Utilization of high carbon fly ash and copper slag in electrically conductive controlled low strength material
Source abstract
Abstract
Abstract The aim of this experimental investigation is to develop electrically conductive controlled low strength materials (CLSM) using both fly ash with high content of unburned carbon particles (HCFA) and copper slag as a fine aggregate, both of which are waste materials with low reuse rate. Various experiments, including flow consistency test, bulk density measurement, unconfined compression test, and electrical conductivity ( σ mix ) measurement were performed on the developed electrically conductive CLSM. For comparison with the results of the developed conductive CLSM, various experiments were also performed on CLSM containing electrically nonconductive particles (low carbon fly ash (LCFA) and sand). The results of this study demonstrate that σ mix of the tested CLSM specimens increases with increasing copper slag fraction in aggregate and the measured σ mix of the CLSM based on HCFA is greater than that with LCFA because both HCFA (or unburned carbon particles) and copper slag are electrically conductive. The measured flow consistency, bulk density, and unconfined compressive strength (UCS) of conductive CLSM were comparable with those of nonconductive CLSM. Therefore, the electrically conductive CLSM can be developed using both HCFA and copper slag. Finally, the relationship between UCS and 1/ σ mix was also investigated in this study.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Smart Materials for Construction · Materials Engineering and Processing · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. ACAA · 2003
2. ACI · 1999
3. ASTM, Standard test method for flow consistency of controlled low strength material (CLSM), D6103, West Conshohocken, PA, 2004.
4. ASTM, Standard test method for measurement of soil resistivity using the two electrode soil box method, G187, West Conshohocken, PA, 2012.
5. ASTM, Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete, C618-12a, West Conshohocken, PA, 2012.
6. ASTM, Standard test method for compressive strength of hydraulic cement mortars using 50mm cube specimens, C109, West Conshohocken, PA, 2013.
7. ASTM, Standard practice for use of unbonded caps in determination of compressive strength of hardened concrete cylinders, C1231, West Conshohocken, PA, 2014.
8. T. Ayano, K. Sakata, Durability of concrete with copper slag fine aggregate, Special Publication, 192, 141–158, 2000.
9. Electrical-resistivity of carbon and steel micro-fiber reinforced cements10.1016/0008-8846(92)90104-4 ↗
10. Stabilization of recycled base materials with high carbon fly ash10.1016/j.resconrec.2010.01.007 ↗
11. Conductivity of carbon fiber reinforced cement-based composites10.1016/S0958-9465(02)00138-5 ↗
12. Evaluation of cement hydration properties of cement-stabilized lead-contaminated soils using electrical resistivity measurement10.1061/(ASCE)HZ.1944-8376.0000073 ↗
13. Review of Archie's equation through theoretical derivation and experimental study on uncoated and hematite coated soils10.1016/j.jappgeo.2014.03.024 ↗
14. Compressive strength of one-part alkali activated fly ash using red mud as alkali supplier10.1016/j.conbuildmat.2016.08.015 ↗
15. Impact of unburned carbon particles on the electrical conductivity of fly ash slurry10.1061/(ASCE)GT.1943-5606.0001155 ↗
16. Small to intermediate strain properties of fly ashes with various carbon and biomass contents10.1139/cgj-2014-0069 ↗
17. Use of recycled copper slag for blended cements10.1002/jctb.1830 ↗
18. Mortar characterization using electrical resistivity method
19. Characteristics and utilisation of copper slag—a review10.1016/S0921-3449(02)00171-4 ↗
20. Effect of unburnt carbon on the corrosion performance of fly ash cement mortar10.1016/j.conbuildmat.2005.01.005 ↗
21. C.-L. Hwang, J.-C. Laiw, Properties of concrete using copper slag as a substitute for fine aggregate, Special Publication, 114, 1677–1696, 1989.
22. Utilization of industrial by-products for the production of controlled low strength materials (CLSM)10.1016/S0956-053X(03)00134-X ↗
23. The effect of particle size on thermal conduction in granular mixtures10.3390/ma8073975 ↗
24. Application of electrical resistivity for cement solidified/stabilized heavy metal contaminated soils
25. Experimental study on the electrical resistivity of soil–cement admixtures10.1007/s00254-007-0905-5 ↗
26. Use of waste copper slag, a sustainable material10.1007/s10163-014-0254-x ↗
27. High-carbon fly ash in manufacturing conductive CLSM and concrete10.1061/(ASCE)0899-1561(2006)18:6(743) ↗
28. Performance of industrial by-products in controlled low-strength materials (CLSM)10.1016/j.wasman.2007.03.030 ↗
29. Effect of type cement on the mechanical strength of copper slag mortars10.1590/S0370-44672013000100011 ↗
30. Performance of earthing systems of low resistivity soils10.1109/TPWRD.2006.874656 ↗
31. Reducing earth electrode resistance by replacing soil in critical resistance area
32. Parker · 1984
33. Electrical conductivity and compressive strength of carbon fiber reinforced fly ash geopolymeric composites10.1016/j.conbuildmat.2016.12.198 ↗
34. Construction experience with CLSM fly ash slurry for underground facilities
35. B.W. Ramme, J.J. Noegel, R.H. Setchell Jr, R.F. Bischke, Electrically conductive concrete and controlled low-strength materials, U.S. Patent No. 6,461,424., U.S. Patent and Trademark Office, 2002.
36. M. Shoya, M. Aba, Y. Tsukinaga, K. Tokuhashi, Frost resistance and air void system of self-compacting concrete incorporating slag as a fine aggregate, Special Publication, 212, 1093–1108, 2003.
37. Utilization of waste materials and by-products in producing controlled low-strength materials10.1016/j.resconrec.2009.06.001 ↗
38. Observations on the electrical resistivity of steel fibre reinforced concrete10.1617/s11527-013-0064-y ↗
39. Evaluation of controlled low strength materials containing industrial by-products10.1016/j.buildenv.2006.07.028 ↗
40. Thomas · 2007
41. The effect of copper slag on the hydration and mechanical properties of cementitious mixtures10.1016/S0008-8846(97)00166-X ↗
42. Alternative cap materials for evaluating the compressive strength of controlled low-strength materials10.1061/(ASCE)0899-1561(2003)15:5(484) ↗
43. N.A. Vincent, R. Shivashankar, K. Lokesh, J.M. Jacob, Laboratory electrical resistivity studies on cement stabilized soil, International Scholarly Research Notices, 2017.10.1155/2017/8970153 ↗
44. Investigation on electromagnetic and microwave absorption properties of copper slag-filled cement mortar10.1016/j.cemconcomp.2016.10.003 ↗
45. Estimation of the volume resistivity of electrically conductive composites10.1002/pc.10324 ↗
46. P. Xie, J.J. Beaudoin, Electrically conductive concrete and its application in deicing, ACI Special Publication SP-154, American Concrete Industry, 399–418, 1995.
47. Modeling of conductivity in carbon fiber-reinforced cement-based composite10.1007/s10853-010-4396-5 ↗
48. Fractional characteristics of coal fly ash for beneficial use10.1061/(ASCE)MT.1943-5533.0000550 ↗