Bonding quality of industrially produced cross-laminated timber (CLT) as determined in delamination tests
Source abstract
Abstract
Abstract The resistance to delamination of cross-laminated timber (CLT) made from spruce has been investigated. The main goal was to examine if delamination results are influenced by the shape of test specimens as both square and round specimens may be evaluated according to the CLT standard EN 16351. Furthermore, the influence of the production parameters number of layers, layer thickness and bonding pressure on delamination behavior were investigated. The results show that specimen shape and number of layers affect the resistance to delamination. Square specimens and a high number of layers show significantly higher delamination than round specimens and specimens with low number of layers. Layer thickness and bonding pressure, however, have no influence. As the number of specimens which exceeded delamination or wood failure requirements given in the CLT standard was very high it is questionable, if the applied delamination procedure is suitable for evaluating the bond integrity of CLT. As a result, it is recommended to eliminate the option to use square or round specimens in delamination tests and to revise the CLT standard accordingly. Furthermore, we suggest either to adjust the delamination test parameters or to develop a new test method to be able to assess bond durability more realistically.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Wood Treatment and Properties · Structural Analysis of Composite Materials · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Schickhofer · 2010
2. EN 16351 · 2015
3. Comparison of bending stiffness of cross-laminated solid timber derived by modal analysis of full panels and by bending tests of strip-shaped specimens10.1007/s00107-011-0521-7 ↗
4. EN 15425 · 2008
5. EN 301 · 2013
6. DIBt (Deutsches Institut für Bautechnik). Leno Brettsperrholz, Merk Timber GmbH, Z-9.1-501, Berlin, 2014.
7. OIB (Österreichisches Institut für Bautechnik). Cross Laminated Timber (CLT) Solid wood slab elements to be used as structural elements in buildings, Noritec Holzindustrie GmbH, ETA-12/0281, Vienna, 2012.
8. R. Brandner. Production and Technology of Cross Laminated Timber (CLT): A state-of-the-art Report. European Conference on Cross Laminated Timber (CLT), Graz, Austria, 2013, pp. 3–36.
9. R. Wagenführ. Holzatlas. 6. Auflage ed., Fachbuchverlag Leipzig, München, 2007.
10. Measurement of moisture-related strain in bonded ash depending on adhesive type and glueline thickness10.1515/hf-2014-0324 ↗
11. Results of accelerated tests and long-term exposures on glue joints in laminated beams10.1115/1.4017749 ↗
12. Delaminierungseigenschaften und Scherfestigkeiten von verklebten rotkernigen Buchenholzlamellen10.1007/s00107-006-0135-7 ↗
13. Influence of wood properties and bonding parameters on bond durability of European Beech (Fagus sylvatica L.) glulams10.1051/forest/2010002 ↗
14. S. Clauß. Structure-property relationships of one-component moisture-curing polyurethane adhesives under thermal load. Dissertation, ETH Zurich, Zurich, 2011, p. 156.
15. Gluing of European beech wood for load bearing timber structures10.1007/s00107-009-0382-5 ↗
16. Structural bonding of ash (Fraxinus excelsior L.): resistance to delamination and performance in shearing tests10.1007/s00107-014-0778-8 ↗
17. Shear strength and durability testing of adhesive bonds in cross-laminated timber10.1080/00218464.2015.1094391 ↗
18. Comparison of newly proposed test methods to evaluate the bonding quality of Cross-Laminated Timber (CLT) panels by means of experimental data and finite element (FE) analysis10.1016/j.conbuildmat.2016.08.113 ↗