journal article·2018-04

Study of innovative photocatalytic cement based coatings: The effect of supporting materials

V. Binas, D. Papadaki, Th. Maggos, A. Katsanaki, G. Kiriakidis

Publisher page

Abstract

Abstract For an ideal photocatalytic active building material, the substrate, on which the photocatalytic material is deposited, should neither interfere with nor affect its photocatalytic activity. In the present work, photocatalytic cement based coatings were immobilized on the surface of three different building substrates: gypsum, plywood and glass. The purpose was to investigate the effect of the substrates material on the photocatalytic activity of the corresponding end products against NO. In addition, the effect of the coatings composition and the selected illumination source (UV & Vis) on the material’s photocatalytic behavior was also studied. Results displayed a slightly higher photocatalytic activity for the cementitious coatings on the glass substrate compared to the ones obtained on gypsum and plywood substrates, Overall, both cement based coatings, with 5% w/w and 10% w/w photocatalyst (Mn doped TiO2), presented sufficient photocatalytic activity under either UV or Vis irradiation in the NO abatement. The latter (10% w/w) exhibited, as expected, a slightly better performance due to higher concentration, as monitored by the corresponding photocatalytic degradation rate parameters (n% and r) value.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Removal of low concentration nitrogen oxides through photoassisted heterogeneous catalysis10.1016/0304-5102(93)E0247-E ↗
2. Properties and performance of Pd based catalysts for catalytic oxidation of volatile organic compounds10.1016/S0926-3373(00)00258-7 ↗
3. Relationship between the local structures of titanium oxide photocatalysts and their reactivities in the decomposition of NO10.1021/jp012080e ↗
4. Photocatalytic oxidation of NOx using composite sheets containing TiO2 and a metal compound10.1016/S0045-6535(03)00049-3 ↗
5. TiO2 photocatalytic oxidation of nitric oxide: transient behavior and reaction kinetics10.1016/S1010-6030(03)00005-4 ↗
6. Maggos · 2007 · 585
7. Photocatalysis on TiO2 surfaces: principles, mechanisms and selected results10.1021/cr00035a013 ↗
8. Characterization of adsorbed species on TiO2 after photocatalytic oxidation of toluene10.1006/jcat.2001.3174 ↗
9. Measurement of benzene, toluene, ethylbenzeneabd o-xylene gas phase photodegradation by titanium dioxide dispersed in cementitious materials using a mixed flow reactor10.1016/j.apcatb.2005.04.009 ↗
10. Photocatalytic oxidation for indoor air purification: a literature review10.1016/S0360-1323(02)00212-3 ↗
11. Fujishima · 1999
12. NO removal efficiency of photocatalytic paving blocks prepared with recycled materials
13. Heterogeneous photocatalytic removal of toluene from air on building materials enriched with TiO210.1016/j.buildenv.2007.01.016 ↗
14. Photocatalytic degradation of NOx gases using TiO2-containing paint: a real scale study10.1016/j.jhazmat.2007.04.079 ↗
15. Photocatalytic degradation of NOx in a pilot street canyon configuration using TiO2-mortar panels10.1007/s10661-007-9722-2 ↗
16. Photocatalytic cementitious roads for depollution
17. Air purification by road materials: results of the test project in Antwerp
18. Brouwers, Indoor air purification using heterogeneous photocatalytic oxidation. Part I: experimental study10.1016/j.apcatb.2009.09.004 ↗
19. Conversion of nitrogen oxides on commercial photocatalytic dispersion paints
20. ISO 22197-1:2007e Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials Part 1: Removal of nitric oxide, 2007.
21. XP B44e011 French standard Photocatalyse e Méthoded‟essai pour l‟évaluation des matériauxphotocatalytiques vis-à-vis de la dégradation des NOx e Méthode à unseul passage en mode tangential, 2009.
22. Degradation of NO using photocatalytic coatings applied to different substrates10.1016/j.buildenv.2011.03.001 ↗
23. Synthesis and photocatalytic activity of Mn-doped TiO2 nanostructured powders under UV and visible light10.1016/j.apcatb.2011.11.021 ↗
24. Studies on photo-induced NO removal by Mn-doped TiO2 under indoor-like illumination conditions10.1016/j.jphotochem.2011.04.037 ↗
25. Biella, Photocatalytic NOx abatement: the role of the material supporting the TiO2 active layer10.1016/j.jhazmat.2011.10.095 ↗
26. Photocatalytic oxidation of nitrogen oxides on N-F-doped titania thin films10.1016/j.apcatb.2013.04.070 ↗
27. Continuous flow photocatalytic oxidation of nitrogen oxides over anodized nanotubular titania films10.1016/j.cej.2011.10.072 ↗
28. Two-dimensional chemical state plots: a standardized data set for use in identifying chemical states by X-ray photoelectron spectroscopy10.1021/ac50040a005 ↗
29. Alexander V. Naumkin, Anna Kraut-Vass, W. Stephen, Gaarenstroom, and Cedric J. Powell, National Institute of Standards and Technology (NIST) X-ray Photoelectron Spectroscopy Database, Version 4.1