journal article·2018-09

Study on the structure and properties of autoclaved aerated concrete produced with the stone-sawing mud

Huiwen Wan, Yong Hu, Gang Liu, Yuan Qu

Publisher page

Abstract

Abstract The mineral composition of the stone-sawing mud is mainly quartz, containing a small amount of sodium feldspar and potassium feldspar. It could be instead of river sand to be used for preparation of the autoclaved aerated concrete (AAC). The results showed that under the same condition, the porosity rate of the AAC with stone sawing mud and river sand was 73.3% and 74.6% respectively. The average pore size was 0.82 mm and 0.95 mm respectively. The AAC prepared with stone sawing mud and river sand have good thermal insulation performance with the thermal conductivity of 0.14 W/(m·K). As the amount of stone sawing mud replacing the river sand increased gradually, the bulk density and the compressive strength of the AAC were gradually increased. The X-ray diffraction (XRD) and scanning electron microscope (SEM) showed that the amount of hydrated products of the tobermorite and the calcium silicate hydrates (C-S-H) in the AAC with stone-sawing mud were more than that in the AAC with the river sand. The crystallization of tobermorite crystals in the AAC with the stone-sawing mud grew into a leaf shape, and interleaved with each other to form a dense structure net, which made the AAC with improved mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Building materials and conservation · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Incorporation of wastes from granite rock cutting and polishing industries to produce roof tiles10.1016/j.jeurceramsoc.2008.05.045 ↗
2. Structure and properties of aerated concrete: a review10.1016/S0958-9465(00)00016-0 ↗
3. İlker Bekir Topçu. Utilization of natural zeolite in aerated concrete production10.1016/j.cemconcomp.2009.10.002 ↗
4. Autoclaved aerated concrete incorporating waste aluminum dust as foaming agent10.1016/j.conbuildmat.2017.05.047 ↗
5. Utilization of iron tailings as substitute in autoclaved aerated concrete: physico-mechanical and microstructure of hydration products10.1016/j.jclepro.2016.03.172 ↗
6. Preparation of autoclaved aerated concrete using copper tailings and blast furnace slag10.1016/j.conbuildmat.2011.08.034 ↗
7. Experimental research on aerated concrete preparation with low-silicon tailings of copper mine
8. Effect of perlite waste addition on the properties of autoclaved aerated concrete10.1016/j.conbuildmat.2016.05.019 ↗
9. Preparation and properties of autoclaved aerated concrete using coal gangue and iron ore tailings10.1016/j.conbuildmat.2015.12.041 ↗
10. Properties of autoclaved aerated concrete incorporating rice husk ash as partial replacement for fine aggregate10.1016/j.cemconcomp.2014.07.021 ↗
11. Autoclaved aerated concrete based on fly ash in density 350 kg/m3, as an environmentally friendly material for energy-efficient constructions10.1016/j.proeng.2015.10.005 ↗
12. Impact of complex additive consisting of continuous basalt fibres and SiO2, microdust on strength and heat resistance properties of autoclaved aerated concrete10.1016/j.conbuildmat.2013.10.027 ↗
13. Research progress on the structure of autoclaved gas concrete pore structure and its effect on performance
14. Application of automatic image analysis for the investigation of autoclaved aerated concrete structure10.1016/0008-8846(94)90003-5 ↗
15. Statistical modeling of the geometrical structure of the system of artificial air pores in autoclaved aerated concrete10.1016/j.cemconres.2004.10.010 ↗
16. Thermal insulation performance of aerated concrete and its guarantee measures
17. Thermal inertia properties of autoclaved aerated concrete10.1061/(ASCE)0733-9402(1999)125:2(59) ↗
18. Relations between structure and mechanical properties of autoclaved aerated concrete10.1016/0008-8846(79)90049-8 ↗
19. The carbonation of autoclaved aerated concrete10.1016/S0008-8846(97)00024-0 ↗
20. Wang Xiu-fen, Experimental Study on Performance and Optimization of Aerated Concrete, 2006, Xi'an University Of Architecture and Technology, in Chinese.
21. Sun Bao-zhen, Li Guang-cai, Jia Chuan-jiu, The relationship between the hydration products of autoclaved aerated concrete and its strength and shrinkage, J. Portland, 1, 1983, 79-86+134–136 (in Chinese).
22. Influence of quartz particle size on the chemical and mechanical properties of autoclaved aerated concrete (I) tobermorite formation10.1016/0008-8846(95)00003-8 ↗
23. Types and microstructure of hydration products of fly ash aerated concrete
24. Influence of SiO2, modification on hydrogarnets formation during hydrothermal synthesis10.1016/S0008-8846(03)00200-X ↗
25. Hydrogarnet formation during autoclaving at 180°C in unstirred matakaolin-lime-quartz slurries10.1016/S0008-8846(98)00088-X ↗
26. Analysis, characterization and mechanism of formation and transformation of autoclaved water garnet
27. Effects of quartz particle size on hydrogarnet formation during autoclaving at 180 degrees C in the CaO-Al2O3-SiO2-H2O system10.1016/S0008-8846(98)00112-4 ↗