Study of alkali activated slag as alternative pavement binder
Source abstract
Abstract
Abstract The sustainable development of the building sector is an important concern of the public, industry and governments. One way to reduce the ecological footprint is to use building materials with less energy consumption and lower CO2 emissions. In this study, a clinker-free cementitious binder was synthesized through an alkali activation of ground granulated blast furnace slag. Flexural and compressive strength of the resulting alkali activated slag (AAS) were measured and compared with ordinary Portland cement (OPC). The Aachen Polishing Machine (APM) equipped with real vehicle tires and a British pendulum tester was applied to assess the skid resistance of AAS and OPC after polishing. Reaction products were documented using the X-ray Diffraction (XRD) technique to explore the reaction mechanism. In addition, the equivalent CO2 emission of AAS production was calculated to evaluate its environmental impact. Results show that the AAS possesses comparable after polishing skid resistance to OPC, but higher flexural strength and lower equivalent CO2 emission. All these demonstrate that AAS can be used as an environmentally friendly alternative binder for concrete pavement construction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Evaluating skid resistance of different asphalt concrete mixes10.1016/j.buildenv.2005.08.020 ↗
2. ASTM E303-93, 2013. Standard test method for measuring surface frictional properties using the British pendulum tester, West Conshohocken, Pennsylvania, US.
3. Austroads, Guide to pavement technology part 3: pavement surfacings 2009 Sydney
4. A review of early-age properties of cement-based materials10.1016/j.cemconres.2007.09.005 ↗
5. Alkali-activated materials: cementing a sustainable future
6. LCA allocation procedure used as an incitative method for waste recycling: an application to mineral additions in concrete10.1016/j.resconrec.2010.04.001 ↗
7. Delatte · 2008
8. DIN EN 196-1 · 2016
9. Pavement polishing—Development of a dedicated laboratory test and its correlation with road results10.1016/j.wear.2006.12.086 ↗
10. Evolution of road-surface skid-resistance and texture due to polishing10.1016/j.wear.2008.04.060 ↗
11. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
12. Alkali-activated slag mortars: mechanical strength behaviour10.1016/S0008-8846(99)00154-4 ↗
13. FGSV 401 · 2012
14. Greenhouse gas emissions due to concrete manufacture10.1065/lca2007.05.327 ↗
15. An environmental evaluation of geopolymer based concrete production: reviewing current research trends10.1016/j.jclepro.2011.03.012 ↗
16. J. Haufe, J. Stindt, G. Ferrari A. Vollpracht, Use of Re-Con Zero for concrete containing admixtures, 2016, Lyon, France.
17. Comparison of environmental implications of asphalt and Steel-reinforced concrete pavements10.3141/1626-13 ↗
18. Influence of aggregates’ spatial characteristics on air-voids in asphalt mixture10.1080/14680629.2017.1279072 ↗
19. O. Ivanova, The role of transport infrastructure in regional economic development, 2003, Oslo.
20. JTGF30 · 2003
21. Resistance of alkali-activated slag mortar to abrasion and fire10.1680/adcr.2011.23.6.289 ↗
22. Mechanism of geopolymerization and factors influencing its development: a review10.1007/s10853-006-0401-4 ↗
23. Pavement friction and skid resistance measurement methods: a literature review
24. Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement10.1016/j.jclepro.2011.02.010 ↗
25. Strength performance of alkali activated slag concrete withcopper slag as fine aggregate exposed to elevated temperatures
26. Flexural fatigue performance of alkali activated slag concrete mixes incorporating copper Slag as fine aggregate
27. The crystal structure of tricalcium aluminate Ca3Al2O610.1107/S0567740875003639 ↗
28. The Al6O18 rings of tetrahedra in the structure of Ca8,5 NaAl6O1810.1107/S0567740875004736 ↗
29. Tricalcium silicate Ca3SiO5 superstructure analysis: a route towards the structure of the M1 polymorph10.1524/zkri.2012.1425 ↗
30. A review of sustainable supplementary cementitious materials as an alternative to all-portland cement mortar and concrete
31. Alkali-activated binders: a review. Part 2. About materials and binders manufacture10.1016/j.conbuildmat.2007.03.019 ↗
32. Geopolymers and related alkali-activated materials10.1146/annurev-matsci-070813-113515 ↗
33. Provis · 2014
34. Advances in understanding alkali-activated materials10.1016/j.cemconres.2015.04.013 ↗
35. A model for the C-A-S-H gel formed in alkali-activated slag cements10.1016/j.jeurceramsoc.2011.04.036 ↗
36. The calcium silicate hydrates10.1016/j.cemconres.2007.11.005 ↗
37. Quantification of phases with partial or no known crystal structures10.1154/1.2362855 ↗
38. TC 238-SCM: hydration and microstructure of concrete with SCMs10.1617/s11527-015-0527-4 ↗
39. Shi · 2006
40. T. Smith, S. Tighe, R. Fung, Concrete pavements in Canada: a review of their usage and performance. Annual conference and exhibition of the transportation association of Canada, 2001.
41. Quantification of supplementary cementitious content in blended Portland cement using an iterative Rietveld-PONKCS technique10.1107/S1600576717002965 ↗
42. Isothermal calorimetry and in-situ XRD study of the NaOH activated fly ash, metakaolin and slag10.1016/j.cemconres.2017.10.004 ↗
43. P. Taylor, S. Kosmatka, G. Voigt, Integrating Materials and Construction Practices for Concrete Pavements: A State-of-the-Practice Manual 2006 Ames Iowa.
44. Tayabji · 2010
45. Road surface roughness and the properties of aggregates (in French)
46. Carbon dioxide equivalent (CO2-e) emissions: a comparison between geopolymer and OPC cement concrete10.1016/j.conbuildmat.2013.01.023 ↗
47. T. van Dam, P. Taylor, Building Sustainable Pavements with Concrete 2009 Ames Iowa, US.
48. T. van Dam, P. Taylor, G. Fick, D. Gress, M. Van Geem, E. Lorenz, Sustainable Concrete Pavement, 2012 Ames, Iowa, US.
49. Binding and leaching of trace elements in Portland cement pastes10.1016/j.cemconres.2015.08.002 ↗
50. Hydration products of alkali activated slag cement10.1016/0008-8846(95)00045-E ↗
51. Influence of different polishing conditions on the skid resistance development of asphalt surface10.1016/j.wear.2013.09.013 ↗
52. Study of micro-texture and skid resistance change of granite slabs during the polishing with the aachen polishing machine10.1016/j.wear.2014.06.005 ↗
53. Multi-scale study of the polishing behaviour of quartz and feldspar on road surfacing aggregate
54. Modeling and testing of road surface aggregate wearing behaviour10.1016/j.conbuildmat.2016.11.075 ↗
55. Evaluation of the polishing resistance characteristics of fine and coarse aggregate for asphalt pavement using Wehner/Schulze test10.1016/j.conbuildmat.2017.12.147 ↗
56. Development of morphological properties of road surfacing aggregates during the polishing process10.1080/10298436.2015.1088153 ↗
57. Quantification of the extent of reaction of metakaoli-based geopolymers using X-ray diffraction, scanning electron microscopy, and energy-dispersive spectroscopy10.1111/j.1551-2916.2011.04410.x ↗
58. Predicting the skid resistance of concrete
59. Durability of green high performance alkali-activated slag pavement concrete10.4028/www.scientific.net/AMM.99-100.158 ↗
60. Toward an indexing approach to evaluate fly ashes for geopolymer manufacture10.1016/j.cemconres.2016.04.007 ↗