Strength modelling of Laminated Veneer Lumber (LVL) beams
Source abstract
Abstract
Abstract This paper develops a mechanical model to accurately predict the strength of Laminated Veneer Lumber (LVL) beams, and illustrates its applications to numerically predict the strength distribution of LVL beams manufactured from veneers rotary peeled from early to mid-rotation subtropical hardwood plantation logs. This resource is not traditionally used in the manufacturing of commercialised LVL beams. In the first part of the paper, the model is described, calibrated against experimental results performed on 8-ply LVL beams and then verified against experimental results performed on 13-ply LVL beams. Results show that the model is able to accurately reproduce the experimental results, both on flat and edge bending, with an average prediction-to-experiment ratio of 1.0 and a relatively low coefficient of variation of 0.10. A sound prediction of the non-linear behaviour of the beams before failure was also observed. In the second part of the paper illustrating the applications of the model, the mechanical properties of veneers analysed by the authors in a previous work are used as input values in the numerical model to predict the strength of six commercially available LVL beam sizes, manufactured from early to mid-rotation subtropical Gympie messmate (Eucalyptus cloeziana), spotted gum (Corymbia citriodora) and southern blue gum (Eucalyptus globulus) plantation veneers. The design strength (5th percentile) of the beams, obtained by Monte Carlo simulations, is reported and found to range from 32.3 MPa to 97.2 MPa, depending on the quality of the veneers used and the beam size. The LVL beams have design strengths comparable to, and in some cases up to 2.5 times higher than commercially available softwood LVL beams, making them attractive structural products. The strength variability is also reported in the paper for developing probability-based limit state design criteria in future studies.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Wood Treatment and Properties · Tree Root and Stability Studies · Bamboo properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Wood-based composite materials panel products, glued-laminated timber, structural composite lumber, and wood-nonwood composite materials
2. Computational modeling of material failure for parallel-aligned strand based wood composites10.1016/S0927-0256(97)00214-0 ↗
3. Computational modeling of strand-based wood composites10.1061/(ASCE)0733-9399(2001)127:8(844) ↗
4. A stochastic plasticity approach to strength modeling of strand-based wood composites10.1016/S0266-3538(02)00086-6 ↗
5. Modeling of parallel-aligned wood strand composites
6. Combined bending and axial loading in lumber10.1061/(ASCE)0733-9445(1986)112:12(2592) ↗
7. Bending strength of lumber10.1061/(ASCE)0733-9445(1990)116:5(1213) ↗
8. Numerical modelling of ductile damage evolution in tensile and bending tests of timber structures10.1016/j.mechmat.2013.09.004 ↗
9. Application of quasi-brittle material model for analysis of timber members10.1080/13287982.2015.11465183 ↗
10. Nonlinear finite element analysis of timber beams and joints using the layered approach and hypoelastic constitutive law10.1016/j.engstruct.2012.08.017 ↗
11. Finite element modelling of wooden structures at large deformations and brittle failure prediction10.1016/j.matdes.2009.05.024 ↗
12. A simple strategy for constitutive modelling of timber10.1016/j.conbuildmat.2013.11.100 ↗
13. Glued-Laminated beam strength: a model10.1061/JSDEAG.0005496 ↗
14. M. Frese, Computer-aided simulation of glulam strength parallel to grain, in: Proceedings of the ECCM 2010: IV European Conference on Computational Mechanics, Paris, France, Paper 382, 2010.
15. Probabilistic modeling of glued-laminated timber beams
16. Mechanical properties of rotary veneers recovered from early to mid-rotation subtropical hardwood plantation logs for veneer based composite applications10.1061/(ASCE)MT.1943-5533.0002055 ↗
17. McGavin · 2013
18. Bruel · 1982
19. A brief review of elasticity and viscoelasticity for solids10.4208/aamm.10-m1030 ↗
20. McGavin · 2006
21. Veneer based composite hollow utility poles manufactured from hardwood plantation thinned trees10.1016/j.conbuildmat.2014.05.093 ↗
22. Structural solutions to produce long timber veneer based composite hollow sections10.1016/j.conbuildmat.2017.02.046 ↗
23. Eucalyptus nitens laminated veneer lumber structural properties
24. Use of Brazilian eucalyptus to produce LVL panels
25. Ten new poplar cultivars provide laminated veneer lumber for structural application10.1007/s13595-014-0422-0 ↗
26. Stiffness and density analysis of rotary veneer recovered from six species of Australian plantation hardwoods
27. Variation in rotary veneer recovery from Australian plantation Eucalyptus globulus and Eucalyptus nitens
28. Wood
29. Isaksson · 1999
30. Weibull · 1939
31. Structural timber – variability and statistical modelling
32. Size effect in timber explained by a modified weakest link theory10.1139/l86-030 ↗
33. Effect of size on the bending strength of laminated veneer lumber10.1007/BF00702562 ↗
34. Efficient finite element modelling of timber beams strengthened with bonded fibre reinforced polymers10.1016/j.conbuildmat.2011.03.017 ↗
35. ReLAM: nonlinear probabilistic model for the analysis of reinforced glulam beams in bending10.1061/(ASCE)ST.1943-541X.0000496 ↗
36. Ductile design of glued-laminated timber beams10.1061/(ASCE)1084-0680(2009)14:3(113) ↗
37. Introduction: wood as a construction material
38. Neely · 1898
39. Glos · 1978
40. Statistical size effect in quasibrittle materials: computation and extreme value theory.“Fracture Mechanics of Concrete Structures”
41. The longitudinal Young's modulus of Pinus radiata10.1007/BF00349983 ↗
42. Differences in the mechanical properties of early and latewood within individual annual rings in dominant pine tree (Pinus sylvestris L.)
43. CIRAD, BING® (Beam Identification by Nondestructive Grading) software, , 2012.
44. AS/NZS 4357.2, Structural Laminated Veneer Lumber, Part 2: Determination of Structural Properties – Test methods, Standards Australia, Sydney, Australia, 2006.
45. Carter Holt Harvey Woodproducts · 2015
46. Hyne timber, LVL Design Information, , 2016.
47. Length effects in the orthotropic directions of structural composite lumber
48. Differences of tensile strength distribution between mechanically high-grade and low-grade Japanese larch lumber I: effect of length on the strength of lumber10.1007/BF01177726 ↗
49. Length effect on the performance of lumber in tension10.1139/l90-103 ↗
50. Length effects in 38 mm spruce–pine–fir dimension lumber10.1139/l90-028 ↗
51. Size effect on strength properties of chinese larch dimension lumber
52. ASTM D1900-16, Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens, ASTM International, Pennsylvania, USA, 2016.
53. Size effects in visually graded softwood structural lumber10.1061/(ASCE)0899-1561(1995)7:1(19) ↗