforced concrete cathodic protection system with conductive mortar overlay anode10.1016/j.conbuildmat.2008.12.002 ↗
11. Modeling of potential distribution of subsea pipeline under cathodic protection by finite element method10.1002/maco.201407738 ↗
12. Influence of irregularities in the electrolyte on the cathodic protection of steel: a numerical and experimental study10.1002/maco.201307040 ↗
13. The selection and use of cathodic protection systems for the repair of reinforced concrete structures10.1016/j.conbuildmat.2012.05.037 ↗
14. Cramer · 2005
15. Sohanghpurwala · 2003
16. Protection of the opposite reinforcement layer of RC-structures by CP – Results of numerical simulations10.1002/maco.200905584 ↗
17. Protection current distribution in reinforced concrete cathodic protection systems10.1016/S0958-9465(01)00036-1 ↗
18. Effect of moisture on the spatial uniformity of cathodic protection of steel in reinforced concrete10.5006/1.3278188 ↗
19. Modeling cathodic prevention for unconventional concrete in salt-laden environment10.1108/00035591211224663 ↗
20. Application of cathodic protection for controlling macrocell corrosion in chloride contaminated RC structures10.1016/j.conbuildmat.2013.04.010 ↗
21. Light-weight cementitious conductive anode for impressed current cathodic protection of steel reinforced concrete application10.1016/j.conbuildmat.2014.08.032 ↗
22. B.S. Institution. Cathodic protection of steel in concrete. ISO 12696:20122012.
23. Powell · 2009
24. Multi-scale carbon-admixtures enhanced cementitious anodic materials for the impressed current cathodic protection of RC structures
25. Broomfield · 2008