Experimental study of the effect of simultaneous mechanical and high-temperature loadings on the behaviour of textile-reinforced concrete (TRC)
Source abstract
Abstract
Abstract Textile-reinforced mortar (or textile-reinforced concrete, TRC) may be used to repair and/or strengthen structural elements of existing construction works (buildings, bridges, etc.) or may be used as constituent elements of new structures. When structures are subjected to fire, they are simultaneously submitted to high temperatures (potentially up to 1200 °C) and mechanical loadings. The elevated temperature thermomechanical behaviour of TRC remains both poorly understood and poorly studied. This study describes the experimental identification, at the macroscale level, of the thermomechanical behaviour of two TRC composites. It shows that the thermomechanical behaviour of two TRC composites is nonlinear and progressively evolves with the increase of the temperature level. The evolution of certain characteristics (the ultimate stress, the stress corresponding to the loss of linearity of the first zone of the stress/strain curve, the stress corresponding to the start of the post cracking stage, the maximum thermomechanical strain, the initial stiffness, the stiffness of the post cracked composite) of the studied materials as a function of the temperature levels will be identified. When temperature levels vary from 100 °C to 300 °C, the main parameters (the ultimate stress, the stress corresponding to the loss of linearity of the first zone of the stress/strain curve, the stress corresponding to the start of the post cracking stage, the initial stiffness, the stiffness of the post cracked composite) of the studied materials are in general gradually decreased with the increase of the temperature level. The influence of a grid and chopped strand textile reinforcement on the cement based composite under thermomechanical loading is analysed and discussed. The experiments show a clear difference between the thermomechanical responses of two TRC composites. Additionally, the cracked specimens are examined.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Masonry and Concrete Structural Analysis · Building materials and conservation · Medieval Architecture and Archaeology
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Novel cement-based composites for the strengthening and repair of concrete structures. Review article10.1016/j.conbuildmat.2012.11.117 ↗
2. Application of textile-reinforced concrete (TRC) for structural strengthening and in prefabrication
3. Brameshuber · 2006
4. Effect of elevated temperatures on the mechanical behavior of basalt textile reinforced refractory concrete10.1016/j.matdes.2014.08.060 ↗
5. Contribution to direct tensile testing of textile reinforced concrete (TRC) composites
6. Tensile properties of polypropylene reinforced cement with different fiber orientations
7. Bending behaviour of Textile Reinforced Concrete sandwich beams10.1016/j.conbuildmat.2015.07.169 ↗
8. Investigations on the bearing behaviour and application potential of textile reinforced concrete10.1016/j.engstruct.2008.01.006 ↗
9. Load bearing behaviour and simulation of textile reinforced concrete10.1617/s11527-005-9039-y ↗
10. J. Hegger, S. Voss, Textile reinforced concrete – bearing behaviour, design, application. Composites in construction – Third International Conference, Lyon, France, 2005.
11. Hegger · 2005
12. J. Hegger, S. Voss, Textile reinforced concrete under biaxial loading, in: 6th International RILEM Symposium on Fibre Reinforced Concretes; 2004.
13. Distributed cracking and stiffness degradation in fabric-cement composites10.1007/s11527-005-9005-8 ↗
14. U. Dilthey, M. Schleser, M. Möller, O. Weichold, Application of polymers in textile reinforced concrete – from the interface to construction elements, in: 1st International RILEM Conference on Textile Reinforced Concrete, 2006, 55–64.10.1617/2351580087.006 ↗
15. M. Raupach, J. Orlowsky, T. Büttner, U. Dilthey, M. Schleser, Epoxy-impregnated textiles in concrete – load bearing capacity and durability, in: 1st International RILEM Conference on Textile Reinforced Concrete (ICTRC), 2006, 77–88.10.1617/2351580087.008 ↗
16. Influences of textile characteristics on the tensile properties of warp knitted cement based composites10.1016/j.cemconcomp.2007.09.001 ↗
17. Bending fracture of textile reinforced cement laminates monitored by acoustic emission: influence of aspect ratio10.1016/j.conbuildmat.2014.07.080 ↗
18. A new fire resistant FRP for externally bonded concrete repair10.1016/j.conbuildmat.2013.01.008 ↗
19. Heat transfer and structural response modelling of FRP confined rectangular concrete columns in fire10.1016/j.conbuildmat.2010.12.064 ↗
20. Fire endurance and residual strength of insulated concrete beams strengthened with near-surface mounted reinforcement10.1061/(ASCE)CC.1943-5614.0000338 ↗
21. Analysis of RC T-beams strengthened with CFRP plates under fire loading using ANN10.1016/j.conbuildmat.2012.07.001 ↗
22. Fire protection systems for reinforced concrete slabs strengthened with CFRP laminates10.1016/j.conbuildmat.2013.05.019 ↗
23. Effect of bond degradation on fire resistance of FRP-strengthened reinforced concrete beams10.1016/j.compositesb.2010.11.004 ↗
24. D. Ehlig, S., Hothan, Reinforced concrete slabs strengthened with textile reinforced concrete sujected to fire, in: 2nd International RILEM Workshop on Concrete Spalling due to Fire Exposure, 5–7 Octorber 2011, Delft, The Netherlands.
