journal article·2018-05

Influence of calcined coal-series kaolin fineness on properties of cement paste and mortar

Yuanyuan Liu, Shaomin Lei, Min Lin, Zhangjie Xia, Zhenyu Pei, Bo Li

Publisher page

Abstract

Abstract Three calcined coal-series kaolin (CCK) samples, with same chemical and mineral composition but different fineness (Blaine specific surface of 760, 1369 and 1856 m 2 /kg), were used as pozzolan in cement paste and mortar and the influence of their fineness on materials properties was systematically studied by several methods and analyses. The pozzolanic activity of CCK is evaluated by Frattini test and confirmed by mechanical properties of blended mortars. TG–DSC analysis, complemented with XRD analysis, determines the type and the amount of hydrated phases at different ages to evaluate the influence of fineness on hydration properties of blended paste. Finally the microstructure of blended paste containing finer particles is observed by FESEM analysis. The results show that the finer particles have higher pozzolanic activity, leading to the more consumption of Ca(OH) 2 and the more production of additional C–S–H, C–A–H and C–A–S–H, which compact the paste and mortar texture and remarkably enhance the mechanical strength at later ages (after 7 days). The finer particles also have higher physical effect to accelerate the cement hydration and slightly increase mechanical strength, Ca(OH) 2 content and combined water at earlier ages (before 7 days).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Rock Mechanics and Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Effect of La2O3 additives on the strength and microstructure of mullite ceramics obtained from coal gangue and γ–Al2O310.1016/j.ceramint.2013.02.016 ↗
2. Assessment of pozzolanic activity of different calcined clays10.1016/j.cemconcomp.2013.01.002 ↗
3. Thermal analysis to assess pozzolanic activity of calcined kaolinitic clays10.1007/s10973-014-3816-1 ↗
4. Influence of metakaolin on the properties of mortar and concrete: a review10.1016/j.clay.2008.11.007 ↗
5. Thermal treatment of kaolin: effect on the pozzolanic activity10.1016/j.mspro.2012.06.046 ↗
6. Hydration reaction and hardening of calcined clays and related minerals. I. Preliminary investigation on metakaolinite10.1016/0008-8846(83)90109-6 ↗
7. Pore size distribution and degree of hydration of metakaolin–cement pastes10.1016/S0008-8846(00)00203-9 ↗
8. Properties of blended cements with thermally activated kaolin10.1016/j.conbuildmat.2008.02.008 ↗
9. Strength development of concretes incorporated with metakaolin and different types of calcined kaolins10.1016/j.conbuildmat.2012.07.077 ↗
10. Calcined kaolinite–bentonite clay blends as supplementary cementitious materials10.1016/j.clay.2015.01.025 ↗
11. Pozzolanic reactivity of low grade kaolinitic clays: Influence of calcination temperature and impact of calcination products on OPC hydration10.1016/j.clay.2015.01.028 ↗
12. Thermal treatment of kaolin: the effect of mineralogy on the pozzolanic activity10.1016/S0169-1317(01)00040-0 ↗
13. Assessment of pozzolanic activity of calcined coal–series kaolin10.1016/j.clay.2017.03.038 ↗
14. EN 196–5, Methods of Testing Cement. Part 5: Pozzolanicity Test for Pozzolanic Cement, Committee for European Standardization, Brussels, 2005.
15. ASTM C191–13, Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle.
16. ASTM C187–16, Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste.
17. Influence of metakaolin surface area on properties of cement–based materials10.1061/(ASCE)0899-1561(2007)19:9(762) ↗
18. EN 196–1, Methods of Testing Cement. Part 5: Determination of strength, Committee for European Standardization, Brussels, 2005.
19. The use of thermal analysis in assessing the effect of temperature on a cement paste10.1016/j.cemconres.2004.06.015 ↗
20. Metakaolin as a main cement constituent. Exploitation of poor Greek kaolins10.1016/j.cemconcomp.2004.02.007 ↗
21. Influence of sodium aluminate on cement hydration and concrete properties10.1016/j.conbuildmat.2014.04.089 ↗
22. Relative strength, pozzolanic activity and cement hydration in superplasticised metakaolin concrete10.1016/0008-8846(96)00148-2 ↗
23. Metakaolin and calcined clays as pozzolans for concrete: a review10.1016/S0958-9465(00)00092-5 ↗
24. Efficiency of mineral admixtures in mortars: quantification of the physical and chemical effects of fine admixtures in relation with compressive strength10.1016/j.cemconres.2005.07.001 ↗
25. Evaluation of the hydration of portland cement containing various carbonates by means of thermal analysis
26. Hydration and strength development in ternary portland cement blends containing limestone and fly ash or metakaolin10.1016/j.cemconcomp.2013.03.028 ↗
27. Investigation on early hydration of ternary Portland cement–blast–furnace slag–metakaolin blends10.1016/j.conbuildmat.2014.04.018 ↗
28. Clay content of argillites: influence on cement based mortars10.1016/j.clay.2008.09.009 ↗