Accelerated testing of cementitious materials for resistance to physical sulfate attack
Source abstract
Abstract
Abstract Sulfate attack can cause serious damage to concrete structures. Susceptibility of binders to chemical sulfate attack is often tested, however, no standard method exists for evaluation of concrete’s resistance to physical sulfate attack. Traditional field testing of concrete’s resistance to sulfate attack may take several years. Thus development of an accelerated testing procedure is required. The aim of this research is to evaluate suitable exposure conditions and deterioration evaluation methods suitable for accelerated testing. A number of methods for assessment of the level of deterioration were assessed. It was found that 100 thermal cycles between 5 and 30 °C while immersed in 30 wt% sodium sulfate solution were sufficient to assess the resistance of a wide range of mortar mixes. The mass loss proved as the most effective measure of the deterioration level.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Building materials and conservation · Concrete and Cement Materials Research · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Current developments and future needs in standards for cementitious materials10.1016/j.cemconres.2015.05.022 ↗
2. Concrete deterioration from physical attack by salts
3. Mehta · 2006
4. Salt weathering distress on concrete exposed to sodium sulfate environment
5. Stark · 2002
6. G.J. Verbeck, Field and laboratory studies of the sulfate resistance of concrete, in: Perform. Concr. A Symp. Honor Thorbergur Thorvaldson, ACI Natl. Res. Counc. Canada, Repr. as Portl. Cem. Assoc. Bull. RX227, 1968.10.3138/9781487584092-008 ↗
7. ACI 318-14, Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, 2014.
8. CSA A23.1-14, Concrete materials and methods of concrete construction, Canadian Standards Association, Toronto, Ontario, Canada, 2014.
9. Degradation mechanism of slag blended mortars immersed in sodium sulfate solution10.1016/j.cemconres.2015.02.015 ↗
10. Effect of fly ash composition on sulfate resistance of cement
11. Sulfate attack on concrete
12. Long-term durability of blended cement against sulfate attack
13. Stark · 1989
14. Sulfate attack on concrete with mineral admixtures10.1016/0008-8846(95)00195-6 ↗
15. S. Zhutovsky, D. Hooton, Effect of supplementary cementitious materials on the resistance of mortar to physical sulfate salt attack, in: Proceedings 5th Int. Mater. Spec. Conf., CSCE 2016, London, Ontario, Canada, n.d.: p. 742.10.1617/s11527-016-0936-z ↗
16. ASTM C452-15, Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate, American Society for Testing and Materials, 2015.
17. ASTM C1012-15, Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution, American Society for Testing and Materials, 2015.
18. Mechanisms of concrete deterioration by sodium sulfate crystallization
19. F.R. McMillan, T.E. Stanton, I.L. Tyler, W.C. Hansen, Concrete exposed to sulfate soils, in: Long-Time Study Cem. Perform. Concr., ACI Special Publication, published in cooperation with the Portland Cement Association, American Concrete Institute, (Reprinted as Portland Cement Association Research Department Bulletin 30, Portland Cement Association, Skokie, IL.), Farmington Hills, MI, 1949.
20. Durability of self-consolidating concrete to sulfate attack under combined cyclic environments and flexural loading10.1016/j.cemconres.2008.12.003 ↗
21. Durability of self-consolidating concrete to different exposure regimes of sodium sulfate attack10.1617/s11527-008-9442-2 ↗
22. Investigation of concrete exposed to dual sulfate attack10.1016/j.cemconres.2014.06.002 ↗
23. Response of concrete to accelerated physical salt attack exposure10.1016/j.cemconres.2015.02.006 ↗
24. Experimental study on physical sulfate salt attack10.1617/s11527-016-0936-z ↗
25. Microstructural study of sulfate attack on ordinary and limestone Portland cements at ambient temperature10.1016/S0008-8846(02)00914-6 ↗
26. CSA A3001–13, Cementitious Materials Used in Concrete, Toronto, ON, Canada, n.d.
27. ASTM C597, Standard Test Method for Pulse Velocity Through Concrete, American Society for Testing and Materials, 2009.
28. ASTM C215, Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens, American Society for Testing and Materials, 2014.
29. ASTM C666-15, Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, 2015.