journal article·2018-07

The effect of heating and cooling on the bond strength between concrete and steel reinforcement bars with and without epoxy coating

Jaesung Lee, Evan Sheesley, Yuxiang Jing, Yunping Xi, Kaspar Willam

Publisher page

Abstract

Abstract The purpose of this study is to investigate the temperature effects on the bond strength between concrete and steel reinforcement bars. For two different steel bars (epoxy-coated and uncoated bars), three experimental parameters (heating rate, target temperature, and cooling condition) are examined. At a target temperature of 200 °C, the epoxy-coated rebar has much higher bond strength than the uncoated rebar. However, in the specimens exposed to target temperatures higher than 200 °C, the test results show that the epoxy coated rebar has less bond strength than the uncoated rebar. Also, the test results demonstrated that as the heating rate and target temperature increase the bond strength decreases. The cooling method does not affect the ultimate bond stress of the specimens using uncoated rebar very much but can greatly affect specimens that contained epoxy coated rebar. A more in-depth study can be considered regarding the cooling effect on the bond strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fire effects on concrete materials · Concrete Corrosion and Durability · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Bond behavior of fiber reinforced polymer bars under direct pullout conditions10.1061/(ASCE)1090-0268(2004)8:2(173) ↗
2. P. Bartos, Bond in concrete, in: International Conference on Bond in Concrete, June 14–16. 198, pp. 205–216.
3. Time-temperature analysis of bond strength of rebar after fire exposure10.1016/S0008-8846(03)00139-X ↗
4. Bond strength at high temperatures10.1680/macr.1981.33.115.75 ↗
5. Bond shear modulus of reinforced concrete at high temperatures10.1016/S0013-7944(96)00049-5 ↗
6. Effect of thermal variations on bond strength of fusion-bonded epoxy-coated bars10.1520/CCA10450J ↗
7. The anchorage capacity of reinforcing bars at normal and high temperatures10.1680/macr.1982.34.121.213 ↗
8. Direct measurement of slip between steel and concrete
9. Pullout tests of epoxy coated bars at high temperatures
10. Concrete-steel bond model for use in finite element modeling of reinforced concrete structures
11. Response of the bond in reinforced concrete to high temperatures10.1680/macr.1983.35.123.67 ↗
12. Recommendations for bond tests on reinforced bars
13. Experimental evaluation of the direct tension – pullout bond test, Bond in concrete – from research to standards
14. Properties of concrete after high temperature heating and cooling