A novel rapid microwave-thermal process for accelerated curing of concrete: Prototype design, optimal process and experimental investigations
Source abstract
Abstract
Abstract In this work, a mobile microwave (MW)-assisted curing unit for the accelerated curing of concrete workpiece is designed based on coupled electromagnetic (MW)–thermal analysis. The design of this unit is described together with experimental investigations into the heating characteristics of concrete workpiece subjected to the MW-accelerated curing process. Mathematical models are applied to design a horn-shaped MW cavity and as a basis for constructing a stationary and a moving MW-accelerated curing unit that uses MW energy at an operating frequency of 2.45 ± 0.05 GHz and at powers of 400 W and 800 W. The experiments included the effects of MW curing on the temperature evolution, moisture content variation, and compressive strength development properties of the concrete. Also, the concrete workpiece was compared to water-cured conventional concretes and air-cured conventional concretes on the basis of these properties. Based on the concept of antenna, a rectangular horn-shaped cavity of 246.7 mm wide × 333.68 mm long is designed showing a uniform thermal distribution for concrete curing. From the experiments, it was found that the application period for curing using the mobile MW-curing unit was considerably shorter than for conventional curing methods. The appropriate preheating interval is 30 min, and MW energizing for 15 min/time and a paused duration of 60 min produces maximum compressive strength. However, the time needed for curing was considerable. When concrete was heated using MW energy for more than 90 min at over 80 °C, the effect was a continuous decrease in compressive strength. Further, at early age, the compressive strength development of the concrete workpiece subjected to MW curing was greater than that achieved by air curing or water wet-curing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microwave-Assisted Synthesis and Applications · Concrete and Cement Materials Research · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Two dimensional finite element analysis of microwave heating10.1002/aic.690381009 ↗
2. Heat and mass transfer in microwave processing10.1016/S0065-2717(08)70250-8 ↗
3. Computation of scattering resonances for dielectric resonators10.1016/j.camwa.2010.06.044 ↗
4. A lattice Boltzmann model for electromagnetic waves propagating in a one-dimensional dispersive medium10.1016/j.camwa.2013.01.014 ↗
5. Regier · 2001
6. Thermal lagging in living biological tissue based on non-equilibrium heat transfer between tissue, arterial and venous bloods10.1016/j.ijheatmasstransfer.2011.02.020 ↗
7. A level set evolution strategy in microwave imaging for early breast cancer detection10.1016/j.camwa.2008.01.004 ↗
8. Role of resonance on microwave heating of oil–water emulsions10.1002/aic.10207 ↗
9. Microwave drying of softwood in an oversized waveguide: theory and experiment10.1002/aic.690431019 ↗
10. Drying of pepper seeds using a combined microwave fluidized bed dryer10.1080/07373939808917440 ↗
11. Microwave curing of Portland cement concrete: experimental results and feasibility for practical applications10.1016/0950-0618(94)00001-I ↗
12. Microwave curing at operating frequency of 2.45GHz of Portland cement paste at early-stage using a multi-mode cavity: experimental and numerical analysis on heat transfer characteristics10.1016/j.icheatmasstransfer.2010.09.001 ↗
13. American Concrete Institute · 2008
14. Development of compressive strength of cement paste under accelerated curing by using a continuous microwave thermal processor10.1016/j.msea.2007.03.035 ↗
15. Microwave curing technique in concrete manufacture10.1016/0008-8846(87)90103-7 ↗
16. Thermal acceleration of Portland cement mortars with microwave energy10.1016/0008-8846(91)90174-G ↗
17. Microwave curing effect on the 28 day strength of cementitious materials10.1016/S0008-8846(98)00189-6 ↗
18. Microwave Method and Apparatus for Heating Pavement, by M.R. Jeppson, C. Calif, (1981). United States Patent, 425 2 487.
19. Metaxas · 1983
20. Concrete Curing Machine, by C.B. Sipherd, J.R. Lease, R.L. Stainbrook, (2002). United States Patent 649 7 531 B1.
21. Chow Ting Chan · 2000
22. COMSOL Inc, COMSOL Multiphysics User’s Guide Version 3.4, COMSOL AB, Singapore, 2007.
23. Experimental and numerical study of microwave drying in unsaturated porous material10.1016/S0735-1933(01)00265-2 ↗
24. Design considerations for microwave oven cavities
25. Mathematical analysis of microwave heating process10.1016/j.jfoodeng.2004.08.027 ↗
26. ASTM C150-12 Standard Specification for Portland Cement
27. ASTM C1602/C1602M - 12 Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
28. ASTM C33/C33M – 13 Standard Specification for Concrete Aggregates
29. British Standards Institution · 2011
30. ASTM C192/C192M-14 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
31. British Standards Institution · 2011