25. Bisby · 2013
26. Fire resistance of textile fiber composites used in civil engineering10.1016/B978-1-78242-446-8.00008-2 ↗
27. High temperature tests on textile reinforced concrete (TRC) strain specimens
28. T. Büttner, J. Orlowsky, M. Raupach, Fire resistance tests of textile reinforced concrete under static loading – results and future developments, in: Proceedings of the Fifth International RILEM Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC5); 2014.
29. Reinhardt · 2008
30. High temperature mechanical performance and micro interfacial adhesive failure of textile reinforced concrete thin-plate10.1631/jzus.A1300150 ↗
31. K. Tan, Y. Zhou, Fiber-reinforced cement composites under elevated temperatures, in: Proceeding of the Fifth International RILEM Workshop on High Performance Fiber, 2007.
32. J. Blom, J. Wastiels, Modeling textile reinforced cementitious composites – effect of elevated temperatures. in: Proceeding of the 19th International Conference on Composite Materials, 2013.
33. Textile reinforced mortar at high temperatures10.4028/www.scientific.net/AMM.82.202 ↗
34. J. Blom, J.V. Ackeren, J. Wastiels, Study of the bending behaviour of textile reinforced cementitious composites when exposed to high temperatures, in: Proceeding of the 2nd International RILEM Conference on Strain Hardening Cementitious Composites (SHCC2-Rio), 2011.
35. A study on the effects of high temperature on mechanical properties of fiber reinforced cementitious composites10.1016/j.compositesb.2011.10.005 ↗
36. Effect of fibre content and specimen shape on residual strength of polypropylene fibre self-compacting concrete exposed to elevated temperatures10.1016/j.jksues.2012.12.002 ↗
37. Performance evaluation of cement mortars containing marble dust and glass fiber exposed to high temperature by using Taguchi method10.1016/j.conbuildmat.2014.02.061 ↗
38. Study on residual behaviour and flexural toughness of fibre cocktail reinforced self compacting high performance concrete after exposure to high temperature10.1016/j.conbuildmat.2011.04.058 ↗
39. ASTM E119-15: standard test methods for fire tests of building construction and materials; 2015.
40. Nguyen · 2015
41. X.H. Vu, A. Junes, A. Si Larbi, P. Hamelin, Caractérisation expérimentale des propriétés thermo-mécaniques à haute température du mortier renforcé de textile (TRC). Paper CIGOS2013-096 (9 pages, in French), in: Procceding of International Conference CIGOS2013: construction and sustainable development. Conference on 4th and 5th April 2013, Lyon, France; 2013 [in French].
42. T.H. Nguyen, X.H. Vu, A. Si Larbi, E. Ferrier, Comportement thermo-mécanique à haute température de l’interface adhesive-matériau composite. Paper CIGOS2013-097 (8 pages, in French), in: Procceding of International Conference CIGOS2013: construction and sustainable development. Conference on 4th and 5th April 2013, Lyon, France [in French].
43. EN 1992-1-2 · 2004
44. M. Michel, J. Ambroise, Développement de composites à matrice minérale et à renfort textile. 31ème Rencontres universitaires de l’AUGC, 2013 [in French].
45. Improving the mechanical performance of high-grade slag cement by the addition of Portland cement and sulfoaluminate cement10.1016/j.conbuildmat.2012.04.041 ↗
46. Michel · 2009
47. S. Feih, E. Boiocchi, E. Kandare, Z. Mathys, A. Gibson, A. Mouritz, Strength degradation of glass and carbon fibres at high temperature, in: 17th Annual ICCM conference, Edinburgh, UK, 2009.
48. Behaviour of cement concrete at high temperature
49. Kruger · 2006
50. Temperature, pore pressure and mass variation of concrete subjected to high temperature – experimental and numerical discussion on spalling risk10.1016/j.cemconres.2009.10.011 ↗