Application-oriented mix design optimization and characterization of zeolite-based geopolymer mortars
Source abstract
Abstract
Abstract In the present study, geopolymer mortar samples (ZGM) were prepared based on natural zeolites in which the effect of the addition of the MCI-2005 NS migratory type corrosion inhibitor was also evaluated through the compressive strength. Additionally, the design of the mixture was optimized using; two alkaline activators (NaOH 14 M and Na2SiO3) in different proportions, river sand as fine aggregate, curing time and temperature. All ZGM samples were characterized using quantitative X-ray diffraction, SEM-EDS, simultaneous TGA-DSC analysis, FTIR spectrometry and compressive strength. The best mixture and curing temperature, corresponding to activator/zeolite: 0.5, Na2SiO3/NaOH: 3, and 60 °C, was identified by the highest mechanical strength obtained after 28 days of aging of the synthesized specimens, which reached 17 MPa. The zeolite-based geopolymer mortars prepared can be used in real life applications due to acceptable compressive strength obtained, and the use of MCI-2005 NS favors the compressive strength in ZGM specimens at an early age up to 14 days.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Corrosion and Durability · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Müller · 2008 · 1
2. Geopolymer materials based on natural zeolite
3. Kumar, Investigation on mechanical properties of fly ash-ground granulated blast furnace slag based self curing bio-geopolymer concrete10.1016/j.conbuildmat.2017.05.139 ↗
4. Preparation and characterisation of fly ash based geopolymer mortars10.1016/j.conbuildmat.2010.04.012 ↗
5. Characteristic study of geopolymer fly ash sand as a replacement to natural river sand10.1016/j.conbuildmat.2017.06.029 ↗
6. Alkali-activated ground granulated blast-furnace slag incorporating incinerator fly ash as a potential binder10.1016/j.conbuildmat.2016.02.153 ↗
7. Synthesizing one-part geopolymers from rice husk ash10.1016/j.conbuildmat.2016.08.017 ↗
8. Synthesis and characterization of geopolymer binders based on local materials from Burkina Faso – metakaolin and rice husk ash10.1016/j.conbuildmat.2016.07.102 ↗
9. Physical evolution of Na-geopolymer derived from metakaolin up to 1000 °C10.1007/s10853-006-0535-4 ↗
10. Selection and characterisation of geological materials for use as geopolymer precursors10.1179/1743676115Y.0000000055 ↗
11. An investigation of the effect of migratory type corrosion inhibitor on mechanical properties of zeolite-based novel geopolymers10.1016/j.molstruc.2017.06.066 ↗
12. Preparation, characterization and reaction kinetics of green cement: Ecuadorian natural mordenite-based geopolymers10.1617/s11527-017-1057-z ↗
13. Thermomechanical treatment of two Ecuadorian zeolite-rich tuffs and their potential usage as supplementary cementitious materials10.1007/s10973-013-3345-3 ↗
14. Hydration and strength evolution of air-cured zeolite-rich tuffs and siltstone blended cement pastes at low water-to-binder ratio10.1180/claymin.2015.050.1.12 ↗
15. Geopolymer cements and their properties: a review10.2478/brj-2014-0007 ↗
16. Alkali activated fly ashes: a cement for future10.1016/S0008-8846(98)00243-9 ↗
17. The geopolymerisation of alumino-silicate minerals10.1016/S0301-7516(99)00074-5 ↗
18. Geopolymer synthesis using alkaline activation of natural zeolite10.1016/j.conbuildmat.2010.04.052 ↗
19. Structure and properties of clay-based geopolymer cements: a review10.1016/j.pmatsci.2016.08.002 ↗
20. Zeolite mineralogy of the Cayo formation in Guayaquil, Ecuador10.1016/j.clay.2008.01.012 ↗
