journal article·2018-11

Microscopic hydric characterization of hemp concrete by X-ray microtomography and digital volume correlation

Fares Bennai, Chady El Hachem, Kamilia Abahri, Rafik Belarbi

Publisher page

Abstract

Abstract Hemp concrete is a bio-based material used in buildings construction. It presents particularly interesting hygrothermal properties. This very heterogeneous material is constituted by hemp particles embedded in a mineral binder. This paper focuses on the microscopic and hygromorphic characterization of hemp concrete based on non-destructive imaging techniques. X-ray tomography scans with different voxel sizes were performed on this material. The reconstructed volumes had a mean voxel size between 2.3 µm and 31.8 µm. 3D reconstructions of the real material showed that hemp concrete has several scales of porosity which depends on the orientation and position of the plant particles. Then, a tomography scan and SEM observations were made on the vegetable particle. The latter presents a complex and very porous microstructure. The hygromorphic behavior of hemp concrete under hydric solicitations was then studied. The technique consists in using X-ray tomography coupled to the digital volume correlation (DVC) to determine the three-dimensional strain fields in the studied three-dimensional volume. The results show a change in the internal morphology of hemp concrete subjected to different hygrometries. The humidification of the material leads to the appearance of anisotropic strains in the 3D volume. The strains of the hemp particles are greater compared to those of binder. In addition, the swelling of the hemp shiv causes the reduction of the porous space between the binder and the plant aggregates called interparticle porosity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hygrothermal properties of building materials · Recycling and utilization of industrial and municipal waste in materials production · Building materials and conservation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Mapping states’ Paris climate pledges: Analysing targets and groups at COP 2110.1016/j.gloenvcha.2017.11.002 ↗
2. European residential buildings and empirical assessment of the Hellenic building stock, energy consumption, emissions and potential energy savings10.1016/j.buildenv.2005.11.001 ↗
3. Assessment of the decrease of CO2 emissions in the construction field through the selection of materials: practical case study of three houses of low environmental impact10.1016/j.buildenv.2005.04.006 ↗
4. Bennai · 2017
5. 2013
6. Design of green concrete made of plant-derived aggregates and a pumice–lime binder10.1016/j.cemconcomp.2011.09.002 ↗
7. Properties of hemp fibre reinforced concrete composites10.1016/j.compositesa.2005.01.032 ↗
8. Life cycle assessment of a hemp concrete wall: Impact of thickness and coating10.1016/j.buildenv.2013.11.010 ↗
9. Characterization and comparison of hygric properties of rape straw concrete and hemp concrete10.1016/j.conbuildmat.2015.11.021 ↗
10. Hygric and thermal properties of hemp-lime plasters10.1016/j.buildenv.2015.11.013 ↗
11. Measurement of thermal properties of biosourced building materials10.1007/s10765-013-1477-0 ↗
12. Experimental characterization of thermal and hygric properties of hemp concrete with consideration of the material age evolution
13. Thermal conductivity of hemp concretes: variation with formulation, density and water content10.1016/j.conbuildmat.2014.05.039 ↗
14. Comparison of the hygric behaviour of three hemp concretes10.1016/j.enbuild.2013.03.010 ↗
15. Experimental investigation of moisture buffering capacity of sprayed hemp concrete10.1016/j.conbuildmat.2012.04.139 ↗
16. Characterization of flax lime and hemp lime concretes: Hygric properties and moisture buffer capacity10.1016/j.enbuild.2014.11.043 ↗
17. NMR and MRI observation of water absorption/uptake in hemp shives used for hemp concrete10.1016/j.conbuildmat.2016.07.100 ↗
18. Influence of accelerated aging on the properties of hemp concretes10.1016/j.conbuildmat.2016.11.129 ↗
19. Cóstola · 2009 · 316
20. Experimental highlight of hygrothermal phenomena in hemp concrete wall10.1016/j.buildenv.2014.09.018 ↗
21. Moisture buffer potential of experimental wall assemblies incorporating formulated hemp-lime10.1016/j.buildenv.2015.07.011 ↗
22. Mechanical properties of hemp-clay and hemp stabilized clay composites10.1016/j.conbuildmat.2017.08.121 ↗
23. 2017
24. Influence of temperature on sorption process in hemp concrete10.1016/j.conbuildmat.2015.12.117 ↗
25. Periodic homogenization for heat, air, and moisture transfer of porous building materials10.1080/10407790.2016.1230393 ↗
26. Convective and conductive thermal homogenization for nonsturated porous building materials: application on the thermal conductivity tensor
27. Nonwood bio-based materials
28. Computational up-scaling of anisotropic swelling and mechanical behavior of hierarchical cellular materials10.1016/j.compscitech.2012.02.001 ↗
29. Failure mechanisms of plasterboard in nail pull test determined by x-ray microtomography and digital volume correlation10.1007/s11340-016-0168-8 ↗
30. Damage investigation and modeling of 3D woven ceramic matrix composites from X-ray tomography in-situ tensile tests10.1016/j.actamat.2017.08.034 ↗
31. Full three-dimensional strain measurements on wood exposed to three-point bending: analysis by use of digital volume correlation applied to synchrotron radiation micro-computed tomography image data10.1111/j.1475-1305.2009.00687.x ↗
32. 3D micro-scale deformations of wood in bending: synchrotron radiation μCT data analyzed with digital volume correlation10.1016/j.jsb.2008.08.004 ↗
33. Bonnet · 2017 · 403
34. Cell wall thickness and tangential Young’s modulus in coniferous early wood10.1007/BF00777356 ↗
35. Hysteretic swelling of wood at cellular scale probed by phase-contrast X-ray tomography10.1016/j.jsb.2010.08.011 ↗
36. NIH Image to ImageJ: 25 years of image analysis10.1038/nmeth.2089 ↗
37. Digital volume correlation applied to X-ray tomography images from spherical indentation tests on lightweight gypsum: integrated digital volume correlation based on numerical fields10.1111/str.12101 ↗
38. Localized strain field measurement on laminography data with mechanical regularization10.1016/j.nimb.2013.09.033 ↗
39. Three-dimensional image correlation from X-ray computed tomography of solid foam10.1016/j.compositesa.2007.11.011 ↗
40. Fiber’s hygromorphic effect on thermal conductivity of wooden fibrous insulation characterized by X-ray tomography10.1016/j.conbuildmat.2017.06.013 ↗
41. Two Typical plant aggregates for bio-based concretes