journal article·2017-07

Cement type composite panels manufactured using paper mill sludge as filler

Ayfer Donmez Cavdar, Husnu Yel, Sevda Boran, Emrah Pesman

Publisher page

Abstract

Abstract The aim of this study was to evaluate some physical and mechanical properties of the paper mill (PMS) and spruce planer shaving added cement boards. Also the effect of sludge type in consequence of waste water treatment technique on properties of wood-cement boards (WCB) was investigated. The wood/cement ratios were used as 1/3, based on the oven dry weight for the WCB manufacture. PMS was used up to 20% wt of total composite based on organic (wood) and inorganic (cement) amounts. Black sludge has shown more improvement than grey sludge on properties of WCBs, which indicates the anaerobic waste treatment technique is more effective for additive in WCB. The modulus of rupture and elasticity values of the WCBs with 5% of grey sludge, 5% and 10% of mixture of grey and black sludge were acceptable limits according to EN 634-2 standard. The mechanical strengths of all WCBs with black sludge were found above the specified EN standard. This suggests that PMS depending on sludge type may be used up to 20% wt of total composite weight for the commercial production of WCBs, which could expand the raw material base for this panel product.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Recycling and utilization of industrial and municipal waste in materials production · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. P.D. Evans, Wood-cement composites in the Asia-Pacific Region, Proceeding of a Workshop, Canberra, Australia, 2000.
2. Development of accelerated processing techniques for cement-bonded wood particleboard10.1016/S0958-9465(02)00062-8 ↗
3. Wood-cement composites: a review10.1007/s00107-004-0501-2 ↗
4. Dimensional instability of cement-bonded particleboard: the effect of surface coating10.1016/j.cemconres.2003.12.010 ↗
5. Cement bonded composites-A mechanical review10.15376/biores.3.2.602-626 ↗
6. Mechanical and physical properties of three-layer cement–bonded particleboards from Leucaena leucocephala (Petai Belalang)
7. Selected physic-mechanical properties of cement-bonded particleboard made from pine (Pinus caribaea M.) sawdust-coir (Cocos nucifera L.) mixture
8. Cement-bonded composites from lignocellulosic wastes10.1016/j.conbuildmat.2010.02.003 ↗
9. Mechanical and physical properties of cement-bonded particleboard made from tea residues and hardboards10.4028/www.scientific.net/KEM.471-472.572 ↗
10. Manufacture of particleboard based on cement bag and castor oil polyurethane resin10.1016/j.conbuildmat.2015.03.114 ↗
11. Use of pulp and paper mill residual solids in production of cellucrete10.1016/j.cemconres.2003.12.013 ↗
12. Physico-mechanical properties and decay resistance of Cupressus spp. cement-bonded particleboards10.1016/j.cemconcomp.2004.02.046 ↗
13. Natural durability and performance of hornbeam cement bonded particleboard10.4067/S0718-221X2008000200002 ↗
14. F.C., Chang, F. Lam, Use of mountain pine beetle killed wood to produce cement-bonded particleboard, Wood Fiber Sci., 41 (2009) 291–299.
15. Use of mountain pine beetle killed wood to produce cement-bonded particleboard
16. The influence of wood extractives and additives on the hydration kinetics of cement paste and cement-bonded particleboard10.3923/jas.2011.2186.2192 ↗
17. G.C.H. Doudart de la Gree, Q.L. Yu, H.J.H. Brouwers, wood-wool cement board: Optimized inorganic coating, Proceedings of the 14th International Inorganic-Bonded Fiber Composites Conference, September 2014, pp. 154–164.
18. Anaerobic digestion of pulp and paper mill wastewater and sludge10.1016/j.watres.2014.07.022 ↗
19. Paper mill sludge ash as supplementary cementitious material10.1061/(ASCE)MT.1943-5533.0000218 ↗
20. The comparison of the migration and transformation behavior of heavy metals during pyrolysis and liquefaction of municipal sewage sludge, paper mill sludge, and slaughterhouse sludge10.1016/j.biortech.2015.08.147 ↗
21. Fenton-like degradation of methylene blue using paper mill sludge-derived magnetically separable heterogeneous catalyst: characterization and mechanism10.1016/j.jes.2015.01.026 ↗
22. Bioconversion of paper mill sludge to bioethanol in the presence of accelerants or hydrogen peroxide pretreatment10.1016/j.biortech.2015.06.010 ↗
23. A. M. Dunster, “Characterization of Mineral Wastes, Resources and Processing technologies – Integrated waste management for the production of construction material. Case Study: Paper sludge and paper sludge ash in Portland cement manufacture” WRT 177/WR0115, 2007. (accessed 13.07.16).
24. Water requirement in manufacturing of cement-bonded particleboards10.1007/BF02610947 ↗
25. The influence of cement-wood ratio and cement type on bending strength and dimensional stability of wood-cement composite panels
26. The effect of cement-wood ratio on the strength properties of cement-bonded particleboard from spruce
27. Cement-bonded particleboard from pre-soaked oil palm trunk: effects of particle size and chemical additive
28. S.O.O. Badejo, Influence of process variables on properties of cement-bonded particleboards from mixed tropical hardwoods. Ph.D. thesis, Federal University of Technology, Akure, Ondo State, Nigeria, 1999.
29. Semple · 2004
30. L.F. Ma, H. Yamauchi, O.R. Pulido, H. Sasaki, S. Kawai, Production and properties of oriented cement-bonded boards from Sugi (Cryptomeria japonica D. Don), Wood-Cement Composites in the Asia-Pacific Region, Canberra, Australia, 2000, pp. 140–147.
31. Effects of carbonation on the leachability and compressive strength of cement-solidified and geopolymer-solidified synthetic metal wastes10.1016/j.jenvman.2012.01.029 ↗
32. Heavy metals in cement and concrete resulting from the co-incineration of in wastes in cement kilns with regard to the legitimacy of waste utilisation
33. Degremont, Liquid sludge treatment. In: G. Bakasova, M. Volgina, L. Reshetnikova, K. Uspenskaya, (Eds.), Technical handbook on water treatment, Saint-Petersburg: New journal, 2007, pp. 1169–1263.
34. Effects of soil on trace metal leachability from papermill ashes and sludges10.2134/jeq1999.00472425002800010040x ↗
35. The properties of cement pastes and mortars processed with some heavy metal nitrates containing solutions10.1016/j.proeng.2015.06.121 ↗
36. Wood-cement compatibility: review
37. A. Donmez Cavdar, H. Yel, H. Kalaycioglu, U. Aras, Physical and mechanical properties of cement bonded particleboard made with paper mill sludge. KSU J. Eng. Sci., Special Issue (2012) 69-73.
38. Yel · 2015
39. Ajayi · 2000
40. Production and properties of a medium density wood-cement boards produced with oriented strands and silica fume
41. Evaluation of using waste timber railway sleepers in wood-cement composite materials10.1016/j.conbuildmat.2011.08.016 ↗
42. Rapid production of high-strength cement-bonded particleboard using gaseous or supercritical carbon dioxide10.1007/BF00766716 ↗