21. Zeolite occurrence and genesis in the Late-Cretaceous Cayo arc of Coastal Ecuador: evidence for zeolite formation in cooling marine pyroclastic flow deposits10.1016/j.clay.2013.10.018 ↗
22. Experimental investigation of the compressive and tensile strengths of geopolymer mortar: the effect of sand/fly ash (S/FA) ratio10.1016/j.conbuildmat.2016.10.030 ↗
23. ASTM D2487 · 2011
24. Influence of NaOH solution on the synthesis of fly ash geopolymer10.1016/j.mineng.2009.03.022 ↗
25. Effects of alkaline solution on properties of the HCFA geopolymer mortars10.1016/j.proeng.2016.06.581 ↗
26. Kinetics of geopolymerization: role of Al2O3 and SiO210.1016/j.cemconres.2007.01.003 ↗
27. ASTM C305-11 · 2011 · 1
28. ASTM C109, C109M-16a · 2016
29. Utilisation of waste material in geopolymeric concrete10.1680/coma.2011.164.6.315 ↗
30. Rietveld refinement strategy for quantitative phase analysis of partially amorphous zeolitized tuffaceous rocks
31. Early age hydration and pozzolanic reaction in natural zeolite blended cements: reaction kinetics and products by in situ synchrotron X-ray powder10.1016/j.cemconres.2010.08.012 ↗
32. Thermal properties of novel binary geopolymers based on metakaolin and alternative silica sources10.1016/j.clay.2015.10.005 ↗
33. Fresh properties, mechanical strength and microstructure of fly ash geopolymer paste reinforced with sawdust10.1016/j.conbuildmat.2016.02.091 ↗
34. Compressive strength and microstructure of fl y ash based geopolymer blended with silica fume under thermal cycle10.1016/j.cemconcomp.2017.01.009 ↗
35. Attenuated total reflectance fourier transform infrared analysis of fly ash geopolymer gel
36. Mid-infrared spectroscopic studies of alkali-activated fly ash structure10.1016/j.micromeso.2005.05.057 ↗
37. Characterization of the high-calcium fly ash geopolymer mortar with hot-weather curing systems for sustainable application10.1016/j.apt.2017.06.013 ↗
38. Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastes10.1016/j.jhazmat.2008.12.121 ↗
39. Synthesis of fly ash based geopolymer mortar considering different concentrations and combinations of alkaline activator solution10.1016/j.ceramint.2017.10.071 ↗
40. Effect of concentration of sodium hydroxide and degree of heat curing on fly ash-based geopolymer mortar10.1155/2014/938789 ↗
41. Activating process of geopolymer source material: Kaolinite10.1007/s11595-009-1132-6 ↗
42. Fly ash-based geopolymer: clean production, properties and applications10.1016/j.jclepro.2016.03.019 ↗
43. Geopolymer from kaolin in China: an overview10.1016/j.clay.2015.04.023 ↗
44. The effects of Na2O/SiO2 molar ratio, curing temperature and age on compressive strength, morphology and microstructure of alkali-activated fly ash-based geopolymers10.1016/j.cemconcomp.2011.03.006 ↗
45. Mechanical and microstructural properties of alkali-activated fly ash geopolymers10.1016/j.jhazmat.2010.04.064 ↗
46. Combination formation in the reinforcement of metakaolin geopolymers with quartz sand10.1016/j.cemconcomp.2017.03.005 ↗
47. Effect of cesium substitution on the thermal evolution and ceramics formation of potassium-based geopolymer10.1016/j.ceramint.2010.07.015 ↗
48. New cements for the 21st century: the pursuit of an alternative to Portland cement10.1016/j.cemconres.2011.03.016 ↗
49. Compressive strength and microstructural characteristics of class C fly ash geopolymer10.1016/j.cemconcomp.2009.11.003 ↗
50. Utilisation of fly ash in a geopolymeric material10.1016/S0883-2927(02)00005-7 ↗
51. Mineralogical and geochemical characterization of natural zeolites from southwest Syria10.1007/s12517-014-1519-3 ↗