journal article·2018-09

Application of a PCM-rich concrete overlay to control thermal induced curling stresses in concrete pavements

Naser P. Sharifi, Kamyar C. Mahboub

Publisher page

Abstract

Abstract This study aims to evaluate the application of a Phase Change Material (PCM) rich concrete overlay to reduce curling stresses in concrete pavements. Curling stresses are the results of temperature gradient in pavements, and are comparable to the stresses that are induced by traffic loads. The weather conditions, which have a cyclic nature, are the source of curling stresses, and they cause cyclic tensile and compressive stresses in pavements. This phenomenon causes fatigue damage in concrete pavements and reduces their service life. The PCMs have a high latent heat of fusion and can increase the thermal inertia of concrete. When PCM is used in a concrete overlay, it tends to moderate the temperature gradient in the slab, and thus mitigate the curling stresses. The efficiency of the proposed PCM-rich overlay was evaluated under the real climatic conditions of three different cities in the US. The findings of this research demonstrated that the cumulative fatigue Damage Index (DI) resulted from repetitive curling stresses can be up to 22% in a concrete slab with the service life of 35 years. However, using a 7.6 cm bonded concrete overlay with 25 vol% PCM can moderate the curling stresses so much that the effect of curling induced fatigue damage would be virtually negligible.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Smart Materials for Construction · Asphalt Pavement Performance Evaluation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Review on thermal energy storage with phase change materials (PCMs) in building applications10.1016/j.apenergy.2011.08.025 ↗
2. Potential applications of phase change materials in concrete technology10.1016/j.cemconcomp.2007.04.007 ↗
4. Review on thermal energy storage with phase change: materials, heat transfer analysis and applications10.1016/S1359-4311(02)00192-8 ↗
5. Application of lightweight aggregate and rice husk ash to incorporate phase change materials into cementitious materials10.1080/21650373.2016.1207576 ↗
6. Application of phase change materials in gypsum boards to meet building energy conservation goals10.1016/j.enbuild.2016.12.046 ↗
7. Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency10.1016/j.enbuild.2012.12.042 ↗
8. Kosny · 2010
9. Effect of phase-change materials on thermal and mechanical properties of asphalt mixtures10.1520/JTE20120091 ↗
10. Evaluating the use of phase change materials in concrete pavement to melt ice and snow10.1061/(ASCE)MT.1943-5533.0001439 ↗
11. Optimization of phase change materials used in asphalt pavement to prevent rutting
12. B. Guan, B. Ma, F. Qin, Application of asphalt pavement with phase change materials to mitigate urban heat island effect, in: Water Resource and Environmental Protection (ISWREP), 2011 International Symposium on 2011. IEEE.10.1109/ISWREP.2011.5893749 ↗
13. Development and testing of PCM doped cool colored coatings to mitigate urban heat island and cool buildings10.1016/j.buildenv.2010.09.003 ↗
14. Nonlinear FE analysis of plain concrete pavements with doweled joints10.1061/(ASCE)0733-947X(1993)119:5(763) ↗
15. H.T. Yu, L. Khazanovich, M.I. Darter, Consideration of JPCP curling and warping in the 2002 design guide, in: 83rd Annual Meeting of the Transportation Research Board, Washington, DC, 2004.
16. Evaluation of temperature responses in concrete pavement10.1061/(ASCE)0733-947X(2004)130:3(395) ↗
17. K.C. Mahboub, D.L. Allen, Y. Liu, A 3-D Finite Element Structural Model of an Instrumental Rigid Pavement (I-265 Gene Snyder Freeway, Louisville, Kentucky), 2002.
18. Typical Meteorological Year, Available from: .
19. D.P. Bentz, A computer model to predict the surface temperature and time-of-wetness of concrete pavements and bridge decks, 2000.10.6028/NIST.IR.6551 ↗
20. Pavement surface maximum temperature increases linearly with solar absorption and reciprocal thermal inertial10.1016/j.ijheatmasstransfer.2016.02.032 ↗
21. Calculation of maximum pavement temperatures from weather reports
22. Numerical analysis of the freeze-thaw performance of cementitious composites that contain phase change material (PCM)10.1016/j.matdes.2018.02.056 ↗
23. Carman · 1921
24. Using COMSOL modeling to investigate the efficiency of PCMs at modifying temperature changes in cementitious materials–case study10.1016/j.conbuildmat.2015.10.162 ↗
25. State of California Department of Transportation, Concrete Pavement Guide, 2015.
26. Application of phase change materials to improve the thermal performance of cementitious material10.1016/j.enbuild.2015.06.040 ↗
27. Review on thermal energy storage with phase change materials and applications10.1016/j.rser.2007.10.005 ↗
28. Combined effect of traffic loads and thermal gradients on concrete pavement design
29. Analysis of concrete pavement responses to temperature and wheel loads measured from intrumented slabs10.3141/1639-10 ↗
30. Enhanced portland cement concrete fatigue model for streetpave10.1177/0361198105191900104 ↗
31. R.G. Packard, S.D. Tayabji, New PCA thickness design procedure for concrete highway and street pavements, in: Third International Conference on Concrete Pavement Design and RehabilitationPurdue University; Federal Aviation Administration; and Indiana Department of Highways, 1985.
32. Fatigue analysis of plain concrete in flexure10.1061/(ASCE)0733-9445(1986)112:2(273) ↗
33. A study of the applicability to the fatigue of concrete of the Palmgren-Miner partial damage hypothesis10.1680/macr.1977.29.100.123 ↗
34. Increasing the service life of bridge decks by incorporating phase-change materials to reduce freeze-thaw cycles10.1061/(ASCE)MT.1943-5533.0000381 ↗
35. Phase change materials for building applications: a state-of-the-art review10.1016/j.enbuild.2010.03.026 ↗
36. K. Smith, et al., Concrete Pavement Preservation Guide, 2014.
37. L.B. Heckel, Performance of an unbonded concrete overlay on I-74, 2002.
38. Age-dependent properties of fiber-reinforced concrete for thin concrete overlays10.1016/j.conbuildmat.2017.01.097 ↗
39. Twenty-year performance of latex-modified concrete overlays
40. Incorporation of phase change materials in cementitious systems via fine lightweight aggregate10.1016/j.conbuildmat.2012.04.042 ↗
41. Thermodynamics and performance evaluation of encapsulated PCM-based energy storage systems for heating application in building10.1007/s10973-013-3215-z ↗
42. An overview of the fatigue behaviour of plain and fibre reinforced concrete10.1016/S0958-9465(02)00139-7 ↗
43. Y.H. Huang, Pavement analysis and design. 2004.