journal article·2018-02Open access

Freeze thaw and deicer salt scaling resistance of concrete prepared with alkali aluminosilicate cement

Faris Matalkah, Parviz Soroushian

Abstract

Abstract Concrete materials were prepared with a cement based primarily on the alkali aluminosilicate chemistry. Two aspects of concrete performance were emphasized and compared against those of ordinary Portland cement (OPC) concrete: freeze-thaw durability, and deicer salt scaling resistance. Test results indicated that the concrete prepared with the alkali aluminosilicate cement (AAC) produced excellent freeze-thaw durability; its dicer salt scaling resistance, however, was lower than that provided by the OPC concrete. Efforts were made to improve the deicer salt scaling resistance of the AAC concrete through refinement of the AAC composition. The use of an air-entraining agent was found to enhance the deicer salt scaling resistance of the AAC concrete. Modification of the AAC chemistry with polyethylene glycol, tartaric acid, or a combination of sodium benzoate and triisopropanolamine was found to also improve the AAC concrete resistance to deicer salt scaling with minimal effect on compressive strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Smart Materials for Construction · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Behavior of air-entrained concrete after freeze-thaw cycles10.1016/S0894-9166(09)60273-1 ↗
2. Combined influence of freezing and deicing salt on concrete—physical aspects
3. Freezing and de-icing salt resistance of blast furnace slag concretes10.1016/S0958-9465(02)00052-5 ↗
4. Water transport in concrete damaged by tensile loading and freeze–thaw cycling10.1061/(ASCE)0899-1561(2006)18:3(424) ↗
5. Corrosion of rebar in concrete under cyclic freeze–thaw and chloride salt action10.1016/j.conbuildmat.2013.11.063 ↗
6. Geopolymer materials based on fly ash
7. Muntingh · 2006
8. Costs and carbon emissions for geopolymer pastes in comparison to ordinary Portland cement10.1016/j.jclepro.2011.02.010 ↗
9. Technical and commercial progress in the adoption of geopolymer cement10.1016/j.mineng.2011.09.009 ↗
10. The role of inorganic polymer technology in the development of ‘green concrete’10.1016/j.cemconres.2007.08.018 ↗
11. Synthesis and characterization of alkali aluminosilicate hydraulic cement that meets standard requirements for general use10.1016/j.conbuildmat.2017.10.002 ↗
12. Interactions of carbon-containing fly ash with commercial air-entraining admixtures for concrete10.1016/S0016-2361(96)00193-7 ↗
13. Effect of shrinkage-reducing admixtures on the properties of alkali-activated slag mortars and pastes10.1016/j.cemconres.2006.11.021 ↗
14. S. Beraldo, N. Montagner, A. Dal Bo, Alkali-activated aluminosilicate binder with superior freeze-thaw stability, Google Patents (US9242898 B2), 2016.
15. L. Jost, S. Gerhart, Z. Albert, Foaming agent for plaster and cement compositions, Google Patents (US3926650 A), 1975.
16. De-icing salt scaling resistance of mechanically loaded engineered cementitious composites10.1016/j.cemconres.2007.04.001 ↗
17. Deicer salt-scaling resistance of non-air-entrained roller-compacted concrete pavements10.1016/j.conbuildmat.2010.10.004 ↗
18. Alkali activated material–geopolymer
19. The durability characteristics of high performance concrete: a review10.1016/S0958-9465(02)00081-1 ↗
20. Freeze–thaw cycle test and damage mechanics models of alkali-activated slag concrete10.1016/j.conbuildmat.2010.12.006 ↗
21. Yang · 2004
22. Microstructure, crack propagation, and mechanical properties of cement pastes containing high volumes of fly ashes10.1016/0008-8846(95)00109-P ↗
23. Mechanisms of salt scaling10.1007/BF02482144 ↗
24. Mechanism for salt scaling of a cementitious surface10.1617/s11527-006-9104-1 ↗
25. Mechanisms of expansion of mortars containing reactive aggregate in NaCl solution10.1016/0008-8846(94)90186-4 ↗
26. Freeze–thaw damage and chemical change of a Portland cement concrete in the presence of diluted deicers10.1617/s11527-009-9557-0 ↗
27. Provis · 2009
28. Effect of hydration temperature on the solubility behavior of Ca-, S-, Al-, and Si-bearing solid phases in Portland cement pastes10.1016/S0008-8846(03)00224-2 ↗
29. M. Nedeljkovic, et al., Physical properties and pore solution analysis of alkali-activated fly ash-slag pastes, in: Proceedings pro113: International RILEM Conference Materials Systems and Structures in Civil Engineering (MSSCE 2016) on Concrete with Supplementary Cementitious Materials, 2016.
30. H. Szklorzová, V. Bílek, Influence of alkali ions in the activator on the performance of alkali-activated mortars, in: 3rd International Symposium on Non-traditional Cement and Concrete. Brno: Czech Republic, 2008.
31. Freeze-thaw durability of concrete with and without silica fume in ASTM C 666 (Procedure A) test method: internal cracking versus scaling10.1520/CCA10060J ↗
32. Mechanisms by which air-entraining agents affect viscositites and bleeding properties of cement pastes
33. The precision of the microscopical determination of the air-void system in hardened concrete10.1520/CCA10403J ↗
34. Influence of chloride solution concentration on deicer salt scaling deterioration of concrete
35. Mechanism for salt scaling10.1111/j.1551-2916.2006.00913.x ↗
36. Dynamic properties impact toughness and abrasiveness of polymer-modified pastes by using nondestructive tests10.1016/S0008-8846(03)00069-3 ↗
37. F. Ong, Method of delivery of agents providing freezing and thawing resistance to cementitious compositions, Google Patents (US7435766 B2), 2008.
38. Study on durability characteristics of conventional concrete with PEG-600 as self curing compound
39. Strength characteristics of self-curing concrete
40. Rai · 2006
41. Influence of Triisopropanolamine on the Physico-Chemical and Mechanical Properties of Pure Cement Pastes and Mortars
42. M. Ichikawa, M. Kanaya, S. Sano, Effect of triisopropanolamine on hydration and strength development of cements with different character, in: H. Justnes (Ed.), Proceedings 10th International Congress on the Chemistry of Cement, Gothenburg, Sweden, 1997.
43. On the mechanism of strength enhancement of cement paste and mortar with triisopropanolamine10.1016/j.cemconres.2003.11.018 ↗
44. Influence of tertiary alkanolamines on Portland cement hydration10.1111/j.1151-2916.1993.tb03934.x ↗
45. Hydration of ternary cement in the presence of triisopropanolamine10.1016/j.conbuildmat.2016.02.079 ↗
46. Use of non-wood biomass combustion ash in development of alkali-activated concrete10.1016/j.conbuildmat.2016.06.023 ↗
47. The effect of temperature on the geopolymerization process of a metakaolin-based geopolymer10.1016/j.matlet.2010.12.049 ↗
48. Effect of curing temperature on the development of hard structure of metakaolin-based geopolymer10.1016/j.conbuildmat.2009.12.023 ↗
49. Mechanical characterization of hybrid (organic-inorganic) geopolymers
50. Reactions in glass ionomer cements: V. Effect of incorporating tartaric acid in the cement liquid10.1177/00220345760550060401 ↗
51. Characterization of various cement grinding aids and their impact on grindability and cement performance10.1016/j.conbuildmat.2008.09.003 ↗
52. The influence of selected new generation admixtures on the workability, air-voids parameters and frost-resistance of self compacting concrete10.1016/j.conbuildmat.2011.12.107 ↗