journal article·2018-08

Assessment of the shear behaviour of polyolefin fibre reinforced concrete and verification by means of digital image correlation

A. Picazo, J.C. Gálvez, M.G. Alberti, A. Enfedaque

Publisher page

Abstract

Abstract Given that remarkable structural applications of fibre reinforced concrete have been successfully developed in the last 60 years, modern concrete codes and fib Model Code have included requirements and formulations for considering the fibre contributions in structural design. In recent times, polyolefin fibre reinforced concrete (PFRC) has been shown as an attractive alternative to steel fibres, with it being chemically stable and having a lower dosage in terms of weight to reach similar residual strengths. It is worth noting that fibre contributions are attained from flexural tensile strengths tests. However, one of the major contributions provided by fibres in rebar substitutions has involved use in replacing shear stirrups. In such a sense, while the use of steel fibres has been shown as effective there is a lack of published literature with regard to PFRC. In this study, push-off tests in specimens obtained from the remaining halves after three-point bending tests have been performed. In addition to the mechanical results obtained, digital image correlation has allowed the cracking processes of the specimens to be identified. This paper offers a significant contribution to the field, given that it relies on the assessment of the shear contributions of polyolefin fibres and comparison with the requirements of the existing codes. Moreover, it supplies notable information about residual shear strengths and the cracking processes that take place.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Reinforcement optimization of fiber reinforced concrete linings for conventional tunnels10.1016/j.compositesb.2013.10.012 ↗
2. Application of high performance polypropylene fibers in concrete lining of water tunnels10.1016/j.matdes.2013.09.075 ↗
3. Structural cast-in-place SFRC: technology, control criteria and recent applications in spain10.1617/s11527-009-9540-9 ↗
4. First ultra-high-performance fibre-reinforced concrete footbridge in spain: design and construction10.2749/101686614X13830788505793 ↗
5. Fibre reinforced cement-based (FRC) composites after over 40 years of development in building and civil engineering10.1016/j.compstruct.2008.03.006 ↗
6. Fiber reinforced concrete properties
7. On the mechanical properties and fracture behavior of polyolefin fiber-reinforced self-compacting concrete10.1016/j.conbuildmat.2014.01.024 ↗
8. Mechanical properties of a large scale synthetic fibre reinforced concrete ground slab10.1016/j.conbuildmat.2012.11.043 ↗
9. Plastic fibres as the only reinforcement for flat suspended slabs: parametric study and design considerations10.1016/j.conbuildmat.2014.07.091 ↗
10. Fracture mechanics of polyolefin fibre reinforced concrete: study of the influence of the concrete properties, casting procedures, the fibre length and specimen size10.1016/j.engfracmech.2015.12.032 ↗
11. Use of macro plastic fibres in concrete: a review10.1016/j.conbuildmat.2015.05.105 ↗
12. D. Wimpenny, W. Angerer, T. Cooper, S. Bernard, The use of steel and synthetic fibres in concrete under extreme conditions, in: 24th Biennial Conference of the Concrete Institute of Australia, Sydney, Australia, 2009.
13. Investigation of fiber distribution in concrete batches discharged from ready-mix truck10.1007/s40069-014-0083-2 ↗
14. Fiber reinforced concrete: an overview after 30 years of development10.1016/S0958-9465(96)00046-7 ↗
15. Distribution and orientation of fibers in steel fiber reinforced concrete
16. Reliability of polyolefin fibre reinforced concrete beyond laboratory sizes and construction procedures10.1016/j.compstruct.2015.12.068 ↗
17. On the prediction of the orientation factor and fibre distribution of steel and macro-synthetic fibres for fibre-reinforced concrete
18. MC2010 · 2010
19. EHE-08 · 2008
20. Characterization of the orientation profile of steel fiber reinforced concrete10.1617/s11527-010-9686-5 ↗
21. Simple tools for fiber orientation prediction in industrial practice10.1016/j.cemconres.2011.05.008 ↗
22. Flexural performance of fibre reinforced concrete made with steel and synthetic fibres10.1016/j.conbuildmat.2012.06.042 ↗
