Improving the progressive collapse resistance of long-span single-layer spatial grid structures
Source abstract
Abstract
Abstract The progressive collapse of long-span single-layer spatial grid structures, which are widely applied in public buildings, is a hot research topic in structural engineering. Four substructure experiments were conducted, and two types of failure were observed: strength and stability. Based on the experimental results, a numerical simulation using multi-scale technology was calibrated. A novel method including kinked steel pipe reinforcement and extra member reinforcement was proposed and validated by numerical simulation. Kinked steel pipe reinforcement is a local reinforcement method that prevents strength failure. The shape of the kinked steel pipe was determined through single-member analysis. Simulation results showed that the bearing capacity and deformation were improved simultaneously. The increase in the potential energy induced by member removal was absorbed into the strain energy. Extra member reinforcement is a global reinforcement method that prevents stability failure. Eigenvalue and nonlinear buckling analyses were adopted to locate the extra members. The extra member reinforcement was applied in the anti-collapse analysis of two typical domes. The results validated that extra member reinforcement is a powerful technique for resisting progressive collapse.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Response to Dynamic Loads · Transportation Safety and Impact Analysis · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. GSA, Alternate path analysis & design guidelines for progressive collapse resistance, General Services Administration, USA, 2013.
2. DoD, Design of building to resist progressive collapse, United facilities criteria (UFC), UFC 4-023-03, Department of Defense, USA, 2013.
3. Comparison of progressive collapse resistance of single-layer latticed domes under different loadings10.1016/j.jcsr.2016.11.012 ↗
4. Experimental study and numerical simulation of the progressive collapse resistance of single-layer latticed domes10.1061/(ASCE)ST.1943-541X.0001868 ↗
5. Mechanism of coupled instability of single-layer reticulated domes10.1016/j.engstruct.2016.02.005 ↗
6. Dynamic analysis method for the progressive collapse of long-span spatial grid structures10.12989/scs.2017.23.4.435 ↗
7. B.R. Ellingwood, R. Smilowitz, D.O. Dusenberry, D. Dutinh, H.S. Lew, N. Carino, Best practices for reducing the potential for progressive collapse in buildings, Department of Commerce, U.S.A. USA, 2007.10.6028/NIST.IR.7396 ↗
8. A novel kinked rebar configuration for simultaneously improving the seismic performance and progressive collapse resistance of RC frame structures10.1016/j.engstruct.2017.06.042 ↗
9. Special detailing techniques to improve structural resistance against progressive collapse10.1061/(ASCE)ST.1943-541X.0000886 ↗
10. Effect of reinforcing steel debonding on RC frame performance in resisting progressive collapse10.1016/j.hbrcj.2015.02.005 ↗
11. Investigation of precast RC beam-column assemblies under column-loss scenario10.1016/j.conbuildmat.2017.03.120 ↗
12. Three-dimensional progressive collapse analysis of reinforced concrete frame structures subjected to sequential column removal10.1016/j.engstruct.2016.11.018 ↗
13. A special reinforcing technique to improve resistance of beam-to-tubular column connections for progressive collapse prevention10.1016/j.engstruct.2016.03.012 ↗
14. Experimental testing and numerical modelling of steel moment-frame connections under column loss10.1016/j.engstruct.2017.08.068 ↗
15. Experimental study on impact behavior of strengthened beam-column connections of steel frames
16. A new mitigation scheme to resist progressive collapse of RC structures10.1016/j.conbuildmat.2016.08.084 ↗
17. Experimental study about composite frames under an internal column-removal scenario10.1016/j.jcsr.2016.03.001 ↗
18. Use of steel tendons in designing progressive collapse-resistant reinforced concrete frames10.1061/(ASCE)CF.1943-5509.0001011 ↗
19. Finite element modeling and capacity analysis of post-tensioned steel frames against progressive collapse10.1016/j.engstruct.2016.08.005 ↗
20. The effects of bracing on the behavior of RC multi-story frames to resist progressive collapse
21. Challenges and considerations for the retrofit of existing structures for progressive collapse10.1061/(ASCE)CF.1943-5509.0000675 ↗
22. Progressive collapse resistance of precast beam-column sub-assemblages with engineered cementitious composites10.1016/j.engstruct.2015.04.034 ↗
23. Strengthening of multibay reinforced concrete flat slabs to mitigate progressive collapse10.1061/(ASCE)ST.1943-541X.0001125 ↗
24. X.Z Lu, W.M. Yang, Numerical analysis for collapse response of a RC frame subjected to impact loading based on multi-scale model
25. Progressive collapse analysis of concrete-filled steel tubular column to steel beam connections using multi-scale model10.1016/j.istruc.2016.10.004 ↗
26. Anti-progressive collapse mechanism of long-span single-layer spatial grid structures10.1016/j.jcsr.2018.02.004 ↗
27. K.H. TAN. Dynamic performance of flush end-plate beam-column connections and design applications in progressive collapse10.1016/j.engstruct.2016.04.011 ↗