journal article·2017-12

Fly-ash cenosphere/clay blended composites for impact resistant tiles

A.G. Castellanos, H. Mawson, V. Burke, P. Prabhakar

Publisher page

Abstract

Abstract In this paper, blended fly-ash cenospheres/clay composites are explored as potential material for roofing tiles. In view of impact on roofs during hailstorms, the goal is to improve the impact resistance of roofing tile materials. It is hypothesized that the impact damage resistance of tiles can be improved while reducing their densities by incorporating hollow fly-ash cenospheres with base clay. Towards that, four types of composites, namely clay, clay + filler, clay + fly-ash and clay + filler + fly-ash are fabricated and evaluated under dynamic impact loading with 1 J impact energy. Changes in microstructure, densities and degree of damage in the four types of composites are compared. The addition of fly-ash cenospheres appears to improve the structural integrity of the tiles by reducing gaps observed in clay tiles. The highest reduction in density is observed in clay + fly-ash composites of approximately 36% as compared to clay samples. Whereas, a reduction in the degree of damage of about 22% and 26% are observed in clay + fly-ash and clay + filler + fly-ash specimens, respectively. Even though clay + filler and clay + filler + fly-ash manifested higher peak forces and lower degree of damage than clay + fly-ash composite, the reduction of densities are only 3.48% for clay + filler and 29.85% for clay + filler + fly-ash. Therefore, a combined consideration of degree of damage and density of composites reveals that clay + fly-ash composites are superior as compared to clay and other composites investigated in this study.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Building materials and conservation · Recycling and utilization of industrial and municipal waste in materials production · Masonry and Concrete Structural Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. NOAA, U.S. billion-dollar weather & climate disasters 1980–2015, 2015. URL http://www.ncdc.noaa.gov/billions/events.pdf.
2. J.D. Koontz, What are the effects of hail on residential roofing products, in: Proceedings of the Third International Symposium on Roofing Technology, Montreal, Canada, 1991.
3. NOAA, Severe weather 101: Hail basics, 2016. URL http://www.nssl.noaa.gov/education/svrwx101/hail/.
4. Prestressed ceramics and improvement of impact resistance10.1016/S0167-577X(02)00822-4 ↗
5. The relation between the penetration capability of long rods and their length to diameter ratio10.1016/S0734-743X(05)80025-9 ↗
6. Effects of fly ash addition on physical properties of porous clay-fly ash composites via polymeric replica technique
7. Alkali activated fly ash binders. A comparative study between sodium and potassium activators
8. Effect of fly ash fineness on microstructure of blended cement paste10.1016/j.conbuildmat.2005.12.024 ↗
9. Effect of different fibers on the mechanical properties of concrete containing fly ash10.1016/j.conbuildmat.2006.06.026 ↗
10. Thermal conductivity and compressive strength of concrete incorporation with mineral admixtures10.1016/j.buildenv.2006.06.010 ↗
11. Effects of fly ash on the properties of environmentally friendly dam concrete10.1016/j.fuel.2006.09.032 ↗
12. ‘Ecological bricks’ made with clays and steel dust pollutants10.1016/S0169-1317(96)00020-8 ↗
13. Utilization of sewage sludge ashes in the brick and tile industry10.2166/wst.1997.0418 ↗
14. Feasibility study of using brick made from municipal solid waste incinerator fly ash slag10.1016/j.jhazmat.2006.05.027 ↗
15. Preparation of load-bearing building materials from autoclaved phosphogypsum10.1016/j.conbuildmat.2008.02.011 ↗
16. Study on fired bricks with replacing clay by fly ash in high volume ratio10.1016/j.conbuildmat.2004.05.017 ↗
17. Fly ash addition in clayey materials to improve the quality of solid bricks10.1016/j.conbuildmat.2008.07.001 ↗
18. Utilization of industrial wastes and unprocessed micro-fillers for making cost effective mortars10.1016/j.conbuildmat.2005.06.009 ↗
19. Effect of fly ash and rice husk ash on the properties of burnt clay bricks
20. Comparative study of the properties of fly ah clay bricks and clay bricks
21. H. Liu, W.J. Burkett, K. Haynes, Improving freeze/thaw properties of the fly ash bricks, in: Proceedings of the World of Coal Ash Conference, Lexington, KY, April 14, 2005, pp. 1–17.
22. Development o ceramic tiles from coal fly ash and tincal ore waste10.1016/j.ceramint.2004.04.007 ↗
23. International ash utilization symposium
24. Sustainabe fly ash based roof tiles with waste polythene fibre: an experimental study10.4236/ojce.2016.62026 ↗
25. Mills · 2004
26. MatWeb, Concrete, sintered pulverized-fuel ash aggregate, 2017. URL http://www.matweb.com/search/DataSheet.aspx?MatGUID.
27. Development of the insulation materials from coal and fly ash, perlite, clay and linseed oil
28. csiconcrete, Fly ash material safety data sheet, 2017. URL http://csiconcrete.com/msds/flyash.pdf.
29. Digital Fire, Reference library, 2015. URL http://www.ncdc.noaa.gov/billions/events.pdf.
30. IBSTOCK, How clay bricks are made, 2005. URL http://www.crh-uk.com/pdfs/technical-support/TIS16Howbricksaremade.pdf.
31. ASTM International, Standard test method for breaking strength of ceramic tile, C648-04 (2014) 1–4, http://dx.doi.org/10.1520/C0648-04R14. URL www.astm.org.10.1520/C0648-04R14 ↗
32. Impact perforation of carbon-fiber reinforced plastics10.1016/0266-3538(90)90002-M ↗
33. Porous problems: ceramics and structural materials