23. Fibre distribution and orientation of macro-synthetic polyolefin fibre reinforced concrete elements10.1016/j.conbuildmat.2016.06.083 ↗
24. M. Alberti, A. Enfedaque, J. Gálvez, Polyolefin-based fibres and combination with steel fibres: seeking a more sustainable structural concrete, in: de II International Conference on Concrete Sustainability ICCS16, Madrid, 2016.
25. Plastic fibres as the only reinforcement for flat suspended slabs: experimental investigation and numerical simulation10.1016/j.conbuildmat.2014.01.082 ↗
26. Structural cast-in-place application of polyolefin fiber–reinforced concrete in a water pipeline supporting elements10.1061/(ASCE)PS.1949-1204.0000274 ↗
27. Test and design methods for steel fibre reinforced concrete: bending test (final recommendation)10.1617/13884 ↗
28. ASTM C 1609/C 1690M-07 · 2007 · 1
29. EN 14651:2007+A1 · 2007
30. Application of constitutive models in European codes to RC–FRC10.1016/j.conbuildmat.2012.09.096 ↗
31. S.C. Lee, J.Y. Cho, F.J. Vecchio, Constitutive model for steel fibre reinforced concrete in tension, in: de Proc. of the VIII International Conference on Fracture Mechanics of Concrete and Concrete Structures (FraMCoS-8), Toledo, 2013.
32. Pull-out behaviour and interface critical parameters of polyolefin fibres embedded in mortar and self-compacting concrete matrixes10.1016/j.conbuildmat.2016.02.128 ↗
33. Numerical modelling of the fracture of polyolefin fibre reinforced concrete by using a cohesive fracture approach
34. Barragán · 2002
35. Steel and synthetic fibers as shear reinforcement
36. Shear strength of steel fiber-reinforced ultrahigh-performance concrete beams without stirrups10.1061/(ASCE)ST.1943-541X.0000234 ↗
37. Shear behavior of macro-synthetic fiber-reinforced concrete beams without stirrups
38. Shear behaviour of steel fibre reinforced concrete beams10.1007/BF02479300 ↗
39. Cuenca · 2012
40. The fundamental behaviour of reinforced concrete beams in bending and shear
41. Fiber synergy in hybrid fiber reinforced concrete (HyFRC) in flexure and direct shear10.1016/j.cemconcomp.2013.10.018 ↗
42. Are steel fibres able to mitigate or eliminate size effect in shear?10.1617/s11527-013-0072-y ↗
43. Influence of concrete matrix and type of fiber on the shear behavior of self-compacting fiber reinforced concrete beams10.1016/j.compositesb.2015.01.037 ↗
44. Shear strength of steel fiber-reinforced concrete
45. High performance fiber reinforced concrete for the shear reinforcement: experimental and numerical research10.1016/j.conbuildmat.2014.12.003 ↗
46. Zeranka · 2017
47. Shear resistance of ultra-high-performance fiber-reinforced concrete10.1016/j.conbuildmat.2017.06.079 ↗
48. Experimental analysis of cement-based materials under shear stress10.1016/j.conbuildmat.2018.03.050 ↗
49. Shear behavior of self-compacting concrete and fiber-reinforced concrete push-off specimens
50. A crack-shear slip model of high-strength steel fiber-reinforced concrete based on a push-off test10.1016/j.conbuildmat.2016.09.080 ↗
51. Echegaray · 2014
52. Picazo · 2017 · 405
53. F. Suárez, Estudio de la rotura en barras de acero. Aspectos experimentales y numéricos (Tesis doctoral), Madrid, 2013.
54. Use of the digital image correlation and acoustic emission technique to study the effect of structural size on cracking of reinforced concrete10.1016/j.engfracmech.2015.06.038 ↗
55. Paradigms of shear in structural concrete-review and experimental verification
56. Shear behavior of steel fiber reinforced concrete using full-field displacements from digital image correlation10.1051/matecconf/201712004003 ↗
57. Experimental accuracy of two dimensional strain measurements using digital image correlation10.1016/j.engstruct.2012.08.018 ↗
58. Restraining brittleness in polyolefin fibre reinforced concrete: advanced properties by means of a modest concrete matrix
59. Comparison between polyolefin fibre reinforced vibrated conventional concrete and self-compacting concrete10.1016/j.conbuildmat.2015.03.007 ↗
60. EN 12390-3 · 2009
61. EN 12390-6 · 2009
62. EN 12390-13 · 2013
63. «In-plane strain measurement by digital image correlation,» Soc
64. Experimental investigation on the shear capacity of prestressed concrete beams using digital image correlation10.1016/j.engstruct.2014.10.034 ↗
65. EN 14889-2 · 2008
66. M. di Prisco, G. Plizzari, L. Vandewalle, MC2010: Overview on the shear provisions for FRC, fib 57 (2010) 61–76.10.35789/fib.BULL.0057.Ch04 ↗