journal article·2016-09

Laboratory and field evaluation of the warm fiber reinforced high performance asphalt mixtures (case study Karaj – Chaloos Road)

Hassan Fazaeli, Yousef Samin, Afshin Pirnoun, Asma Sadate Dabiri

Publisher page

Abstract

Abstract Using modified asphalt mixture is inevitable to improve technical performance of asphalt pavement and it will be achieved via asphalt mixture or bitumen improvement. In the present study, a combination of these methods are applied simultaneously using Fischer–Tropsch Paraffin wax (Sasobit) as one of the most widely used bitumen modifiers in the production of warm mix asphalt mixtures, and Polyolefin – Aramid FORTA polymer fibers as a reinforcing factor of asphalt mixture. The modified and unmodified asphalt performance at high, intermediate, and low temperatures were evaluated on two stages of laboratory and field sampling using dynamic creep, rutting, resilient modulus indirect tensile fatigue, moisture sensitivity, resistance for compaction, and fracture tests. The results indicate that simultaneous use of Polyolefin – Aramid FORTA polymer fibers and Fischer–Tropsch Paraffin wax (Sasobit) not only increase significantly the asphalt mixture resistance, but also it helps to improve asphalt mixture workability, including mixing, transportation, paving, and compacting. This will result in environmental pollutions and implementation cost reduction as well as asphalt life extension.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. A review of the fundamentals of polymer-modified asphalts: asphalt/polymer interactions and principles of compatibility10.1016/j.cis.2015.07.010 ↗
2. Rheology of conventional asphalt modified with SBS, Elvaloy and polyphosphoric acid10.1016/j.fuproc.2015.09.002 ↗
3. Nanoclay application to asphalt concrete: characterization of polymer and linear nanocomposite-modified asphalt binder and mixture10.1016/j.conbuildmat.2015.05.019 ↗
4. Sustainable asphalt mixes: use of additives and recycled materials10.3846/bjrbe.2011.32 ↗
5. Evaluation of compactability and mechanical properties of bituminous mixes with warm additives10.1016/j.conbuildmat.2010.11.024 ↗
6. High and low temperature properties of crumb rubber modified binders containing warm mix asphalt additives10.1016/j.conbuildmat.2013.12.026 ↗
7. Analysis on fatigue crack growth laws for crumb rubber modified (CRM) asphalt mixture10.1016/j.conbuildmat.2013.06.014 ↗
8. High and low temperature properties of FT paraffin modified bitumen10.1155/2012/406791 ↗
9. Warm mix asphalt: European practice
10. Hurley · 2006
11. Hurley · 2005
12. Warm asphalt mixes by adding a synthetic zeolite
13. Sargand · 2009
14. Experimental fracture toughness study for some modified asphalt mixtures10.4028/www.scientific.net/AMR.723.337 ↗
15. Effect of temperature and air void on mixed mode fracture toughness of modified asphalt mixtures10.1016/j.conbuildmat.2015.07.165 ↗
16. Viscosity-temperature characteristics of warm mix asphalt binder with Sasobit®10.1016/j.conbuildmat.2014.12.123 ↗
17. Selection of type of warm mix asphalt additive based on the rheological properties of asphalt binders10.1016/j.jclepro.2015.03.036 ↗
18. Fatigue cracking resistance of fiber-reinforced asphalt concrete10.1177/004051750507500206 ↗
19. Cleven · 2000
20. Utilization of waste fibers in stone matrix asphalt mixtures10.1016/j.resconrec.2004.04.005 ↗
21. Chowdhury · 2006
22. Effects of fibers on the dynamic properties of asphalt mixtures10.1007/s11595-006-4733-3 ↗
23. Rutting characteristics of bituminous mixes reinforced with glass fiber
24. Evaluation of fiber-reinforced asphalt mixtures using advanced material characterization tests10.1520/JTE102442 ↗
25. Majidzadeh · 1976
26. Laboratory mixed-mode cracking of asphalt concrete using the single-edge notch beam10.1080/14680629.2010.9690314 ↗
27. Development of a single-edge notched beam test for asphalt concrete mixtures10.1520/JTE12579 ↗
28. Micromechanical fracture modeling of asphalt concrete using a single-edge notched beam test10.1617/s11527-008-9412-8 ↗
29. Evaluation of fracture toughness of semirigid asphalt concretes at low temperatures10.3141/2210-04 ↗
30. Low-temperature fracture characteristics of selected warm-mix asphalt concretes10.3141/2208-06 ↗
31. Determination of crack growth rate parameters of asphalt mixtures using the Superpave IDT
32. Investigation of the fracture resistance of hot-mix asphalt concrete using a disk-shaped compact tension test
33. Numerical fracture analysis on the specimen size dependency of asphalt concrete using a cohesive softening model10.1016/j.conbuildmat.2008.08.014 ↗
34. Effects of recycled asphalt pavement amounts on low-temperature cracking performance of asphalt mixtures using acoustic emissions10.3141/2208-09 ↗
35. Mixed mode fracture toughness of recycled tire rubber-filled concrete for airfield rigid pavements
36. Semi-circular bending test; simple but useful
37. Using semi circular bending test to evaluate low temperature fracture resistance for asphalt concrete10.1007/s11340-009-9303-0 ↗
38. Mixed mode fracture resistance of asphalt concrete mixtures10.1016/j.engfracmech.2012.06.015 ↗
39. Fatigue life evaluation of asphalt rubber mixtures using semi-circular bending test10.4028/www.scientific.net/AMR.255-260.3444 ↗
40. Characterization of asphalt mixture’s fracture resistance using the semi-circular bending (SCB) test
41. Fracture characteristics of asphalt mixtures containing incinerator bottom ash aggregate10.3141/2180-01 ↗
42. Investigation of fracture properties of California asphalt mixtures using semicircular bending and beam fatigue tests10.1080/14680629.2013.812835 ↗
43. Modeling and evaluation of the cracking resistance of asphalt mixtures using the semi-circular bending test at intermediate temperatures10.1080/14680629.2012.657035 ↗
44. Using notched semi circular bending fatigue test to characterize fracture resistance of asphalt mixtures10.1016/j.engfracmech.2013.07.003 ↗
45. Effect of load application rate and temperature on the fracture energy of asphalt mixtures10.1016/j.conbuildmat.2013.07.084 ↗
46. Extended FEM modeling of crack propagation using the semi-circular bending test10.1016/j.conbuildmat.2013.06.046 ↗
47. Experimental study on mode I fracture toughness of different asphalt mixtures
48. Study of characteristic specification on mixed mode fracture toughness of asphalt mixtures10.1016/j.conbuildmat.2013.12.097 ↗
49. The fracture process zone in asphalt mixture at low temperature10.1016/j.engfracmech.2010.02.018 ↗